1. Tutorial on Machine vice
Hareesha N G
Dept of Aeronautical Engg
Dayananda Sagar College of Engg
Bangalore-78
4/20/2017
Hareesha N G, DSCE, Blore-78

2. Hareesha N G, DSCE, Blore-78
Machine vice Assembly
4/20/2017
Hareesha N G, DSCE, Blore-78

3. Exploded view of machine vice
4/20/2017
Hareesha N G, DSCE, Blore-78

4. Exploded view of machine vice
4/20/2017
Hareesha N G, DSCE, Blore-78

5. Hareesha N G, DSCE, Blore-78
Part 1: Body Step 1:Protrusion Sketch on front plane or XZ plane as shown in fig Symmetric protrusion distance 100 mm
4/20/2017
Hareesha N G, DSCE, Blore-78

6. Hareesha N G, DSCE, Blore-78
Step 2: Cut out Sketch on Top face or XY plane as shown in fig cut out depth 57 mm
4/20/2017
Hareesha N G, DSCE, Blore-78

7. Hareesha N G, DSCE, Blore-78
Step 3: Protrusion Sketch on Bottom face or XY plane as shown in fig protrusion distance 23 mm
4/20/2017
Hareesha N G, DSCE, Blore-78

8. Hareesha N G, DSCE, Blore-78
Step 4: Cut out Sketch on Top face or XY plane as shown in fig Cut out depth 23 mm
4/20/2017
Hareesha N G, DSCE, Blore-78

9. Hareesha N G, DSCE, Blore-78
Step 5: Protrusion Sketch on Side face or YZ plane as shown in fig protrusion distance 5 mm Mirror the above feature to the other face
4/20/2017
Hareesha N G, DSCE, Blore-78

10. Hareesha N G, DSCE, Blore-78
Step 6: Cut out Sketch on Bottom face or XY plane as shown in fig Cut out depth 10 mm for rectangle 60 X 165 Cut out depth 13 mm for rectangle 52 X 165
4/20/2017
Hareesha N G, DSCE, Blore-78

11. Hareesha N G, DSCE, Blore-78
Step 7: Hole Create hole 1 of diameter 20 mm and depth 45 mm Create hole 2 of diameter 12 mm and depth 20 mm Create hole 3 of diameter 3 mm and depth 40 mm
4/20/2017
Hareesha N G, DSCE, Blore-78

12. Hareesha N G, DSCE, Blore-78
Part 2: Movable Jaw Step 1:Protrusion Sketch on front plane or XZ plane as shown in fig Symmetric protrusion distance 100 mm
4/20/2017
Hareesha N G, DSCE, Blore-78

13. Hareesha N G, DSCE, Blore-78
Step 2: Cut out Sketch on side face or YZ plane as shown in fig Cut out depth 50 mm
4/20/2017
Hareesha N G, DSCE, Blore-78

14. Hareesha N G, DSCE, Blore-78
Step 3: Hole Create hole 1 of diameter 20 mm and depth 50 mm Create hole 2 of diameter 5 mm(2 holes deep 10 mm) Create hole 3 of diameter 5 mm(2 holes deep 10 mm)
4/20/2017
Hareesha N G, DSCE, Blore-78

15. Hareesha N G, DSCE, Blore-78
Part 3: Jaw Grip Sketch on Top plane or XY plane as shown in fig Symmetric protrusion distance 8 mm Create counter sink hole of diameter 6.3 mm, countersink dia of 12 mm
4/20/2017
Hareesha N G, DSCE, Blore-78

16. Hareesha N G, DSCE, Blore-78
Part 4: Screw M6 Step 1: Revolved protrusion Sketch on front plane or XZ plane as shown in fig Use revolve protrusion angle 1800
4/20/2017
Hareesha N G, DSCE, Blore-78

17. Hareesha N G, DSCE, Blore-78
Step 2: Cut out Sketch on Top face or XY plane as shown in fig Use cut out depth of cut 1.9 mm
4/20/2017
Hareesha N G, DSCE, Blore-78

18. Hareesha N G, DSCE, Blore-78
Part 5: Screw Rod Step 1: Revolved Protrusion Sketch on front plane or XZ plane as shown in fig Use revolve protrusion angle 1800
4/20/2017
Hareesha N G, DSCE, Blore-78

19. Hareesha N G, DSCE, Blore-78
Step 2: Cut out & Thread Sketch on Right plane or YZ plane as shown in fig Use symmetric cut out through all Create thread on cylindrical body
4/20/2017
Hareesha N G, DSCE, Blore-78

20. Hareesha N G, DSCE, Blore-78
Part 6: Washer Create sketch on top plane or XY plane as shown in fig Symmetric protrusion distance 3 mm
4/20/2017
Hareesha N G, DSCE, Blore-78

21. Hareesha N G, DSCE, Blore-78
Part 7: Nut Create sketch on Top plane or XY plane as shown in fig Symmetric protrusion distance 8 mm
4/20/2017
Hareesha N G, DSCE, Blore-78

22. Hareesha N G, DSCE, Blore-78
Part 8: Nut Create sketch on Top plane or XY plane as shown in fig Symmetric protrusion distance 5 mm
4/20/2017
Hareesha N G, DSCE, Blore-78

23. Hareesha N G, DSCE, Blore-78
Part 8: Clamping Plate Create sketch on Top plane or XY plane as shown in fig Symmetric protrusion distance 8 mm Create countersink hole of dia 6.3 mm and countersink dia 12 mm
4/20/2017
Hareesha N G, DSCE, Blore-78