1. LAB TOOLS Identification and Function

2. POUNDING TOOLS HAMMERS- TO USE TO STRIKE AN OBJECT AND WILL LEAVE SURFACE MARRING AND DENTS ON THE OBJECT HAMMERS- TO USE TO STRIKE AN OBJECT AND WILL LEAVE SURFACE MARRING AND DENTS ON THE OBJECT MALLETS-TO STRIKE AN OBJECT WHERE THE OBJECT SURFACE IN HARDER THAN THE MALLET’S FACES AND WILL LEAVE LITTLE MARRING AND DENTS MALLETS-TO STRIKE AN OBJECT WHERE THE OBJECT SURFACE IN HARDER THAN THE MALLET’S FACES AND WILL LEAVE LITTLE MARRING AND DENTS

3. BALL- PEEN HAMMER HAMMERS

4. MALLETS: Soft Tip

5. Rubber Mallet

6. PUNCHES AND CHISELS PUNCHES- USED WITH THE BALL-PEEN HAMMER TO MOVE OR DEFORM AN OBJECT PUNCHES- USED WITH THE BALL-PEEN HAMMER TO MOVE OR DEFORM AN OBJECT CHISELS- USED WITH THE BALL-PEEN HAMMER TO MAINLY CUT OBJECTS AND REMOVE MATERIAL CHISELS- USED WITH THE BALL-PEEN HAMMER TO MAINLY CUT OBJECTS AND REMOVE MATERIAL

7. Punches: Center Punch

8. Pin Punch

9. Chisels: Cold Chisel

10. PLIERS WHAT IS A GOOD DEFINITION OF THE TOOL “PLIERS”? WHAT IS A GOOD DEFINITION OF THE TOOL “PLIERS”? ANSWER: A TOOL TO INCREASE THE TORQUE OF THE HAND. ANSWER: A TOOL TO INCREASE THE TORQUE OF THE HAND.

11. Universal Pliers

12. Slip-Joint Pliers

13. NEEDLE NOSE PLIERS CUTTERS

14. Dykes

15. VISE-GRIPS RELEASE CLAMP ADJUSTMENT

16. Snap-ring Pliers

17. Side Cutters (Tin-Snips)

18. Test Your Knowledge

19. WRENCHES AND SOCKETS WRENCHES- COME IN SAE(US FRACRIONAL) AND METRIC SIZES, MOST ARE USED MANUALLY BY HAND WRENCHES- COME IN SAE(US FRACRIONAL) AND METRIC SIZES, MOST ARE USED MANUALLY BY HAND SOCKETS- COME IN SAE(US FRACTIONAL) SIZES AND ISO METRIC SIZES AND ARE GENERALLY USED WITH SOME SORT OF HANDLE OR AIR DRIVE SOCKETS- COME IN SAE(US FRACTIONAL) SIZES AND ISO METRIC SIZES AND ARE GENERALLY USED WITH SOME SORT OF HANDLE OR AIR DRIVE

20. Combination Wrench

21. Open End Wrench

22. Wrenches: Box-End Wrench

23. Allen Wrench (Hex Key)

24. SOCKET SETS Common Socket Set Square Dive Sizes: Common Socket Set Square Dive Sizes: 1” 1” ¾” ¾” ½” ½” 3/8” 3/8” ¼” ¼”

25. SHALLOW AND DEEP SOCKETS SHALLOW DEEP

26. STANDARD 6 AND 12 POINT SOCKETS

27. IMPACT SOCKET (Black Oxide)

28. Standard Ratchet Handle and Socket Use a Breaker Bar for highly-torqued fasteners Deep and Shallow sockets Chrome/Silver not for impact QUICK RELEASE

29. Extensions

30. Beam Torque Wrench

31. Click Torque Wrench

32. SCREWDIVERS FLAT-TIPPED FLAT-TIPPED PHILLIPS PHILLIPS TORK (STAR) TORK (STAR) INTERNAL HEX (ALLEN) INTERNAL HEX (ALLEN)

33. Flat –Tip Screwdriver

34. Screwdrivers: Phillips (Cross-tip)

35. TORX, TORQ or Star

36. Offset

37. THREAD CUTTING TOOLS TAPS FOR INTERNAL THREADS TAPS FOR INTERNAL THREADS DIES FOR EXTERNAL THREADS DIES FOR EXTERNAL THREADS

38. Thread Tap (Internal Threads)

39. Threading Die (Outside threads)

40. CUTTING AND SMOOTHING SAWS SAWS BLADES BLADES FILES FILES FILE CARDS FILE CARDS

41. Hacksaw

42. Double-cut File

43. Pry Bar

44. A FEW MEASURING TOOLS SCALES (RULES) SCALES (RULES) FEELER GAGES FEELER GAGES MICROMETERS MICROMETERS DIAL CALIPERS DIAL CALIPERS

45. Measuring Tools Measuring Tools

46. Feeler Gauge (Thickness Gauge)

47. Micrometer Inch or Metric to.0001 of an inch 0” to 1”, 1” to 2” and so on Outside mike pictured, outside mikes also

48. Dial Caliper Inch or Metric to.001 of an inch Measures inside and outside and depth

49. MORE TOOLS IN “TOOLS PART 2” Super Ending!