1. Company History “World Leader in Electro-Optical Flame Detection Technology”

2. TECHNICAL BACKGROUND  Aerospace Designers  Former Aerospace Production Personnel  Aerospace Design Experience:  Armored Vehicle Early Warning  Aircraft Self-Protection  Countermeasures  AAA Early Warning  Ground & Air-to-Air Missile Early Warning  Submarine Countermeasures

3. THREE Major Development Paths  High performance, high cost, digital UV, Wide Band IR, and visible sensors for high hazard industrial and military market segments.  Medium priced, digital UV, Wide Band IR and visible sensors for industrial market segment.  Low cost, indoor, analog, low current UV, Wide Band IR, and visible sensors for specific market segments.

4. High End Market  High performance, high cost, digital UV, Wide Band IR, and visible sensors for high end industrial and military market segments. The performance achieved with the SuperSentry I in 1983 is still unsurpassed by any known flame detector in the world (400 ft to detect a 3” diameter gasoline fire!)  This high cost market segment has not yet produced any significant sales due to very cost of the detector.  The engineering development in Wide Band IR and digital signal processing was utilized in the Middle End Industrial Market segment.

5. Medium Price Industrial Market Segment  Medium priced, digital, UV, Wide Band IR and visible sensors for industrial market segment with “Killark” housing and quartz window.  This engineering development led to the very successful FS2000 Fire Detection System with CM1 Controllers, COP-I Test Sources, and SS2 Multi-Spectrum family of detectors:  SS2-A for general industrial applications,  SS2-AH and SS2-AM ultra high speed response for airbag and munitions plants,  SD2 for private label.  SN2 for the NFS-1000 System for electrostatic powder systems.

6. Medium Price Industrial Market Segment (cont.)  The SS2 product development led to the very successful SS4 Multi-Spectrum family of detectors with built-in test source:  SS4-A for the general industrial market including aircraft hangars, truck loading racks, petro-chemical industry, silane gas fire protection, tank farms, etc.  SS4-AUV for applications specifying UV detection.  SS4-AS optimized for special fire detection applications: hydrogen, methanol, ethanol, and natural gas.

7. Finishing Market Segment  Fire Sentry’s product development led to the very successful FS10 Multi-Spectral family of detectors with Wide Band IR, Near Band IR, and Visible Sensors (no UV) and built-in test sources (Fire Early Warning, ALERT, and ALARM stages) - “Killark” housing with IR window:  FS System 10 with Wall-Mounted Controller for general finishing applications in both liquid and powder electrostatic paint spray booth and lines. Designed specifically to meet the revised May 1995 NFPA 33 code for the self-extinguishment of spray gun fires.  FS System 10 with Card Controller for the automotive finishing market, both powder and liquid.  FS10-R unitized flame detector with 2 stages and dry contact relay or 4-20 mA outputs for the powder and liquid finishing industry.

8. Clean Room Market Segment  Fire Sentry’s product development led to the very successful FS7 Multi-Spectral family of detectors with Wide Band IR, Near Band IR, and Visible Sensors (no UV) and built-in test sources (Fire Early Warning, ALERT, and ALARM stages) - FSC proprietary polypropylene housing:  FS7-2173 flame detector for clean room applications including wet benches. Requires FSC controller or Control Panels. Two stage output.  FS7-2173-2RP flame detector for stand-alone applications with 2 stages and dry contact relay output.  FS7-2175 and FSWB Control Panels for clean room applications.  FS7-SX Controller for clean room applications.

9. Low Cost Market  Low cost, indoor, analog, extremely low current UV, Wide Band IR, and visible sensors for specific market segments.  Led to the Room Sentry for homes, RV Sentry for recreational vehicles, Kitchen Sentry for kitchens, Stable Sentry for horses and livestock, Boat Sentry.  However, Room Sentry led to the very successful Clean Room Sentry: RS series, RS2 series, and SS3 flame detector series.

10. Super Sentry Fire Sensor - 1983 Super Sentry Fire Sensor - 1983 High Cost Market: Ultra Long Range UV, Analog and Digital Prototype Versions

11. Analog UV Room Sentry Breadboard - 1983 Low Cost Market : Ultra Low Current - less than 10 microamps, long life and stable

12. Original Analog UV Room Sentry Prototype -1983

13. First Production Analog UV Room Sentry - 1983

14. Digital Super Sentry I - 1984 High End Market: Long Range UV, Wide Band IR, Visible, FirePic, Tri-Mode Plot, FireBus

15. Digital Industrial Sentry - 1984 Medium Cost Market: Wide Band IR and UV, 180 Degree FOV and Digital Programmable Control Panel

16. Kitchen, RV, & Stable Sentry - 1984 Low Cost Market: Low Current, 9 volt Battery or 24 VDC, UV, Analog, 180 degree FOV with Horn

17. Boat Sentry - 1985 Low Cost Market: Low Current, 9 volt Battery or 24 VDC, UV Analog 180 degree FOV with Siren

18. Digital Industrial Sentry - 1985 Medium Cost Market: Wide 180 deg FOV, Wide Band IR, UV, VIS w/ FireBus, FirePic, Tri-Mode Plot

19. Clean Room Sentry Line - 1985 - 1987 First Major Success in Low Cost Market : Analog RS, RS2, and RS2D Series, and Digital SS3 Series

20. Dual Sentry - 1985 (Designed for Wireless Operation) Low Cost Market: Analog, Wide FOV, UV, Wide Band IR, 9 volt Battery or 24 VDC, Horn, Low Current

21. SS2 & SS4 Multi-Spectrum Flame Detectors - 1988+ SS2-A, SS2-AH, SS2-AM, SS4-A, SS4-AS, SS4-AUV w/ FireBus, FirePic, Tri-Mode Plot

22. FS System 10 Multi-Spectral Detector Line - FS 10 w/Card, FS 10 with Wall Mount Controller, FS 10-R Unitized

23. FS System 7 Fire Detector Line for Clean Rooms - FS7-2173, FS7-2173-2RP, SX Controller, FS7-2175 & WB Control Panels

25. http:\\www.firesentry.com “World Leader in Electro-Optical Flame Detection Technology”