1. dMT – SPC Metallschutzprodukte auf Trockenbasis dMT-SPC dry protective coatings contain a mixture of special components (no graphite) which create and continually maintain an optimal coefficient of friction between two surfaces dMT – SPC Surface Protective Coatings

2. dMT - Surface Protective Coatings System for Support Trunnions and Rings on Kilns, Rotating Furnaces, Dryers, Mills, etc. Rotating Drum Equipment This picture shows a example of a SPC DRR-5.0L Block System with 5 spring-loaded, steel applicators. The number of required blocks / applicators or size of the unit depends upon the width of the trunnions or rings to be coated. Type TSB-085-DRR Blocks are used on supporting trunnions without a drive function. SPC blocks are to be inserted from the rear side of each applicator. Example: Block System with 5 Steel Applicators

3. SPC-TRB-100 blocks with steel applicators mounted against tyre surface SPC-Coatings for trunnions and tyres of rotating furnaces, kilns, dryers (noticable „mirror image“ on surface) Rotating Drum Equipment

4. SPC-Coatings for trunnions and tyres of rotating dryer

5. SPC-Coatings for trunnions and tyres on asphalt dryer with chain drive June 2002 – installation of 2 sets of SPC DRR-T-2.0 kits each with 2 TRB-100-DRR blocks to reduce wear on rollers and tyre. Maintenance-free operation of kits. Rotating Drum Equipment

6. SPC-TRB-100 low c.o.f. block with stainless-steel applicator type KR-RB-160 Rotating incinerator for hazardous waste at a chemicals production plant SPC-Coatings for trunnions and tyres, as well as thrust rollers, on rotating furnace Rotating Drum Equipment DRR-T-4.0 low c.o.f. block-Kit