Presentation is loading. Please wait.

Presentation is loading. Please wait.

Module 6: Workplace & Chemical Hazards 6.4 PCB Susan Harwood Grant Number SH-17820-08-60-F-23 Shipbreaking.

Similar presentations


Presentation on theme: "Module 6: Workplace & Chemical Hazards 6.4 PCB Susan Harwood Grant Number SH-17820-08-60-F-23 Shipbreaking."— Presentation transcript:

1 Module 6: Workplace & Chemical Hazards 6.4 PCB Susan Harwood Grant Number SH-17820-08-60-F-23 Shipbreaking

2 Disclaimer This material was produced under grant number SH- 17820-08-60-F-23 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or polices of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government. 2

3 Objectives 3 Identify the chemical hazards List potential locations Explain what PPE may be required Describe the effects of chronic exposure

4 4

5 5

6 PCBs means polychorinated biphenyls. Figure 1 Container of wiring being processed 6

7 209 individual chlorinated compounds make up the chemical PCB. Figure 2 Vessel in slip awaiting for dismantling 7

8 It comes in an oily liquid or solids that range from colorless to yellows. Figure 3 PCB wiring in roll off box 8

9 There is no associated taste or smell. Figure 4 PCB shredder operation 9

10 The PCB makes good insulators. Figure 5 Close up view of electrical wiring 10

11 In 1977, the U.S. outlawed the manufacturing of PCB. Figure 6 Roll off box container for electrical wiring 11

12 12

13 Lubricants in transformers. Figure 7 Storage area for PCB’s and mercury 13

14 Electrical wiring that runs throughout the ship and inside wiring of equipment. Figure 8 Electrical wiring in the engine room 14

15 Capacitors Figure 9 Electrical components in drum 15

16 Prior to 1977 fluorescent lighting may contained PCB. Figure 10 Recycled lighting in container 16

17 Vacuum pump fluids Figure 11 pumps in the engine room 17

18 18

19 Limits for air contaminants is 0.5 mg/m3 Figure 12 Engine room near the generator 19

20 Protective clothing to reduce skin contact. Figure 13 Worker in protective clothing on board vessel 20

21 Respirators when potential for airborne contaminates exist. Figure 14 Full faced respirator 21

22 Face shield or goggles to prevent contact with face or eyes. Figure 15 Face shield and secondary eye protection 22

23 Chemical resistant gloves and boots should be worn if exposure to liquid has been identified. Figure 16 Rubber gloves sealed to suit 23

24 Ensure adequate ventilation when working in a confined space. Figure 17 Ventilation unit on containment 24

25 25

26 Studies conclude that liver damage occurs with PCB exposure. Figure 18 Containment exercise 26

27 Impairs reproductive systems. Figure 19 Crowd of people in park 27

28 Some studies concluded that exposure increases risk of cancer. Figure 20 Roll off container of water collected on board 28

29 Exposure to skin may causes rashes Figure 21 Exercise in containment barriers 29

30 Behavior problems associated with motor skills and short-term memory. Figure 22 Breaking down containment room after exercise 30

31 31

32 32

33 References OSHA eTool www.osha.govwww.osha.gov Wikipedia Encyclopedia http://en.wikipedia.orghttp://en.wikipedia.org Agency for Toxic Substances & Disease Registry www.atsdr.cdc.gov www.atsdr.cdc.gov 33

34 34 Worker safety is a priority.


Download ppt "Module 6: Workplace & Chemical Hazards 6.4 PCB Susan Harwood Grant Number SH-17820-08-60-F-23 Shipbreaking."

Similar presentations


Ads by Google