Presentation is loading. Please wait.

Presentation is loading. Please wait.

Exploring CAD - Architectural Electrical Design. OVERVIEW TWO COMPONENTS –POWER –LIGHTS Power to House –Meter –Distribution Panel Box.

Similar presentations


Presentation on theme: "Exploring CAD - Architectural Electrical Design. OVERVIEW TWO COMPONENTS –POWER –LIGHTS Power to House –Meter –Distribution Panel Box."— Presentation transcript:

1 Exploring CAD - Architectural Electrical Design

2 OVERVIEW TWO COMPONENTS –POWER –LIGHTS Power to House –Meter –Distribution Panel Box

3 Installing Electrical – Power Duplex outlet (supplies power to rooms) –House electrical - interior Spaced no more than 12’ apart (including garage) Required on the walls 2’ or longer between doors Walls between 10’-12’ require at least two outlets Spaced no more 4’ apart over counter in kitchen –House electrical - exterior A Weather Proof (WP) outlet is required on each wall GFCI (Ground-fault circuit interrupter) protection from electrical shock –KITCHEN –All outlets (except refrigerator) –BATH – all outlets –Also required in garage and unfinished basements

4 Installing Electrical - Lighting Lighting- General –Each room requires a light controlled by a switch –Light switch must be on the handle side of the door –More than two entrances/exits require a Three Way switch –Split Wire Outlets are controlled by a switch Task Lighting –Task lighting required for: kitchen sinks (own light switch) bathroom sinks (own light switch) Lighting- Exterior –Light required for all exterior doors

5 Installing Electrical Symbols Switch Three Way Switch Light - ceiling Duplex Outlet Weather Proof Outlet Ground Fault Circuit Interrupter Range Outlet Duplex Split Wire Light - wall

6 Electrical Design Bedroom Split Wire Outlet Split Wire Switch General Switch Closet switch

7 Electrical Design Bath Fan General Switch Task Lighting GFIC Outlet Fan Switch Task Lighting Switch

8 Electrical Design Kitchen Wall Mounted Light GFIC Outlet Range Outlet Three Way Switch Task Light switch Wall Mounted Light Switch Task Light

9 Electrical Design Drawing a Polyline –Select Draw from the menu toolbar –Select Polyline –Click on the switch that you want to control the light

10 Electrical Design Once the line is made click on Modify, then Object and lastly click Polyline Next click on the line and then hit “F” (fit) then Enter

11 PRACTICE - BEDROOM/BATH

12 PRACTICE - KITCHEN

13 Practice - Exterior Door & Halls


Download ppt "Exploring CAD - Architectural Electrical Design. OVERVIEW TWO COMPONENTS –POWER –LIGHTS Power to House –Meter –Distribution Panel Box."

Similar presentations


Ads by Google