Presentation is loading. Please wait.

Presentation is loading. Please wait.

Chapter 2 One-Dimensional Kinematics Dr. Haykel Abdelhamid Elabidi Website: uqu.edu.sa/staff/ar/4331237 Mobile: 0564518933.

Similar presentations


Presentation on theme: "Chapter 2 One-Dimensional Kinematics Dr. Haykel Abdelhamid Elabidi Website: uqu.edu.sa/staff/ar/4331237 Mobile: 0564518933."— Presentation transcript:

1 Chapter 2 One-Dimensional Kinematics Dr. Haykel Abdelhamid Elabidi Website: uqu.edu.sa/staff/ar/4331237 Email: haelabidi@uqu.edu.sa Mobile: 0564518933 4 th week of September 2013/DhQ 1434

2 Units of Chapter 2 Position, distance and displacement Average speed and velocity Instantaneous velocity Average and instantaneous acceleration Motion with constant acceleration Application of the equation of motion Freely falling objects

3 Position, distance, and displacement Kinematics is a part of mechanics that studies the motion of an object without considering the forces acting on it. Before describing motion, you must set up a coordinate system: define an origin and a positive direction.

4 Position, distance, and displacement The distance is the total length of travel; if you go from your house to the groceries or from the groceries to your house, you cover the same distance of 4.3 mi. Distance is always positive (it is a scalar). house friend’s house

5 Average speed and velocity Description of motion needs to consider how rapidly an object moves. This can be done by introducing the average speed ([L]/[T]): The average velocity tell us not only how fast an object is moving, it tells us the direction the object is moving.

6 calculate the average velocity every 10 mn is better than every 20 mn, every 2 mn is better than every 10 mn and so one. It is desirable to know the velocity at each instant of time. Instantaneous velocity The speedometer of your car indicates the instantaneous speed and not the instantaneous velocity. it can not give information about the direction of motion.

7 Average and instantaneous acceleration The average acceleration is the change in velocity divided by the change in time: Velocity and acceleration of an object have the same sign  the object accelerates Velocity and acceleration of an object have opposit signs  the object decelerates

8 Average and instantaneous acceleration Exercise 2-1 p27 (modified): a) A car goes from 0 to 60.0 mi/h in 6.2 s. What is the average acceleration of this car in m/s 2 ? b) An airplane has an average acceleration of 5.6 m/s 2 during takeoff. How long does it take for the plane to reach a speed of 65 m/s? (1 mi=1609 m)

9 Motion with constant acceleration Goal: Give the different equations for motion with constant acceleration and apply them.

10 Motion with constant acceleration Example 2-5 p32 (modified): A boat moves slowly with a constant speed of 1.50 m/s. After, it accelerates at 2.40 m/s 2. a) How fast is the boat moving after accelerating for 5.00 s? b) How far has the boat traveled in this time? c) At what time is the boat’s speed equal 10.0 m/s?

11 Motion with constant acceleration Example 2-6 p34: A drag racer starts from rest and accelerates at 7.40 m/s 2. How far has it travaled in 2.00 s? See also the Example 2-8 page 36

12 Freely falling objects Free fall is the motion of an object subject only to the influence of gravity positive direction

13 Example 2.10 p40: A person steps off the end of a 3.00-m-high diving board and drops to the water below. (a)How long does it take for the person to reach the water? (b)What the person’s speed on entering the water? Solution: (a) t=0,782 s, (b) v=7,67 m/s (from eq 2-7 or 2-12) Freely falling objects

14

15 Thank you for your attention See you next time Inchallah Homework:


Download ppt "Chapter 2 One-Dimensional Kinematics Dr. Haykel Abdelhamid Elabidi Website: uqu.edu.sa/staff/ar/4331237 Mobile: 0564518933."

Similar presentations


Ads by Google