1. Connecting to Secure Wi-Fi in QSB Boardroom Locations 01 September 2013

2. Windows 7 - Check Wi-Fi Connections This set-up applies to the secure Wi-Fi connection at the Queen’s School of Business boardroom locations only. Check you are able to see the wireless connection Take note of the network name: – Queensu_MBA_WPA2 – Queensu_TOR_WPA2 Do Not attempt to connect to the network

3. Windows 7 – Control Panel Open Start menu – Click on the Control Panel to open it

4. Windows 7 – Control Panel In Control Panel, select View Network Status and Tasks If you do not see this view, change the View by: to Category view

5. Windows 7 – Wireless Network Select Set up a new connection or network

6. Windows 7 – Manually Config Network Select Manually connect to a wireless network Click Next

7. Windows 7 – Manually Config Network Enter the Network Name that you observed on page 1 – Queensu_MBA_WPA2 – Queensu_Tor_WPA2 Change Security type: WPA2-Enterprise Change Encryption type: AES Select Start this connection automatically Click the Next button

8. Windows 7 – Manually Config Network Click Change connection settings

9. Windows 7 – Wireless Network Properties On the Connection tab: Select Connect automatically when this network is in range De-select all other options Select Security tab

10. Windows 7 – Wireless Network Properties On the Security tab Change Security type: WPA2-Enterprise Change Encryption Type: AES Change Choose a network authentication method Choosing the default Microsoft: Protected (PEAP) will not work – Cisco (PEAP) Select Settings

11. Windows 7 – PEAP Properties On the Connection Tab De-select Use anonymous outer identity: De-select Validate server certificate Select Enable Fast Reconnect Select User Credentials tab

12. Windows 7 – PEAP Properties On the User Credentials tab Select Use saved username and password Enter your NetID in to the Username field Enter your NetID password in to the Password and Confirm Password fields Click OK button

13. Windows 7 – Wireless Network Properties On the Security Tab Select Remember my credentials … if you do not want to enter your NetID every time you use this wireless connection Select Advanced settings

14. Windows 7 – Advanced Settings De-select Specify authentication mode: De-select Enable single sign on for this network Select the 802.11 settings tab

15. Windows 7 – Advanced Settings On the 801.11 settings tab Select Enable Pairwise Master Key (PMK)caching – PMK time to live = 720 – Number of entries = 128 De-select the other values Click the OK button

16. Windows 7 – Wireless Network Properties On the Security tab Click the OK button

17. Windows 7 – Manually Config Network Click the Close button

18. Windows 7 - Connecting From the System Tray click the wireless icon Select the WPA2 wireless network Queensu_MBA_WPA2 Click the Connect button. Be patient, it may take a few minutes for the connection to complete this first time.

19. Windows 7 - Connecting Select Public Network

20. Windows 7 - Connecting You are now connected to the WPA2 network Click the Close button You do not need to disconnect from this network before leaving the facility. If you saved your user name and password this connection should automatically connect the next time you are in the facility.