1. Pulley Lab Graph

2. 1.Get a blank sheet of graph paper

3. Graph 1.Draw Y axis 2.Draw X axis

4. Graph 1.Draw Y axis 2.Draw X axis

5. Graph 1.On the X axis, Write the range for the dependent variable, MA. 2.1 to 6

6. Graph 1.On the Y axis, write the range for the independent variable, EF in Newtons. 2.From 1.0 N to 11.0 N

7. Graph 1.For Pulleys 1 through 5 2.Plot the data points as EF and MA Do not write this data on your graph! This data will be found on the Data Table for each Pulley

8. Graph 1.Plot a data point for each pulley 2.5 pulleys, 5 data points!

9. Graph 1.In a nonlinear graph, lines are not drawn dot to dot through data points. 2.For our Line of Best Fit, the nonlinear graph is drawn to fit or include some but not all data points. 3.The Line of Best Fit should show the pattern described by the data

10. Graph 1.Line of Best Fit is a compromise. 2.To do it well you would have to understand what it is for. 3.Make the line VERY LIGHTLY and show it to Mr. Gussin if you are unsure.