Presentation is loading. Please wait.

Presentation is loading. Please wait.

21.11.2013 Petteri Sirén. Content Preface Locator/ID Separation Protocol (LISP) How LISP works Methods how LISP was studied Test cases Result Summary.

Published byMelvyn Small Modified over 9 years ago

Similar presentations

Presentation on theme: "21.11.2013 Petteri Sirén. Content Preface Locator/ID Separation Protocol (LISP) How LISP works Methods how LISP was studied Test cases Result Summary."— Presentation transcript:

1 21.11.2013 Petteri Sirén

2 Content Preface Locator/ID Separation Protocol (LISP) How LISP works Methods how LISP was studied Test cases Result Summary 28/11/2013Petteri Sirén2

3 28/11/2013Petteri Sirén3

4 Preface Why this study is done Reasons for the development of LISP Separation of location and identity EIDs and RLOCs 28/11/2013Petteri Sirén4

5 28/11/2013Petteri Sirén5

6 Locator/ID Separation Protocol Hosts operate the same way as before Core routers operate the same way as before Tunnel routers (CE/PE) perform tunneling Mapping system stores the EID-RLOC pairs Tunnel routers have map cache for EID-RLOC pairs Proxy tunnel routers are used between LISP sites and non-LISP sites 28/11/2013Petteri Sirén6

7 28/11/2013Petteri Sirén7

8 Host B 10.0.0.2 How LISP works Host A 10.1.0.11 Core B? -> Sent IP packet Src 10.1.0.11 Dst 10.0.0.2 ITR 1.1.1.1 From ITR to MS Where is 10.0.0.2? Mapping System From MS to ITR 10.0.0.2/24 is behind 2.2.2.2 28/11/2013Petteri Sirén8

9 Tunnel router EID table eid-table vrf Customer_A instance-id 101 database-mapping 10.1.0.0/16 x.t.r.1 priority 1 weight 100 database-mapping 10.1.0.0/16 x.t.r.2priority 2 weight 100 eid-table vrf Customer_B instance-id 102 database-mapping 10.1.0.0/16 x.t.r.1 priority 1 weight 50 database-mapping 10.1.0.0/16 x.t.r.2 priority 1 weight 50 eid-table default instance-id 0 database-mapping 10.1.0.0/16 x.t.r.1 priority 1 weight 100 28/11/2013Petteri Sirén9 LISP site xTR1 xTR2

10 28/11/2013Petteri Sirén10

11 Methods used to study LISP Tunnel routers were Cisco 800 series routers Mapping system and Proxy Tunnel router was Cisco ASR1000 Control messages were studied Map Request, Map Reply, Map Register LISP Security 28/11/2013Petteri Sirén11

12 28/11/2013Petteri Sirén12

13 Services tested Internet access IPv6 service Multihoming VPNs Back-up connection (Multi-attached) 28/11/2013Petteri Sirén13

14 LISP in VPN 28/11/2013Petteri Sirén14

15 28/11/2013Petteri Sirén15

16 Results Easy way to offer IPv6 services VPN works fine No renumbering needed when changing the location of the virtual machines SP core does not need to know the customers Adding new site is simple, only one tunnel router must be configured 28/11/2013Petteri Sirén16

17 28/11/2013Petteri Sirén17

18 Summary LISP devices: Tunnel routers, Proxy Tunnel routers & Mapping system Hosts utilize EIDs, routers use RLOCs Use cases: multihoming, no renumbering and a simple VPN solution Doesn’t solve the IPv4 address problem 28/11/2013Petteri Sirén18

19 More information RFC 6830-6836 www.lisp4.net 28/11/2013Petteri Sirén19

Download ppt "21.11.2013 Petteri Sirén. Content Preface Locator/ID Separation Protocol (LISP) How LISP works Methods how LISP was studied Test cases Result Summary."

Similar presentations

© Antônio M. Alberti 2011 Host Identification and Location Decoupling: A Comparison of Approaches Bruno Magalhães Martins Antônio Marcos Alberti.

© Antônio M. Alberti 2011 Host Identification and Location Decoupling: A Comparison of Approaches Bruno Magalhães Martins Antônio Marcos Alberti.
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 1 1 © 2010 Cisco and/or its affiliates. All rights reserved. LISP Mobility.

© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 1 1 © 2010 Cisco and/or its affiliates. All rights reserved. LISP Mobility.
Why do current IP semantics cause scaling issues? −Today, “addressing follows topology,” which limits route aggregation compactness −Overloaded IP address.

Why do current IP semantics cause scaling issues? −Today, “addressing follows topology,” which limits route aggregation compactness −Overloaded IP address.
CPSC 441 - Network Layer4-1 IP addresses: how to get one? Q: How does a host get IP address? r hard-coded by system admin in a file m Windows: control-panel->network->configuration-

CPSC Network Layer4-1 IP addresses: how to get one? Q: How does a host get IP address? r hard-coded by system admin in a file m Windows: control-panel->network->configuration-
Transitioning to IPv6 April 15,2005 Presented By: Richard Moore PBS Enterprise Technology.

Transitioning to IPv6 April 15,2005 Presented By: Richard Moore PBS Enterprise Technology.
Project by: Palak Baid (pb2358) Gaurav Pandey (gip2103) Guided by: Jong Yul Kim.

Project by: Palak Baid (pb2358) Gaurav Pandey (gip2103) Guided by: Jong Yul Kim.
© 2007 Cisco Systems, Inc. All rights reserved.Cisco Public 1 Addressing the Network – IPv4 Network Fundamentals – Chapter 6.

© 2007 Cisco Systems, Inc. All rights reserved.Cisco Public 1 Addressing the Network – IPv4 Network Fundamentals – Chapter 6.
IETF 72 – July 2008 Vince Fuller, Darrel Lewis, Eliot Lear, Scott Brim, Dave Oran, Noel Chiappa, John Curran, Dino Farinacci, and David Meyer LISP Deployment.

IETF 72 – July 2008 Vince Fuller, Darrel Lewis, Eliot Lear, Scott Brim, Dave Oran, Noel Chiappa, John Curran, Dino Farinacci, and David Meyer LISP Deployment.
CISCO NETWORKING ACADEMY Chabot College ELEC 99.05 Address Resolution Protocol.

CISCO NETWORKING ACADEMY Chabot College ELEC Address Resolution Protocol.
 As defined in RFC 826 ARP consists of the following messages ■ ARP Request ■ ARP Reply.

 As defined in RFC 826 ARP consists of the following messages ■ ARP Request ■ ARP Reply.
COM555: Mobile Technologies Location-Identifier Separation.

COM555: Mobile Technologies Location-Identifier Separation.
K. Salah 1 Chapter 31 Security in the Internet. K. Salah 2 Figure 31.5 Position of TLS Transport Layer Security (TLS) was designed to provide security.

K. Salah 1 Chapter 31 Security in the Internet. K. Salah 2 Figure 31.5 Position of TLS Transport Layer Security (TLS) was designed to provide security.
Oct 21, 2004CS573: Network Protocols and Standards1 IP: Addressing, ARP, Routing Network Protocols and Standards Autumn 2004-2005.

Oct 21, 2004CS573: Network Protocols and Standards1 IP: Addressing, ARP, Routing Network Protocols and Standards Autumn
1 Reminding - ARP Two machines on a given network can communicate only if they know each other’s physical network address ARP (Address Resolution Protocol)

1 Reminding - ARP Two machines on a given network can communicate only if they know each other’s physical network address ARP (Address Resolution Protocol)
CCNA Guide to Cisco Networking Fundamentals Fourth Edition Chapter 9 Network Services.

CCNA Guide to Cisco Networking Fundamentals Fourth Edition Chapter 9 Network Services.
© MMII JW RyderCS 428 Computer Networks1 Mapping Internet to Physical Addresses  2 machines on a physical network can only communicate if they know each.

© MMII JW RyderCS 428 Computer Networks1 Mapping Internet to Physical Addresses  2 machines on a physical network can only communicate if they know each.
© 2006 Cisco Systems, Inc. All rights reserved. MPLS v2.2—7-1 Integrating Internet Access with MPLS VPNs Implementing Internet Access as a Separate VPN.

© 2006 Cisco Systems, Inc. All rights reserved. MPLS v2.2—7-1 Integrating Internet Access with MPLS VPNs Implementing Internet Access as a Separate VPN.
SMUCSE 8344 MPLS Virtual Private Networks (VPNs).

SMUCSE 8344 MPLS Virtual Private Networks (VPNs).
LISP, SDN, and OpenDaylight

LISP, SDN, and OpenDaylight
Network Address Translation (NAT) CS-480b Dick Steflik.

Network Address Translation (NAT) CS-480b Dick Steflik.

Similar presentations

Ads by Google