Presentation is loading. Please wait.

Presentation is loading. Please wait.

RF Cavity / Coupling Coil Module

Published byLiliana Harvey Modified over 9 years ago

Similar presentations

Presentation on theme: "RF Cavity / Coupling Coil Module"— Presentation transcript:

1 RF Cavity / Coupling Coil Module
Project Plan and Progress March 18, 2008 Steve Virostek Lawrence Berkeley National Lab

2 Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008
Summary A bottoms-up, WBS based plan (including a cost estimate and schedule) has been developed for completion of two RFCC modules A task list of ~300 items includes: engineering, design, reviews, procurement, fabrication, assembly, testing and shipping Current plan calls for funding and/or effort from the following institutions: Lawrence Berkeley Lab, ICST/HIT at Harbin, University of Mississippi, UC Riverside and Oxford Physics MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

3 Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008
Funding and Schedule The early finish schedule and no contingency cost estimate results in delivery of the completed RFCC modules near the end of FY09 Currently projected funding is sufficient to complete the project on the two year schedule Contingency and float can be provided by the use of FY10 funds and by stretching the schedule into FY10, if necessary RF cavity design and fab is on the critical path MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

4 Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008
Preliminary Plan The detailed design of the cavities and associated subcomponents will be based on the prototype cavity design developed at LBNL and J-Lab The MuCool and MICE Coupling Coils have been designed and will be fabricated & tested at ICST LBNL engineering will coordinate the fabrication of the cavities using a combination of in-house shops, collaborator shops (U. Miss.) and outside resources (spinning, e-beam welding, etc.) MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

5 Preliminary Plan (cont’d)
Subcomponent procurements (Be windows, RF windows and couplers, vacuum system, cryocoolers, power supplies) will be specified by LBNL & purchased w/funds from various sources Coupling coils, cavities and other components will likely be integrated into RFCC modules at LBNL using in-house technical resources Module testing will take place at LBNL prior to shipping to the MICE hall at RAL MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

6 Preliminary RFCC Module Schedule
MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

7 Engineering, Design & Technical Resources
An additional FTE engineer (Alan DeMello) at LBNL has been assigned to work on the module along with M. Green & S. Virostek ICST has the engineering and technical resources needed to complete the design and fabrication of the coupling coils (with some LBNL oversight) Technical resources, machine shops & assembly facilities are currently available at LBNL MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

8 Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008
Funding Plan Projected available funding through LBNL (FY07-FY09), U. Miss. and UC Riverside is sufficient to cover the estimated project costs ICST is funding the manpower & a portion of the raw material costs for completion of the coupling coils (bulk of material is coming from the US) The current cost estimates do not contain contingency - additional project $ to be available in FY10 should provide adequate contingency MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

9 Updated RFCC Module 3D CAD Model
Cavity suspension Automatic tuners 201 MHz RF cavity MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

10 Cavity End View with Tuners and Struts
Six tuners per cavity provide individual frequency adjustment Tuning automatically achieved through a feedback loop Six struts per cavity provide a kinematic mounting system Struts fix cavity position without over-constraint MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

11 Cavity Tuner Design Features
Tuners are spaced evenly every 60º around cavity Layout is offset by 15º from vertical to avoid conflict with cavity ports Tuners touch cavity and apply loads only at the stiffener rings Tuners operate in “push” mode only (i.e. squeezing) MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

12 Four Cavity Layout in Vacuum Vessel
Each cavity contains a dedicated set of suspension struts No contact between pairs of close packed cavities Struts designed to axially fix outside end of cavity pairs Tuning deflections increase cavity gap MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

13 Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008
Coupling Coil Update An MOU between LBNL and ICST/HIT at Harbin for the Coupling Coil Project is in place The MOU includes an addendum with milestones and funding information as well as a technical agreement containing the magnet specifications 260 km of superconductor ordered (137 km rec’d) Additional procurements are under way – first shipment of materials has been received at ICST ICST has completed the magnet final design and is ready to wind a pair of test coils MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

14 Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008
Coupling Coil Design MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

15 Coupling Coil Components
Vacuum chamber Cryocoolers He condenser Cooling circuit He collection box Cover plate Al coil mandrel Coil Heat shields Cold mass supports LHe distribution container Al banding G-10 insulation MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

16 Coupling Coil Analyses
MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

17 Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008
Coil Winding Tooling MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

18 Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008
Summary A detailed plan has been developed for the design and fabrication of two RFCC modules Both the funding and manpower required to complete the effort are available (new engineer on the LBNL) ICST has completed the Coupling Coil design and is prepared to start winding a pair of test coils Material orders and shipment to ICST of Coupling Coil components are ongoing Design & analysis of the MICE 201 MHz cavity is under way A revised beryllium window design has been developed, and quotes have been obtained from the vendor MICE RF and Coupling Coil Module – Summary of the Design and Fabrication Plan Steve Virostek - Lawrence Berkeley National Lab - March 18, 2008

Download ppt "RF Cavity / Coupling Coil Module"

Similar presentations

MICE RF Cavities and RFCC Module Update Derun Li Lawrence Berkeley National Laboratory MICE RF Workshop Daresbury Laboratory, UK April 17, 2012 April 17,

MICE RF Cavities and RFCC Module Update Derun Li Lawrence Berkeley National Laboratory MICE RF Workshop Daresbury Laboratory, UK April 17, 2012 April 17,
RF Cavity Module G. Gosling Dept. of Mechanical Engineering Imperial College London.

RF Cavity Module G. Gosling Dept. of Mechanical Engineering Imperial College London.
MICE RF and Coupling Coil Module Outstanding Issues Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 26, 2004.

MICE RF and Coupling Coil Module Outstanding Issues Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 26, 2004.
MICE RF Cavity Design and Fabrication Update Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 27, 2004.

MICE RF Cavity Design and Fabrication Update Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 27, 2004.
Plans for 201-MHz Cavities Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory November 18, 2010.

Plans for 201-MHz Cavities Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory November 18, 2010.
RF Measurement Plan Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory January 20, 2011 MICE Video Conference Meeting.

RF Measurement Plan Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory January 20, 2011 MICE Video Conference Meeting.
UPDATE of RFCC MOUDLE Derun Li, Steve Gourlay Lawrence Berkeley National Laboratory MICE MICO Meeting December 21, 2011.

UPDATE of RFCC MOUDLE Derun Li, Steve Gourlay Lawrence Berkeley National Laboratory MICE MICO Meeting December 21, 2011.
Integration of Cavities and Coupling Coil Modules Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting March 28 – April 1, 2004.

Integration of Cavities and Coupling Coil Modules Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting March 28 – April 1, 2004.
Trip Report on the visit to ICST of HIT, Harbin, China Derun Li Mike Green Steve Virostek Mike Zisman Lawrence Berkeley National Laboratory (from December.

Trip Report on the visit to ICST of HIT, Harbin, China Derun Li Mike Green Steve Virostek Mike Zisman Lawrence Berkeley National Laboratory (from December.
-1- Wang, Li The 23rd MICE Collaboration Meeting 2009-01-13 to 17 HIT/CHINA WANG, Li 2009-01-15 Institute of Cryogenics and Superconductivity Technology.

-1- Wang, Li The 23rd MICE Collaboration Meeting to 17 HIT/CHINA WANG, Li Institute of Cryogenics and Superconductivity Technology.
Status of the 201 MHz Cavity and Coupling Coil Module Steve Virostek Lawrence Berkeley National Laboratory MICE Video Conference March 10, 2004.

Status of the 201 MHz Cavity and Coupling Coil Module Steve Virostek Lawrence Berkeley National Laboratory MICE Video Conference March 10, 2004.
Installation Issues Steve Virostek Lawrence Berkeley National Lab MICE CM23 at ICST, Harbin January 13, 2009.

Installation Issues Steve Virostek Lawrence Berkeley National Lab MICE CM23 at ICST, Harbin January 13, 2009.
Cooling Channel Summary Michael S. Zisman Center for Beam Physics Accelerator & Fusion Research Division Lawrence Berkeley National Laboratory MICE Collaboration.

Cooling Channel Summary Michael S. Zisman Center for Beam Physics Accelerator & Fusion Research Division Lawrence Berkeley National Laboratory MICE Collaboration.
Tracker Solenoid Module Design Update Steve VirostekStephanie Yang Mike GreenWing Lau Lawrence Berkeley National LabOxford Physics MICE Collaboration Meeting.

Tracker Solenoid Module Design Update Steve VirostekStephanie Yang Mike GreenWing Lau Lawrence Berkeley National LabOxford Physics MICE Collaboration Meeting.
Progress on the MICE 201 MHz Cavity Design Steve Virostek Lawrence Berkeley National Lab RF Working Group Fermilab August 22, 2007  automatic.

Progress on the MICE 201 MHz Cavity Design Steve Virostek Lawrence Berkeley National Lab RF Working Group Fermilab August 22, 2007  automatic.
Spectrometer Solenoid Fabrication Update Steve Virostek Lawrence Berkeley National Lab MICE CM23 at ICST, Harbin January 14, 2009.

Spectrometer Solenoid Fabrication Update Steve Virostek Lawrence Berkeley National Lab MICE CM23 at ICST, Harbin January 14, 2009.
9 June 2006MICE CM-15 Fermilab1 Progress on the MICE Cooling Channel and Tracker Magnets since CM-14 Michael A. Green Lawrence Berkeley Laboratory.

9 June 2006MICE CM-15 Fermilab1 Progress on the MICE Cooling Channel and Tracker Magnets since CM-14 Michael A. Green Lawrence Berkeley Laboratory.
Update on Be Wall Cavity Steve Virostek Lawrence Berkeley National Lab MTA RF Workshop November 15, 2010.

Update on Be Wall Cavity Steve Virostek Lawrence Berkeley National Lab MTA RF Workshop November 15, 2010.
MICE RFCC Module Update Allan DeMello Lawrence Berkeley National Lab MICE CM26 at Riverside California March 26, 2010.

MICE RFCC Module Update Allan DeMello Lawrence Berkeley National Lab MICE CM26 at Riverside California March 26, 2010.
Status of 201 MHz Prototype and RFCC Module Derun Li, S. Virostek, M. Zisman Center for Beam Physics Lawrence Berkeley National Laboratory In collaboration.

Status of 201 MHz Prototype and RFCC Module Derun Li, S. Virostek, M. Zisman Center for Beam Physics Lawrence Berkeley National Laboratory In collaboration.

Similar presentations

Ads by Google