1. Writing Equations of Lines Starting with Point – Slope Form y – y 1 = m (x – x 1 )

2. All the slides in this presentation are timed. Trying to advance the slides before you are asked to do so will result in skipping part of the presentation on that slide. When each slide is finished a box will appear to let you know there is nothing left on that slide. DONE

3. Point – Slope Form To write an equation of a line in point – slope form, all you need is … … Any Point On The Line … … The Slope … (x 1, y 1 ) m Once you have these two things, you can write the equation as y – y 1 = m (x – x 1 ) That’s “y minus the y-value of the point equals the slope times the quantity of x minus the x-value of the point”. Note: This equation is not in function form … more on that later. DONE

4. Example #1 Write the equation of the line that goes through the point (2, –3) and has a slope of 4. Point = (2, –3) Slope = 4 y – y 1 = m (x – x 1 ) y + 3 = 4 (x – 2) Starting with the point – slope form Plug in the y-value, the slope, and the x-value to get Notice, that when you subtracted the “–3” it became “+3”. DONE

5. Example #2 y – y 1 = m (x – x 1 ) Starting with the point – slope form Plug in the y-value, the slope, and the x-value to get Notice, that when you subtracted the “–4” it became “+4”. Write the equation of the line that goes through the point (–4, 6) and has a slope of. Point = (–4, 6) Slope = y – 6 = (x + 4) DONE

6. Example #3 Write the equation of the line that goes through the points (6, –4) and (2, 8). Point = (6, –4) Slope = –3 y + 4 = –3 (x – 6) We have two points, but we’re missing the slope. Using the formula for slope, we can find the slope to be Point = (2, 8) Slope = –3 To use point – slope form, we need a point and a slope. Since we have two points, just pick one … IT DOESN’T MATTER … BOTH answers are acceptable… more on why later. y – 8 = –3 (x – 2) Using the first point, we have,Using the second point, we have, y 2 – y 1 x 2 – x 1 DONE

7. Other Forms of Linear Equations So far, we have discussed only point-slope form. There are other forms of equations that you should be able to identify as a line and graph if necessary. Horizontal Line: y = c, where c is a constant. Vertical Line: x = c, where c is a constant. Slope – Intercept Form: y = mx + b Standard Form: Ax + By = C To write equations in the last two forms, start in point – slope form and rearrange the variables to match the correct format. The next few slides will cover how to do this. m = the slope of the line … b = the y-intercept Example: y = 3 Example: x = –6 Example: y = 3x – 6 A, B, and C are integers. Example: 3x + 4y = –36 DONE

8. Writing Equations in Slope – Intercept Form y + 4 = –3 (x – 6)y – 8 = –3 (x – 2) Earlier (click here to review) we wrote an equation of the line that went through the points (6, –4) and (2, 8). Sometimes, we want the line written in a different form.click here to review To change a point-slope equation in slope-intercept form, solve for y and simplify the right side of the equation. - Solve for y: Add or subtract the y-value of the point to both sides - Simplify: Distribute the slope and then combine like terms. Here are the two answers we had from the earlier example. SOLVE FOR y Subtract 4 from both sidesAdd 8 to both sides y = –3 (x – 6) – 4y = –3 (x – 2) + 8 SIMPLIFY Distribute –3 and combine like terms Distribute –3 and combine like terms y = –3x + 18 – 4 y = –3x + 14 y = –3x + 6 + 8 y = –3x + 14 Notice … They’re the same! DONE

9. Example #4 Write the equation of the line in slope-intercept form that goes through the point (6, 2) and has slope. Begin in point-slope form: y – 2 = (x – 6)y = (x – 6) + 2 Distribute: y = x – 4 + 2 Combine Like Terms: y = x – 2 Add 2 to both sides DONE Solve for y:

10. Writing Equations In Standard Form The last form of a linear equation we are going to cover is called Standard Form. Ax + By = C, where A, B, and C are integers. If you needed to write an equation of a line in standard form, you would start in point-slope form or slope-intercept form, depending on what information you are given. In both cases, you must put all variables on the left side and all constant values on the right side. If any of the coefficients (A, B, or C) are NOT integers, then you must eliminate any fractions or decimals by multiplying every term in the equation by the appropriate factor. DONE

11. Example #5 Rewrite each of the equations below in standard form. y – 6 = (x + 4) y = x – 4 Subtract from both sides. Multiply ALL terms by 3 in order to eliminate the fraction. –2x + 3y = –12 Multiply ALL terms by 2. – 3x + 2y = 24 Distribute Subtract from both sides, and add 6 to both sides. DONE

12. y as a FUNCTION of x For an equation to be written as a function, you must solve for y. Solving for y means that “y is written as a function of x ”. When your equation is in point – slope form simply add or subtract the y-value of the point to the other side. y + 3 = 4 (x – 2) From our first example we had In order to write y as a function of x we subtract 3 from both sides of the equation. y = 4 (x – 2) – 3 When you write y as a function of x, you have put your equation in function form. You may replace the y with the notation f (x) … read “f of x ” or “function of x ”. f (x) = 4 (x – 2) – 3 DONE Of the three types of linear equations discussed in this presentation, only slope- intercept form is written as a function.