1. Advanced DC Motor

2. Advanced DC Motor Info
Advanced D.C. Motors, Inc. combines years of DC motor building experience with tight quality control and a dedication to road-going electric vehicles that is unmatched by any other DC motor manufacturer. They are the most widely used DC motors in conversions, and for good reason.
Advanced D.C. motors feature:
Sealed bearings with high-temperature grease
Heavy-duty commutator construction
Heavy-duty brass brush boxes
Stainless steel brush springs
Brush life of approximately 80,000 miles
Easy brush replacement
1 1/8" keyed drive shaft
High-temperature molded field insulator
High-efficiency high-flow die cast aluminum fan

3. Advanced DC Motor Charts
Length “
Diameter- 8.0"
Weight lbs.
Input Voltage V
Efficiency -89.0%
Test 96 V Input
Time on Volts Amps RPM HP KW
5 min
1 hr
Continuous
Peak Horsepower
Test 120 V Input
Time on Volts Amps RPM HP KW
5 min
1 hr
Continuous
Peak Horsepower

4. Scott Motor

5. Scott Motor

6. Scott Motor Info Horsepower Rating- 1
RPM Voltage Amps- 41
Weight lbs. With Base Mount (Can be removed)
These motors are ideal for Electric Vehicles up to 400 lbs. including Driver weight

7. Etek Motor

8. Etek Curve

9. Etek Mechanical Dimensions

10. Etek-R motor

11. Etek-R Info Power - 8 cont-- 15 pk hp Voltage - 48V rated
Speed V unloaded
Size - 8" OD, 5.5" long (w/o shaft)
Shaft - 7/8"x 1-3/4", 3/16" key
Weight - 28 lbs.
Price - $450 

12. Mars motor

13. Mars Motor

14. Mars Brushless motor info.
10 kw peak power

15. Lemco Motor

16. Lemco

17. Lemco motor info.

18. Lemco motor info. Voltage Motor Current Power In Speed Torque
Power Out
Efficiency
Volts
Volts Shunt
Amps Shunt
Watts
Rpm Gen
Rpm Motor Nm
Kgm
K Watts %
24.40
3.70
12.33
0.30
1.30
0.13
0.21
69.20
21.52
10.40
34.67
0.75
4.70
0.48
0.65
86.53
21.41
14.80
49.33
1.06
6.80
0.69
0.91
86.20
21.30
19.30
64.33
1.37
9.10
0.93
1.19
86.68
21.25
21.00
70.00
1.49
9.90
1.01
1.28
86.05
21.20
23.10
77.00
1.63
11.00
1.12
1.41
86.10
21.18
24.70
82.33
1.74
11.80
1.20
85.70
21.08
28.20
94.00
1.98
13.50
1.38
1.68
84.62
21.02
31.00
103.33
2.17
14.90
1.52
1.82
83.87
20.91
35.40
118.00
2.47
17.10
2.04
82.61

19. Perm motor PMG 132

20. Perm 36V Curve

21. Perm 48V Curve

22. Perm 72V Curve

23. Perm Mechanical Dimensions

24. D&D Motor

25. D&D Motor

26. D&D Motor Info
These motors are designed and manufactured in Syracuse NY, USA, by 40 year professionals. Marketed as performance upgrades for golf cars, NEVs, and off-road buggies, Thunderstruck Motors sees their potential in a wide range of vehicle platforms. We've already put them in a large boat, an industrial truck, mountain climbing dune buggy, hot rod motorcycles. . . what's next? SepEx
<<What does the Separately Excited topology mean?>>
These motors are similar to the series wound ADC motors we've seen; they have the same dimensions and no permanent magnets. But instead of having the motor field in series with the armature (and carrying armature current), the field is a separate electric circuit that is controlled independently by the controller. This allows the controller to alter the field strength as needed by the load; so at low speed the field strength is stronger, providing maximum torque. Then, as speed increases and armature current falls, the field weakens to optimize efficiency and allow the top speed of the motor to increase.
As a bonus, the field is reversible, allowing re-gen braking! This reverse field then allows for reversing of the motor shaft without the need for external contactors or switches

27. D&D Motor SepEx Output

28. D&D Motor 72V Charts