1. Why Switched Reluctance Motors?

2. Let’s Focus on 3 Motor Types AC Induction Brushless DC Switched Reluctance

3. AC Induction Source: “AC, Brushless, Switched Reluctance Motor Comparisons” James R. Hendershot, Magna Physics Corporation

4. Brushless DC Source: “AC, Brushless, Switched Reluctance Motor Comparisons” James R. Hendershot, Magna Physics Corporation

5. Switched Reluctance Source: “AC, Brushless, Switched Reluctance Motor Comparisons” James R. Hendershot, Magna Physics Corporation

6. Dimensions, Volumes & Weight Comparisons of the 3 Motor Types (NEMA 184 T Frame) Source: “AC, Brushless, Switched Reluctance Motor Comparisons” James R. Hendershot, Magna Physics Corporation

7. Motor Comparison for BEVs & HEVs Source: “Advantages of Switched Reluctance Motor Applications to EV and HEV: Design and Control Issues” M. Ehsani, et al, IEEE Transactions on Industry Applications, Vol. 36, No 1, January/February 2000

8. What About Noise?

9. In Summary Due to the absence of rotor windings, SRM is very simple to construct, has a low inertia and allows an extremely high-speed operation. SRM operates in constant torque from zero speed up to the rated speed. Above rated speed up to a certain speed, the operation is in constant power. The range of this constant power operation depends on the motor design and its control. Designing a motor with high constant power range to base speed (e.g. at least 4:1), is not hard to achieve with SRM, and has a great effect in designing a lower power motor that can produce significant torque. The absence of rotor copper loss eliminates the problem that the induction motor has associated with rotor cooling due to its poor thermal effects. The absence of permanent magnets on the rotor eliminates the problem that the Brushless DC motor has with high temperature environments whereby the magnets can lose their magnetization. The SRM has many advantages, mostly resulting from its simple structure. SRM is normally low cost because of its extremely simple construction. Moreover, The SRM operation is extremely safe and the motor is particularly suitable for hazardous environments. The SRM drive produces zero or small open circuit voltage and short circuit current. Furthermore most SRM converters are simple because the current is unipolar. The SRM drive is immune from shoot through faults, unlike the inverters of induction and brushless dc motors. Due to the inductive nature of the motor, the power factor of the SRM is lower and requires a higher rated converter when compared to induction or BLDC motors.