1. July test beam DAQ status Marcin Byszewski Konstantinos Ntekas

2. Tracker (4x) XY chambers Tracker (4x) XY chambers Tracker (4x) XY chambers tracker (4x) XY chambers FPGA Eval Board FPGA Eval Board External Sci TRG 16x trigger LVDS micromegas (8x) X chambers micromegas (8x) X chambers micromegas (8x) X chambers micromegas (8x) X chambers micromegas (8x) X chambers micromegas (8x) X chambers micromegas (8x) X chambers micromegas (8x) X chambers 4 x HDMI ADC-Card (APV) ADC-Card (APV) FEC 2012 July Micromegas Test Beam Readout Schematics VMM1 events APV25 events Trigger data 10/07/2012 2 BNL DAQ card Avnet LX9 AZ Adapter Card VMM1 switch 16x New “C-Card” DCS HV/LV, T-H-P mmdaq PC SDC

3. DAQ schematics DAQ server Online monitor User Client mmdaq3-client commands C:> start C:> stop C:> configure Configuration-files APV, VMM data Root-file./mmdaq3-server –config-file=./config/server.xml Text log-file

4. Receiver DAQ schematics UDP receiver UDP frame EQ.ID + data Chip 1 Chip 2 Chip 3 FEC 1 FEC 2 1 2 EID; data Event-ID: Trg#, TS ? Decoder UDP Event data out-of-order APV Decoder: ZS, x-talk data EID Wait … Decoder Root writer BNL tree APV tree Unique address (channel, strip) Q, T, User data (APV) FEC Shared memory Online Monitor EB FEC

6. TODO list DAQ - write shared data to root apv tree + bnl tree (difficult) - write current config in Tenv (intermediate) - write text log file (easy) - prepare mmdaq3 configuration files (easy) (J.V.) - prepare slow control configuration files - Configuration tool (write xml) Hardware: - prepare fast network card (Gigabit) - prepare good quality network cable Tests of decoder + EB + root writer: - prepare DAQ PC for tests (not the old one in lab, mmdaqpc2 from H6) - single fec apv data - single fec bnl data - multiple fec (bnl, apv, bnl + apv) - speed, bottlenecks? Offline - fast analysis of finished run (one-command-script) See V.P.’s slides Event browser : Handle multiple types of raw trees (apv + bnl) (easy) Full detector event overview (intermediate) Overlay cluster results on raw data (difficult) Recomm : Handle multiple types of raw trees (apv + bnl) (difficult) Configuration files (intermediate) – filters – Clusterisation ( 0,10,20 angles) Can we use RD51’s tracker program ? Display results