1. Installing VMware & the Data ONTAP Simulator SE Technical Academy

2. Installation Overview  Copy the trial version of vmware™ –When you return to your office you should request approval from your manager for a fully licensed version. You will be able to just plug in the serial number once you receive it. You will not have to reinstall. –http://se-web.corp.netapp.com/cgi- bin/form_engine/form_engine.pl/se_tools/iwant/inde x.html?conf=vm_licensehttp://se-web.corp.netapp.com/cgi- bin/form_engine/form_engine.pl/se_tools/iwant/inde x.html?conf=vm_license  Install vmware  Copy the Linux Image  Setup the simulator

3. Create a Directory on your machine  Create a directory somewhere on you machine called SETA  Copy all the files from the CD (provided by your instructor) to this new folder.

4. Double-click VMware-workstation-5  Double-click the VMware-workstation-5.Temp.exe to begin the VMware installation.

5. Accept all the defaults for the installation Enter the Serial #, Click Finish  Accept all the defaults for the VMware installation.  When prompted open VMWare_Temp_License.doc for the temporary Serial Number.

6. Double-click the RH_Linux9.exe file. Browse to My Virtual Machines Unzip

7. Copy/move the 7.0.0.1~~~.iso file to you’re My Virtual Machines folder.

8. Double-click RH_Linux9 folder Double-click RedHat_Linux9.vmx

9. Add this VM to your favorites VM | Add to Favorites

10. Set the CD-ROM iso file Follow the 7 steps, then click OK 1 2 3 4 5 6 7

11. Start the virtual machine 1

12. If you get either of these messages, Click OK

13. Start the virtual machine Keep the existing identifier 2

14. It may take a minute to look like this. Enter your login and password Login: root Password: netapp Login: root Password: netapp Note: Use Ctrl-Alt to move in and out of the simulator window.

15. Issue the following commands to mount the CD drive & begin simulator installation Accept defaults except where noted.

16. Continue Simulator Install Add 11 disks Accept defaults except where noted. As much as you have room for, in this case 11 Gigabytes

17. Simulator Installation Complete

18. Starting the Simulator cd /sim./runsim.sh

19. Hostname[]: Enter Something Here timezone [GMT]: US/Pacific New password: netapp netapp Accept defaults except where noted. Note: Hostname will show up as your CLI prompt “filer70>” in this case.

20. Defaults, netapp and 2 for Workgroup authentication. netapp Accept defaults except where noted.

21. Defaults and set another password netapp Accept defaults except where noted.

22. Congratulations! You have a filer, a simulated filer that is. netapp Accept defaults except where noted. Press the Enter key.

23. ifconfig –a To get your IP address for you filer

24. http://ipaddress of filer/na_admin http://ipaddress of filer/na_admin Launches FilerView for your simulator User: root Password: netapp User: root Password: netapp