Presentation is loading. Please wait.

Presentation is loading. Please wait.

HOW TO USE SET-UP YOUR BLUMAGIX POWER BANK WITH ROUTER.

Similar presentations


Presentation on theme: "HOW TO USE SET-UP YOUR BLUMAGIX POWER BANK WITH ROUTER."— Presentation transcript:

1 HOW TO USE SET-UP YOUR BLUMAGIX POWER BANK WITH ROUTER

2 STEP 1 Turn on device, and set switch to “R”, for “Router” STEP 2 From your device, search under available connections and connect to EDM-WIFI

3 STEP 3 Open browser and enter 192.168.169.1 as URL address; select “System Settings” Select

4 Select “Work Mode” from the left panel. Set-up device for use as: - Router OR - 3G Router -> where internet connection is available with the use of a mobile broadband dongle Hit “Apply”

5 STEP 4 Ignore screen as shown below.

6 STEP 5 Enter 192.168.169.1 as URL address; select 3G icon Select

7 STEP 6 Select Manual configuration and select the ISP being used (Singtel, M1, Starhub) Select

8 STEP 7 Your Internet Service Provider (ISP) should appear in the APN. If ISP is not listed, key in the correct APN and DialNum given by ISP; press “Apply” Please allow 15-30secs for the router to re-initialise for connection. Edit Select after editing

9 STEP 8 When connected, the “System Status” page will reflect the IP address IP Address will be shown if connected


Download ppt "HOW TO USE SET-UP YOUR BLUMAGIX POWER BANK WITH ROUTER."

Similar presentations


Ads by Google