1. September -2001 The Dupline Interface Options Dupline Interface Options

2. September -2001 Family Overview Dupline Interface Options Gateways to other Fieldbus Systems Plug & Play PLC Links (Master Modules) General-Purpose Links to PC/PLC Systems Controllers with Built-in Communication Port (Master Generator) General-purpose display interface (GTI 50)

3. September -2001 Fieldbus Gateways Dupline Interface Options Profibus-DP (Siemens...)(G3891 002X) DeviceNet (Allan Bradley)(G3891 0050) Modbus - RTU (G3496 0005 & G38900014) Interbus / CAN / LON (G3891 0050 Platform)

4. September -2001 Plug & Play PLC Links Dupline Interface Options Lucky Goldstar - K-series(G3496 0001) Lucky Goldstar - K-series(G3496 0001) Ge Fanuc - Micro 90-30 series(G3496 0002) Ge Fanuc - Micro 90-30 series(G3496 0002) Mitsubishi - FX & AnS series(G3496 0003) Mitsubishi - FX & AnS series(G3496 0003) OMRON - CPM, CQM & C200(G3496 0004) OMRON - CPM, CQM & C200(G3496 0004) Allan Bradley - SLC5-0x & Micrologix(G3496 0006) Allan Bradley - SLC5-0x & Micrologix(G3496 0006) Group Schneider - Telemechanique & Modicon(G3496 0007) Group Schneider - Telemechanique & Modicon(G3496 0007) Koyo – DL05 Micro Family(G3496 0008) Koyo – DL05 Micro Family(G3496 0008) Matsushita – FP series(G3496 0009) Matsushita – FP series(G3496 0009) Siemens Simatic – S7-200 Family(G3496 0010) Siemens Simatic – S7-200 Family(G3496 0010) Toshiba(G3496 0011) Toshiba(G3496 0011)

5. September -2001 General-Purpose Links to PC / PLC Dupline Interface Options Master Module (Optolink protocol)(G3496 0000) Master Module (Optolink protocol)(G3496 0000) Optolink Interface(G3491 0090) Optolink Interface(G3491 0090) Modem Interface(D9091 0210) Modem Interface(D9091 0210) Note: A driver for one of the Dupline proprietary protocols must be implemented in the actual Master unit based on the specifications and guidelines avaliable from Carlo Gavazzi.

6. September -2001 Controller Units Dupline Interface Options Master Generator (Modbus-RTU)(G3890 0014) Master Generator (Modbus-RTU)(G3890 0014) Monitoring Controller (G3890 0034) Monitoring Controller (G3890 0034) Note: If the G3890 0014 Generator is used in a multi-drop application, an external RS-232 to RS-485 converter must be used. The G3890 0034 Controller unit uses a dedicated communication protocol which must be adapted by the actual Master.

7. September -2001 General-Purpose Display Interface Dupline Interface Options The compact GTI 50 Modbus – RTU Interface unit can be used with : Carlo Gavazzi Textdisplay (GTD 50) Carlo Gavazzi Textdisplay (GTD 50) ESA Touchscreen(GTS 565) ESA Touchscreen(GTS 565) Proface Touchscreen(GTS377S) Proface Touchscreen(GTS377S) Note: The GTI 50 unit has no Channel Generator (Passive) and offers a RS-485 communication port with Modbus protocol. (Id. Number can be set to 1 & 2).

8. September -2001 Interface overview Dupline Interface Options

9. September -2001 Remarks to the Table Dupline Interface Options The mentioned number of I/O´s is the maximum of each type without regard for the fact that Digital and Analog values share the same Dupline addresses and can cause a conflict. This should be taken into consideration when a system is designed.

10. September -2001 Interfacing Dupline to a PLC Through RS232/RS485 Dupline Interface Options Dupline Network Dupline Serial/ Interface PLC RS-232 / RS-485

11. September -2001 Interface to a PLC via Dupline Profibus-DP Gateway Dupline Interface Options PLC Profibus-DP Dupline Network 2 Dupline Network n Dupline Network 1 Dupline ® Profibus-DP Gateway 2 Dupline ® Profibus-DP Gateway 1 Dupline ® Profibus-DP Gateway n 1 2 n

12. September -2001 Interfacing Dupline Networks to a PC Dupline Interface Options Dupline ® Profibus-DP Gateway 2 Dupline ® network 2 Dupline ® network n Dupline ® network 1 Profibus-DP Dupline ® Profibus-DP Gateway 1 Dupline ® Profibus-DP Gateway n 1 2 n PC PC Card