2. Tek-CARE®400 P5 Features & Benefits
Power over CAT5 (P5)
Updated aesthetics
Multicolor LED dome lights
Duty station with 4 call LEDs
Pleasant call tones from duty station.
Flexible wiring
Bed interface
Large buttons
Auxiliary inputs and outputs
Resident station for ALF market
Check-in station for ILF market
Plug-in module quickly converts standard dome lamp into a zone light

3. NC402TS Master Station Features
Easy-to-use intuitive master with small footprint uses minimal desk space
Touchscreen color LCD display
No PC required
Built-in keyboard slides in for a small footprint
On-screen volume control
Membrane keypad
Pleasant call tones
Customizable call type labels, dome light colors, flash rates, tone and audio volume

4. NC402TS Master Station Screen Views
Two views available:
List View—Calls are displayed in a simple list. A separate column displays staff requests and presence.
Icon View—Rooms, zones, masters and systems are displayed as icons. Touch an icon to select that item.
There are two views available on the touchscreen. Touch the onscreen Switch View button to toggle between them.
Selection Methods—To perform most common master operations, select a subject (a station, a zone, a master, or the system) and then perform an operation on it. The onscreen Selection Indicator box displays the subject that is currently selected
System—To select all stations on the system, touch the onscreen SYSTEM button –or– touch the onscreen system icon –or– type the word “system.”
Master—To select all stations in this master’s assigned zones, touch the onscreen THIS MASTER button –or– touch the master’s onscreen icon –or– type the word “master” – or– type the master’s number. To select another master (but not its stations), touch the master’s onscreen icon –or– type the master’s number.
Clear any selection by pressing the onscreen CLEAR button next to the selection indicator. The box will eventually clear on its own.
List View
Icon View 4

5. NC401VFD Master Station Features
Best used as nurse workstation master
4×40-character Vacuum Fluorescent Display
Four-call display
Membrane keypad
Pleasant call tones
Customizable buttons, call type labels, corridor light colors, tone and audio volume
No PC required

6. IR411P5 Single Patient Station
Single DIN-style jack with call LED
Large grey reset button
UL® 1069 Listed and cUL® Listed
Control and power over CAT5 cable
Fully supervised wiring to the central equipment
Uses pillow speakers or pushbutton call cords
No dummy plugs needed to prevent “cord out” call
All stations are interchangeable
Simplified wiring with plug-in connectors
Full-duplex audio

7. IR412P5 Dual Patient Station
Two DIN-style jacks with individual call LEDs
Large grey reset button
UL® 1069 Listed and cUL® Listed
Control and power over CAT5 cable
Fully supervised wiring to the central equipment
Uses pillow speakers or pushbutton call cords
No dummy plugs needed to prevent “cord out” call
All stations are interchangeable
Simplified wiring with plug-in connectors
Full-duplex audio

8. SF401EX Strain Relief Cable
The SF401EX Strain Relief Cable is used to increase the life span of call cords, pillow speakers and room stations.
The cable is placed between the call cord or pillow speaker and the room station. If the call cord or pillow speaker is attached to a bed and then the bed is pulled away, the strain relief cable disconnects. This prevents damage to both the room station and the call cord or pillow speaker.
UL® 1069 Listed
Molded connectors
Clean break-away action
Increases life of call cords, pillow speakers and room stations

9. IR418P5 Resident Station 6’ cord for call placement Large reset button
Attractive design for all decors
UL® 1069 Listed and cUL® Listed
Control and power over CAT5 cable
Fully supervised wiring to the central equipment
All stations are interchangeable
Simplified wiring with plug-in connectors
Full-duplex audio

10. IR445P5 Resident Check-in Station
Programmable call button can be used for resident check-in
6’ cord for call placement
Large reset button
Attractive design for all decors
UL® 1069 Listed and cUL® Listed
Control and power over CAT5 cable
Fully supervised wiring to the central equipment
All stations are interchangeable
Simplified wiring with plug-in connectors
Full-duplex audio

11. IR410P5 Staff Station
Three programmable push buttons: Call, reset & emergency (by default)
UL® 1069 Listed and cUL® Listed
Control and power over CAT5 cable
Fully supervised wiring to the central equipment
All stations are interchangeable
Simplified wiring with plug-in connectors
Full-duplex audio

12. IR415P5 Duty Station
Four-LED indication of call level in the station’s zone!
Programmable call button.
Same pleasant call tones as the master station!
UL® 1069 Listed and cUL® Listed
Control and power over CAT5 cable
Fully supervised wiring to the central equipment
All stations are interchangeable
Simplified wiring with plug-in connectors
Full-duplex audio

13. IR400P5 Multipurpose Station
Support for switches, contact closures, speakers and other call originating devices
Attractive design for all decors
UL® 1069 Listed and cUL® Listed
Control and power over CAT5 cable
Fully supervised wiring to the central equipment
All stations are interchangeable
Simplified wiring with plug-in connectors
Full-duplex audio

14. P5 Peripheral Devices SF340B Emergency SF337C Bath
SF339 Emergency pushbutton
SF341B Code
SF350B Presence, two levels

15. LI484P5 Corridor Light
The LI484P5 Multicolor-LED Corridor Light provides visual indications of calls originating from patient, staff, duty, bath, emergency, presence and code call stations.
UL® 1069 Listed and cUL® Listed
Simplified wiring with plug-in connections
No bulb replacement needed
Excellent visibility
Fully supervised wiring to the central equipment

16. PM484ZP5 Zone Lamp Module
The PM484ZP5 Zone Light Module, when added to an LI484P5 Corridor Light, provides auxiliary visual annunciation for call activity within the zones and call types to which it is assigned. Patient priority and staff presence are indicated by four programmable LEDs.
UL® 1069 Listed and cUL® 1069 Listed
Ability to drive secondary lamp without zone lamp module
Plug-in connections
Inputs for bath & code switches
No bulb replacement needed
Excellent visibility
Supervised connections

17. System Layout

18. Integrations

19. Tek-BRIDGE™
The Tek-BRIDGE™ is the platform for Tek-MMARS®400 software and for software modules that interface to ancillary equipment and the facility’s network.
LS486 Tek-MMARS®400 Management, Monitoring and Reporting System software
Database logging of Nurse Call Activity
HTML-based Reporting Software— accessible via network connection
Back-up, Archive and Restore functions

20. Radio Pocket Paging
Both Automatic and Manual radio pocket paging options may be added to the system. By associating rooms with staff or zones, pages for incoming calls include the correct room, bed number and call type.
The Custom Paging options is easily handled using the NC402TS Master Station’s touchscreen and slide out keyboard. The user may define preprogrammed messages to speed up the action.
Three levels of pagers can be assigned: primary, secondary and tertiary—ensuring that calls are responded to.

21. LS453 Email Output Interface
Nurse call system notifications can now be sent to staff addresses, adding another means of communication.
Set up the mail server settings and add addresses
Once addresses are added, they can be assigned to staff via the Staff tab—just like a phone, pager, or badge.
This allows staff assignments to send nurse call messages via .

22. LS452 ADT Interface
Our LS452 ADT Interface Software using the HL7 Standard runs on the NC470 Tek-BRIDGE™ which is connected to both the Tek-CARE®400 Nurse Call System and the facility’s network.
The LS452 software receives patient information
from the facility’s Admit, Discharge, Transfer system
via the facility’s network. Patient name, room/bed
number and doctor name are then displayed on
NC402TS Touchscreen Master Stations.
Programming is quickly done via the included config tool.
Accessing a facility’s Hospital Information System maintains a focus on patient census information for use in nurse-call-related activities and on patient and bed data for bed management. Not only does this interface support efficient patient care by providing detailed patient information, but administration will benefit from monitoring and reporting features to ensure the facility is operating at an optimal level.

23. Media Gateway — VoIP Phone Interface
With the NC4654 Media Gateway, staff can use VoIP phones to:
place a call to a patient station,
automatically answer a patient call,
manually clear a routine level call,
page all stations or a single zone,
set a nurse or aide service request to a patient station,
set a STAT request to a patient station,
monitor a zone,
use nurse attend.

24. LS451 Versus Tracking Interface
Our LS451 Versus® Tracking Interface Software receives tracking badge locations from the Versus® Information System (VIS), and displays it on NC402TS Touchscreen Master Stations. Staff members wearing badges are automatically logged into patient rooms.