2. Acceptance Process for Manufactured Products by Certification: A users guide for implementation of Materials Bulletin No. MB 06-02, DCE Memorandum No. 29-02

5. What We Will Cover: Process Changes Process Changes Affected Documents Affected Documents QPL and Non-QPL Materials QPL and Non-QPL Materials Certifications will be covered in depth Certifications will be covered in depth Responsibilities of the Contractor Responsibilities of the Contractor Responsibilities of the Project Personnel Responsibilities of the Project Personnel Responsibilities of the Materials Office Responsibilities of the Materials Office

6. Process Change Standard Standard Specifications Sampling, Sampling, Testing and Reporting Guide Materials Materials Manual Certification Certification Sample Forms

7. Process Change Eliminates the pretest requirements or testing prior to incorporating these materials into the project as previously performed for traffic marking materials Eliminates the pretest requirements or testing prior to incorporating these materials into the project as previously performed for traffic marking materials The process permits the department to perform random sampling. The process permits the department to perform random sampling.

8. Standard Specifications Identify whether or not product acceptance is based on manufacturer certification Identify whether or not product acceptance is based on manufacturer certification Provide instructions for manufacturers to get their products on QPL Provide instructions for manufacturers to get their products on QPL

9. Section 6 6-5.12 Materials Accepted Based on Manufacturer’s Certification: The Engineer will accept certain manufactured products for use on Department Contracts upon receipt of a satisfactory certification stating that the product meets the acceptance criteria requirements of the Department’s specifications. Manufactured products whose acceptance is based on a manufacturer’s certification are so identified in the appropriate Division III Sections of these Specifications. The Engineer reserves the right to sample these materials in accordance with the provisions of this section. 6-5.12 Materials Accepted Based on Manufacturer’s Certification: The Engineer will accept certain manufactured products for use on Department Contracts upon receipt of a satisfactory certification stating that the product meets the acceptance criteria requirements of the Department’s specifications. Manufactured products whose acceptance is based on a manufacturer’s certification are so identified in the appropriate Division III Sections of these Specifications. The Engineer reserves the right to sample these materials in accordance with the provisions of this section. Manufacturers may obtain the sample certification forms through the Department’s web site. The URL for obtaining the certification forms is http://www11.myflorida.com/statematerialsoffice/Administration/Publications/ certifications/sampleforms.htm Manufacturers may obtain the sample certification forms through the Department’s web site. The URL for obtaining the certification forms is http://www11.myflorida.com/statematerialsoffice/Administration/Publications/ certifications/sampleforms.htm It is the sole responsibility of the Contractor to obtain, verify completeness and submit the certification to the Engineer before incorporating such manufactured products into the project. It is the sole responsibility of the Contractor to obtain, verify completeness and submit the certification to the Engineer before incorporating such manufactured products into the project.

10. Specification Changes QPL materials QPL materials –Existing QPL items –Additional QPL items Polyethylene SheetingPolyethylene Sheeting Delineator Post AssembliesDelineator Post Assemblies Expansion JointsExpansion Joints Guardrail reflectorsGuardrail reflectors Dust Control Calcium ChlorideDust Control Calcium Chloride Demountable sign face materialsDemountable sign face materials Laminated aluminum panel signsLaminated aluminum panel signs Non-QPL materials –Fencing –Guardrail –Dowel Bars –Fertilizer –Bridge Pads –Burlap

11. Specification 971-1.4 (old) No Longer Acceptable

12. Specification 971-1.4 (new) -Certification Requirement -Reference to Section 6

13. Certification Requirement 932-1.1.1 Certification: The Contractor shall provide the Engineer a certification conforming to the requirements of Section 6 from the manufacturer, confirming that the preformed joint filler meets the requirements of this Section.

14. QPL Requirement 932-1.1.2Qualified Products List : The preformed joint used shall be one of the products listed on the Department’s Qualified Products List (QPL). Manufacturers seeking evaluation of their product shall submit an application in accordance with Section 6.

15. Non-QPL Materials Incidental Materials Incidental Materials –Materials requiring only installation –Identified in material specs. –Manufacturer certification –Certification warranting In- place products (verification that products were used in accordance with manufacturer specifications) New Materials –Not specified in Dept. references –Innovative use of approved material –SMO authorization and acceptance criteria necessary prior to use –FHWA approval on Federal-Aid projects

16. Sampling, Testing & Reporting Guide

17. STRG Revisions Eliminate many material numbers Eliminate many material numbers Utilize verification testing for random samples Utilize verification testing for random samples Independent verification testing code for QPL evaluation Independent verification testing code for QPL evaluation Project acceptance Project acceptance –Certification form –On QPL (as applicable)

18. Materials Manual

19. Added section 5.6.13, titled :“ Verification of Manufactured Products” Added section 5.6.13, titled :“ Verification of Manufactured Products” –Includes sampling, inspection and testing Manual is referenced in CPAM Control of Materials Manual is referenced in CPAM Control of Materials –No change in Method of Acceptance categories

20. 5.4.5.1.3 Group 3: Manufactured Products. These materials are manufactured products listed in QPL, and are identified in individual material specifications. These materials are accepted based on manufacturer’s certification. The Contractor will submit individual certifications as the materials arrive on the project site. The Project Personnel will acknowledge receipt of all Certifications and compliance of the materials with the Specifications in the “Project Manager/ Resident Engineer’s Materials Statement” to the materials office. Material Manual Group 3

21. Material Manual Group 4 5.4.5.1.4Group 4: Incidental materials. These materials are manufactured products not listed on the QPL. In addition, any product/ material requiring only installation on the project site can be considered Incidental Materials. Such materials are identified in individual material specifications. These materials are accepted based on Manufacturer/ Producer’s certification. In addition to Manufacturer/ Producer’s certification, the Contractor will provide certification warranting the In-place products. The Contractor will provide one certificate covering all the materials used within the project limits detailing scope of work. The Project Manager/ Resident Engineer will certify that all Certifications were received and the materials were found in compliance with the Specifications. The Project Manager/ Resident Engineer will acknowledge receipt of all Certifications and compliance of the materials with the Specifications in the “Project Manager/ Resident Engineer’s Materials Statement” to the materials Office.

22. Certification Sample Form Requires direct FDOT specification reference (section and subsection) Requires recent date Requires notary seal Requires project number Requires QPL number (as applicable)

23. Sample Certifications Sample forms are available on internet @ http://www11.myflorida.com/statematerialsoffice/ Administration/Publications/certifications/samplef orms.htm Sample forms are available on internet @ http://www11.myflorida.com/statematerialsoffice/ Administration/Publications/certifications/samplef orms.htm Manufacturers may fill out forms in an approved format with direct specification reference Manufacturers may fill out forms in an approved format with direct specification reference

24. Certification Sample Forms 36 36 certification sample forms available online Raised Raised Pavements Marker certifications available July 2003

25. Related Action Items At least 50 material numbers removed 23 Pipe related material numbers not affected by this process Some additional follow-up specification revisions for 7/03

26. Certification Sample Forms

30. NO LONGER ACCEPTABLE

33. Proper Certification for Incidental Materials

36. HOW THE PROCESS WORKS

37. Contractor, Project Personnel, and Materials Office Responsibilities

38. How The Process Works The Contractor is responsible for the material used The Contractor is responsible for the material used The Contractor is responsible to receive the certification from the manufacturer The Contractor is responsible to receive the certification from the manufacturer The certification must be presented with the manufacturer’s letterhead The certification must be presented with the manufacturer’s letterhead

39. Contractor Responsibilities The Contractor is responsible to verify the completeness of the certification The Contractor is responsible to verify the completeness of the certification The Contractor is responsible to provide an acceptable certification to the Project Engineer before incorporating the material into the project The Contractor is responsible to provide an acceptable certification to the Project Engineer before incorporating the material into the project

40. Project Personnel Responsibilities Report the receipt of certifications Report the receipt of certifications Verify certification completeness, making sure QPL numbers are correct through the internet or LIMS Verify certification completeness, making sure QPL numbers are correct through the internet or LIMS Make sure batch number on certification matches the material’s batch number used in the project Make sure batch number on certification matches the material’s batch number used in the project Certification should NOT be accepted after incorporation into project Certification should NOT be accepted after incorporation into project

41. Project Personnel Responsibilities If the received certification does not meet the department’s requirements, the contractor is responsible for obtaining the correct certification, BEFORE incorporating the material into the project. If the received certification does not meet the department’s requirements, the contractor is responsible for obtaining the correct certification, BEFORE incorporating the material into the project. Any material used without proper certification will be considered a failure. Any material used without proper certification will be considered a failure.

42. Project Personnel The Project Engineer should make certifications available through the CDMS The Project Engineer should make certifications available through the CDMS The Project Engineer is responsible for making sure all certifications were received and that all materials are in compliance with the specifications The Project Engineer is responsible for making sure all certifications were received and that all materials are in compliance with the specifications

43. Materials Office Responsibilities The Materials Office is responsible for maintaining certification sample forms The Materials Office is responsible for maintaining certification sample forms The Materials Office is responsible for the random sampling of materials The Materials Office is responsible for the random sampling of materials When performing random sampling, the Materials Office will make sure all certifications are present and complete When performing random sampling, the Materials Office will make sure all certifications are present and complete

44. How Will I Know When To Take A Sample? The Materials section will notify personnel when a sample is required from the project. The Materials section will notify personnel when a sample is required from the project. The project engineer may pull a sample at anytime. The project engineer may pull a sample at anytime.