1. Ordering and Carrying Costs
The Total-Cost Curve is U-Shaped
Annual Cost
Ordering Costs QO
(optimal order quantity)
Order Quantity (Q)

2. Total Cost Cost Adding Purchasing cost doesn’t change EOQ TC with PD
TC without PD PD
EOQ
Quantity

7. Quantity Discount
By quantity discount, we mean the price per unit decreases as order quantity increases.
When quantity discounts are offered, there is a separate, U-shaped, total cost curve for each unit price.
When unit price decreases, the total cost curve drops.
A different total cost curve is applied to each price.
If we have quantity discount, then we should weigh the benefit of price discount against the increase in inventory cost.

8. Example Demand for a product is 816 units / year ==> D = 816
Ordering cost is $12 / order ==> S = 12
Carrying cost is $4 / unit / year ==> H = 4
Price schedule is as follows
Quantity (Q) Price (P)
100 or more 16
What is the best quantity that we could order to minimize our total annual cost?

9. Total Cost Including Purchasing Cost
EOQ
Quantity

10. Total Cost with different Purchase Price
Smaller unit prices will raise total cost curve less than larger unit prices.
For each price, there is a separate U-shaped total cost curve for total cost.
Note that no single curve is applied to the entire range of quantities.
Each curve is applied to a portion of the range.

11. Quantity Discount Large quantity purchases
Price Discount - purchasing cost
Fewer orders - Ordering costs
More inventory - inventory cost
Our objective is to minimize the total annual costs
TC = SD/Q + HQ/2 + PD
In our initial model we assumed price is fixed. Therefore we did not include PD in the model.

12. Total Cost With Price Discount
EOQ p4
Quantity

13. Total Cost Including Purchasing Cost
EOQ
Quantity

14. Total Cost Including Purchasing Cost
The applicable or feasible total cost is initially on the curve with the highest unit price and then drops down curve by curve at the price breaks.
Price breaks are the minimum quantities needed to obtain the discounts.
If carrying cost is stated in terms of cost / unit of product / year, there is a single EOQ which is the same for all cost curves.

15. Solution Procedure
1- Compute EOQ without price considerations. This EOQ is
the same for all prices.
2- But this EOQ is feasible for only one price. Identify the corresponding price and quantity.
3-If EOQ is feasible for the lowest price ==>it is the solution. If it is not, then calculate:
a) TC for EOQ and corresponding feasible price.
Note that TC is…
TC = HQ/2 + SD/Q +PD
b) calculate TC for all Qs of price break after the above prices.
Compare their TC to find the best Q ==>it is the solution.

16. Total Cost Including Purchasing CostQ p3
EOQ
Quantity

17. Total Cost Including Purchasing CostQ p4 p2 p3
EOQ
Quantity

18. Total Cost Including Purchasing Cost
EOQ p4 p3 p2
Quantity

19. Example Demand for a product is 816 units / year ==> D = 816
Ordering cost is $12 / order ==> S = 12
Carrying cost is $4 / unit / year ==> H = 4
Price schedule is as follows
Quantity (Q) Price (P)
100 or more 16
What is the best quantity that we could order to minimize our total annual cost?

20. Example
(Q) (P)
100 or more 16
Q=70 is in the range. Therefore, the corresponding price is $18.
Obviously, we do not consider P=20, but what about P=17 or P=16?

21. Total Cost Including Purchasing Cost
EOQ
Quantity

22. Example Is Q = 70 and P = 18 better or Q = 80 and P = 17 or
TC = HQ/2 + SD/Q + PD
TC ( Q = 70 , P = 18) = 4(70)/2 +12(816)/ (816)
TC = 14968
TC ( Q = 80 , P = 17) = 4(80)/2 +12(816)/ (816)
TC = 14154
TC ( Q = 100 , P = 16) = 4(100)/2 +12(816)/ (816)
TC = 13354

23. Example Demand for a product is 25 tones / day and there are 200
working days / year. ==> D = 25(200) = 5000.
Ordering cost is $48 / order ==> S = 48
Carrying cost is $2 / unit / year ==> H = 2
Price schedule is as follows:
Quantity (Q) Price (P)
What is the best quantity that we could order to minimize our total annual cost?

24. Example
Q P
Q=490 is in the range. Therefore, the corresponding price is $9.
Obviously, we do not consider P=10 but what about P=8?

25. Example Is Q = 490 and P = 9 better or Q = 600 and P = 8
We should compare their TC
TC = HQ/2 + SD/Q + PD
TC ( Q = 490 , P = 9) = 2(490)/2 + 48(5000)/ (5000)
TC = =
TC ( Q = 600 , P = 8) = 2(600)/2 + 48(5000)/ (5000)
TC = 41000

26. Assignment 12b
Problem 2: A small manufacturing firm uses approximately 3400 pounds of chemical dye per year. Currently the firm purchases 300 pounds per order and pays $3 per pound. The supplier has just announced that orders of 1000 pounds and more will be filled at a price of $2 per pound. The ordering cost is $100 and inventory carrying cost is 51 cents per unit per year.
Determine the order size that will minimizes the total cost.
If the supplier offered a discount at 1500 pounds instead of 1000 pounds, what order size will minimize total cost?