1. Installation of Set Top Box (STB) Model: S-Box7203

2. What is STB?
STB = Set Top Box

3. Why do we need STB?
Digital Signal
Analog Signal
STB encode/decode the digital signal and provide the TV set with known analogue signal.

4. STB hardware Connection GuideTV
5. Connect the audio cable
STB
4. connect the network cable
6. Connect the power cord.
1. Connect the power.
2. Connect the DSL line
3. Turn on the Modem
HG 510

5. Configuring STB Through
STB Remote
Configuring STB Through
SET Command

6. Displaying the Configuration Page
By pressing the SET button will get the above login page
Enter the password (8288 by default)
Get the configuration main menu.

7. Configuration main menu

8. Saving the Configuration
All changes need a password to be saved. If "successful!" is displayed, it indicates that the configurations have been successfully saved. If "password error!" is displayed, enter the correct password and try to save again.

9. 1 - Network Configuration
The STB has three network access modes: Static IP, DHCP, and PPPoE. We can select one of them so as to match the type of network access provided at your premises.

10. Enter the following Parameters:
Static IP
Enter the following Parameters:
IP address
Subnet mask
DNS address
Gateway address
IGMP version of the switch
(this item needs to be configured for multicast services)

11. Static IP configuration page
(IGMP Internet Group Management Protocol)

12. PPPoE configuration page
We need to configure the following parameters:
PPPoE user name :
PPPoE password : xxxxx
IGMP version : IGMP v (Internet Group Management Protocol)

13. 2 - Browser Configuration

14. Browser Configuration
Home page:
It is the first Web page displayed when the STB is turned on. Usually, it is the EPG page.
Entry: we can select BTV or EPG.
If BTV is selected, the TV will display the last channel you watched last time.
If EPG is selected, the TV will display the first page of EPG.
Region:
Select a region, the warning language of STB will be changed to the language of the region you selected.

15. 3 - TV Standard Configuration

16. TV Standard Configuration
In the TV standard configuration, we can select TV standard and set video display region and other parameters,
TV standard:
We can select PAL or NTSC according to the EPG standards the ISP provided and your local TV standard.
Top margin:
The margin between the video display area and the top margin of the TV.
Left margin:
The margin between the video display area and the left side margin of the TV.
Width:
The width of the video display area.
Height:
The height of the video display area.

17. 4 - Time Configuration
(NTP - Network Time Protocol)
In the time configuration, set the time information of STB
Cur time: The current time displayed
Time zone: 5
Ntp time server:
Note: Please, insert the correct time zone and NTP, server without these settings TSTV will not work.

18. 5 - Software Information of STB

19. 6 - Hardware Information of STB

20. 7 - Upgrade Software of STB
This page lists the configuration for the auto upgrade of the STB.
We need to enter the upgrade address, as shown above.

21. 8 - Identity Information of STB
This page lists the identity information of the STB, including the MAC address and the product serial number. These parameters are set by the factory and cannot be changed.

22. 9 - Restore Parameter

23. CA card Installation (CA- Conditional Access)
Smartcard
The Smartcard with metal chipset down side has to insert into slot on front panel of STB. When the STB is switched on it authenticates the username and password associated with that particular CA card.
The user will not be able to view any services without entering of the IRDETO (encryption) CA card.
IRDETO provide CA Security Solution for Digital TV, IPTV and mobile
I.R. DE TOONDER the developer of M-Net decoder