1. LESSON-13 INTRODUCTION TO THE MEASURING AND MARKING TOOLS FOOT RULLARFOOT RULLAR “L” SQUARE“L” SQUARE MEASURE TAPEMEASURE TAPE FRENCH CURVEFRENCH CURVE PATTERN MASTERPATTERN MASTER DRESS FORMDRESS FORM NOTCHERNOTCHER PATTERN PANCHPATTERN PANCH

2. PIN [STAPIER PIN,PUSH PIN]PIN [STAPIER PIN,PUSH PIN] TAILOR CHALKTAILOR CHALK TRESSING WHELLTRESSING WHELL CELLOR TAPECELLOR TAPE TRIENGLETRIENGLE HIP CURVEHIP CURVE

3. FOOT RULLAR MADE IN WOODEN, PLASTIC AND MATEL.MADE IN WOODEN, PLASTIC AND MATEL. SIZE - 12” AND 30”.SIZE - 12” AND 30”. TO USE FOR DRAW A STRAIGHT LINE.TO USE FOR DRAW A STRAIGHT LINE.

4. “L” SQUARE MADE BY WOODEN AND FIBERMADE BY WOODEN AND FIBER TO MATCH A FABRIC IN 90`CORNERTO MATCH A FABRIC IN 90`CORNER SIZE :- SIZE :- LENGTH – 24” AND 60 C.MLENGTH – 24” AND 60 C.M WIDTH -12” AND 30 C.MWIDTH -12” AND 30 C.M

5. MEASURE TAPE MADE IN SMOOTH RUBBER OR FAERIC.MADE IN SMOOTH RUBBER OR FAERIC. SIZE:- 60” AND 152 C.M.SIZE:- 60” AND 152 C.M. AVAILABLE IN DIFFERENT COLOUR.AVAILABLE IN DIFFERENT COLOUR. TO USE FOR MEASURMENT.TO USE FOR MEASURMENT.

6. FRENCH CURVE MADE IN PLASTIC.MADE IN PLASTIC. TO GIVE A SHAPE IN ARMHOLE AND NECK LINE.TO GIVE A SHAPE IN ARMHOLE AND NECK LINE. TO GIVE A SHAPE IN COLLAR,POCKET,TO GIVE A SHAPE IN COLLAR,POCKET, CUFF AND SLEEVE.CUFF AND SLEEVE.

7. PATTERN MASTER IT IS MADE OF PLASTIC.IT IS MADE OF PLASTIC. ITS LENGTH IS 40 C.M.ITS LENGTH IS 40 C.M. ITS USED TO DRAW A STRIGHT LINE, CURVE LINE AND ANGLEITS USED TO DRAW A STRIGHT LINE, CURVE LINE AND ANGLE

8. DRESS FORM ITS CALLED MODELFORM OR DAMIES.ITS CALLED MODELFORM OR DAMIES. IT IS TWO TYPES HALF AND FULLIT IS TWO TYPES HALF AND FULL FOR LADIES GARMENT SIZE 8,10,12,14 AND 16.FOR LADIES GARMENT SIZE 8,10,12,14 AND 16. FOR GENTS GARMENTS SIZE 38,40,42.FOR GENTS GARMENTS SIZE 38,40,42. FOR CHILDREN GARMENTS SIZE 4,6.FOR CHILDREN GARMENTS SIZE 4,6.

9. NOTCHER AND PATTERN PANCH TO USE FOR NOTCH ON PAPER CUTTING.TO USE FOR NOTCH ON PAPER CUTTING. TO USE FOR PUNCHING THE PATTERN TO MADE FORM THICE PAPER SEET.TO USE FOR PUNCHING THE PATTERN TO MADE FORM THICE PAPER SEET.

10. PIN STAPLER PIN:-STAPLER PIN:- VARIOUS TYPES OF PINS- ROUND,SIMPLE,PURL AND T-HEAD.VARIOUS TYPES OF PINS- ROUND,SIMPLE,PURL AND T-HEAD. TO MADE FROM STEEL.TO MADE FROM STEEL. TO USE IN DRAFTING AND DRAPPING.TO USE IN DRAFTING AND DRAPPING. PUSH PIN:-PUSH PIN:- LENGTH-1/2”LENGTH-1/2” TO MADE FROM METAL AND PLASTIC.TO MADE FROM METAL AND PLASTIC.

11. TAILOR CHALK VERY SMOOTH AND SHARP.VERY SMOOTH AND SHARP. AVILABLE IN DIFFERENT COLOUR.AVILABLE IN DIFFERENT COLOUR. TO USE IN DRAW A DIAGRAM ON CLOTH.TO USE IN DRAW A DIAGRAM ON CLOTH.

12. TRESSING WHELL MADE FOR WOODEN AND PLASTIC.MADE FOR WOODEN AND PLASTIC. TO USE MARKING FOR ONE PATTERN TO ANOTHER PATTERN.TO USE MARKING FOR ONE PATTERN TO ANOTHER PATTERN.

13. CELLOR TAPE TO MADE FROM PLASTICK AND PAPER.TO MADE FROM PLASTICK AND PAPER. IT IS USE WHEN THE PATTERN IS CUT.IT IS USE WHEN THE PATTERN IS CUT.

14. TRIENGLE THIS IS THREE SIDE’S TOOLS.THIS IS THREE SIDE’S TOOLS. TWO SIDE’S LENGTH IS SAME AS.TWO SIDE’S LENGTH IS SAME AS. IT IS MEET ON 90 DEG ANGLE.IT IS MEET ON 90 DEG ANGLE. USE TO DRAW A BIES LINE AND CORNER ON THE PATTERN.USE TO DRAW A BIES LINE AND CORNER ON THE PATTERN.

15. HIP CURVE LENGTH-24”,60 C.MLENGTH-24”,60 C.M SLIDE ROUND SHAPESLIDE ROUND SHAPE MEASURMENT IN C.M AND INCHMEASURMENT IN C.M AND INCH TO USE FOR NECK LINE,ARMHOLE, WEST LINE ETC…TO USE FOR NECK LINE,ARMHOLE, WEST LINE ETC…