2. Unpack From Box and Inventory Technical Bulletin User’s Manual Assembly Procedure Direct or Strap Pole Mounting Kit Face to Southern Sky High Temperature Sun Shield

4. Omni-Directional Indoor or Outdoor Mounting Direct Antenna Mount Omni-Directional Antenna Directional Antennas External Antenna Mount Remote Antenna ESTeem Mounted in Cabinet Cabinet Mount Configuration

5. 1. Verify Direct Ethernet Communication2. Verify ESTeem Configuration3. Check Antenna and Cable (SWR)4. Measure Receive Signal Strength5. Conduct Network Diagnostics

6. Time/Date Internal Temperature CPU and Ethernet Status Factory Troubleshooting Requests General Modem Information Associated Stations (Mobile Clients) Repeater Peers Multiple Status Screens All Radio Activity Seen on Same Channel View Peer Table

8. Fixed Access Point Locations Listed by Wireless MAC Address Value Listed in dBm Higher Noise Areas Need More Signal Receive Signal Strength Time of Last Radio Packet (Beacon or Data) Data Rate of Last Packet Status Packet vs Data Packet Last Receive Signal Detailed Log on All Packets Click on Repeater Peer MAC Address

9. Log Into Web Page Receive Signal Strength Station Router and Masquerade No Web Page Available Client Utility Separate Program Always Running Sets MAC Address for Connected Computer EtherStationLAN Card Utilities

10. Single or Used Frequency Channels Allows Faster Reconnect to Network Locking Channel Scanning Use Only Data Rate Needed Lower Data Rate = Greater Range Limit Data Rate Restrict to specific MAC addresses Interference immunity Access Control List

11. Receive signal strength RF data rate Network routing in mesh Document and Monitor RF Values from Commissioning Weatherproof boots Weatherproof seals Antenna Connections Annual Hardware Inspection