1. MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration Chapter 9 Network Policy and Access Services in Windows Server 2008

2. Objectives Configure routing in Windows Server 2008 Configure Routing and Remote Access Services in Windows Server 2008 Describe Network Policy Server Discuss wireless networking with Windows Server 2008 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration 2

3. Configuring Routing in Windows Server 2008 Routing and Remote Access Services (RRAS) –Role service used to configure and manage network routing in Windows Server 2008 –Recommended for use in small networks that require simple routing directions –Not recommended for large and complex environments 3 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

4. Configuring Routing in Windows Server 2008 (continued) Activity 9-1: Installing a Windows Server 2008 Member Server Time Required: 75 minutes Objective: Install a Windows Server 2008 member server 4 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

5. Configuring RRAS as a Router Routers –Responsible for forwarding packets between subnets, or networks with differing IP addressing schemes 5 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

6. 6

7. Configuring RRAS as a Router (continued) Activity 9-2: Installing RRAS on MSN-SRV-0XX and MSN-SRV-1XX Time Required: 15 minutes Objective: Install RRAS 7 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

8. Working with Routing Tables Routing tables are composed of routes Routes –Direct data traffic to its destination based on the information it contains Routing tables –Can be managed in the RRAS console or from the command line using the route command 8 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

9. Working with Routing Tables (continued) Activity 9-3: Viewing the Routing Table in RRAS Time Required: 5 minutes Objective: View the routing table in RRAS 9 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

10. 10 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

11. Configuring Routes Static routing is limited for the following reasons –Requires manual creation and management –Should not be used on networks with more than 10 subnets –All affected routers require reconfiguration if the network changes 11 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

12. Configuring Routes (continued) Activity 9-4: Creating a Static Route Time Required: 15 minutes Objective: Create a static route from the command line 12 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

13. Configuring Routes (continued) Dynamic protocols –Route traffic based on information they discover about remote networks from other routers Routing Information Protocol version 2 (RIPv2) –Uses partner routers, or RIP neighbors, in determining the dynamic routes it can use for forwarding packets of data 13 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

14. Configuring a DHCP Relay Agent DHCP relay agent –Manages the communication between a network’s DHCP server and clients on subnets without a DHCP server With RRAS –Network adapters are added and configured to listen for DHCP broadcast messages 14 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

15. Configuring a DHCP Relay Agent (continued) Activity 9-5: Configuring MSN-SRV-0XX as a DHCP Relay Agent Time Required: 15 minutes Objective: Install a DHCP relay agent 15 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

16. Configuring Dial-on-Demand Routing Demand-dial routing –Allows a server to initiate a connection only when it receives data traffic bound for a remote network –Can use dial-up networks instead of more expensive leased lines 16 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

17. Configuring Remote Access Services in Windows Server 2008 Dial-up networking –Connects remote users to their networks using a standard phone line Virtual Private Networks –Allow client connections to your network from remote locations –Works by creating a secure tunnel for transmitting data packets between two points –VPN tunneling protocols: Point-to-Point Tunneling Protocol, Layer 2 Tunneling Protocol, Secure Socket Tunneling Protocol 17 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

18. 18 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

19. Configuring Remote Access Services in Windows Server 2008 (continued) Activity 9-6: Installing Remote Access Support for VPNs in RRAS Time Required: 15 minutes Objective: Install Remote Access Support with VPN in RRAS 19 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

20. 20 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

21. Configuring Remote Access Services in Windows Server 2008 (continued) Activity 9-7: Configuring VPN Ports Time Required: 15 minutes Objective: Configure VPN ports 21 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

22. Network Address Translation Allows you to shield internal IP address ranges from public networks by allowing internal clients to access the Internet through a shared IP address 22 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

23. 23 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

24. Introduction to Network Policy Server Network Policy Server (NPS) –Role service that provides a framework for creating and enforcing network access policies for client health –Can be used to perform: Configure a RADIUS server Configure a RADIUS proxy Configure and implement Network Access Protection (NAP) 24 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

25. Windows Server 2008 Editions and the NPS Console NPS Console –Central utility for managing RADIUS clients and remote RADIUS servers Network health and access policies NAP settings for NAP scenarios Logging settings 25 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

26. Windows Server 2008 Editions and the NPS Console (continued) Activity 9-8: Installing NPS Time Required: 15 minutes Objective: Install the NPS role service 26 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

27. Windows Server 2008 Editions and the NPS Console (continued) Activity 9-9: Creating a Network Access Policy for VPN Connections Time Required: 15 minutes Objective: Create a network access policy 27 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

28. Introduction to RADIUS RADIUS –Industry-standard protocol that provides centralized authentication, authorization, and accounting for network access devices Components of RADIUS –RADIUS clients –Network access servers –RADIUS proxy –RADIUS server –User account database 28 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

29. 29 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

30. 30 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

31. 31 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

32. 32 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

33. RADIUS Server Used on networks to perform authentication, authorization, and accounting for RADIUS clients RADIUS client –Can be an NPS, which replaces the IAS from previous versions of Windows Server 33 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

34. RADIUS Server (continued) RADIUS –Standardized network protocol that centralizes the following process for user connections Authentication Authorization Accounting 34 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

35. RADIUS Proxy NPS –Can be configured as a RADIUS proxy RADIUS proxies –Route RADIUS messages between RADIUS clients and RADIUS servers 35 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

36. NAP Network Access Protection (NAP) –Provides a tool for you to block external and internal network threats –Can be broken into three parts Health policy validation Health policy compliance Limited access 36 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

37. Authentication Protocol Supported authentication protocols in Windows Server 2008 –Extensible Authentication Protocol–Transport Layer Security (EAP-TLS) –Protected Extensible Authentication Protocol– Transport Layer Security PEAP-TLS –Protected PEAP–Microsoft Challenge Handshake Authentication Protocol version 2 (PEAP- MSCHAPv2) 37 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

38. Wireless Access Configuration in Windows Server 2008 802.1x standard –Developed by the Institute of Electrical and Electronics Engineers (IEEE) On 802.1x networks –Network access control provides an authentication mechanism to allow or deny network access based on port connection 38 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

39. Wireless Access Configuration in Windows Server 2008 (continued) Categories of EAP implementations –EAP over local area network (LAN) –EAP over wireless 802.1x uses a three-component model for authenticating access to networks –Supplicant –Authenticator –Authentication server 39 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

40. 40 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration

41. Summary RRAS –Role service used to configure and manage network routing in Windows Server 2008 Routers –Responsible for forwarding packets between subnets, or networks with differing IP addressing schemes To process traffic –Router uses routing tables to determine where to send traffic MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration 41

42. Summary (continued) Routers –Use dynamic routing protocols and preconfigured static routes to deliver packets using the best route possible between two subnets Most modern networks –Support the passing of DHCP broadcast messages between subnets without a DHCP server to subnets that contain a DHCP server Demand-dial routing –Allows a server to initiate a connection only when it receives data traffic bound for a remote network MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration 42

43. Summary (continued) VPNs –Provide secure network access for remote clients over the Internet through the use of tunneling protocols NAT –Allows you to shield internal IP address ranges from public networks NAP –Provides a framework for you to block external and internal network threats 43 MCTS Guide to Microsoft Windows Server 2008 Network Infrastructure Configuration