1. www.lginnotek.com Datasheet is subject to change without notice. Outdoor Revised 21 January 2013 (REV. 4.0) ParameterMinTyp.MaxUnitRemark Input Voltage 108-305VAC Input Current -1.0A Input Frequency 47-63Hz Power Factor 0.9--PF Inrush Current --TBDApk Based on IEC60555 PISN-C100A 100W Dimmable Power Features ▶ Suitable for LED Street Outdoor Application ▶ Universal AC input / Full Range (AC108V ~ AC305V) ▶ 0 -10 Dimming can be selected ▶ Constant and Adjustable Current / Voltage Control ▶ High Efficiency (Up to 84%) ▶ High PF (> 0.9) and Low THD (< 20%) ▶ Protection : OVP, OCP, SCP and OTP ▶ Class 2 Output Safety Certifications Approved Input Specifications Critical Specifications Output Specifications ParameterMinTyp.MaxUnitRemark Output Voltage 152124V Output Current 4.1A Output Dimming Current Range 10-100%0-10 Dimming Output Current Tolerance -5-+5% Output Ripple Current --10% Start-up Time --500ms 24V / 4.1A / 98.4W 1 Input Voltage Output Voltage Output Current Output Power EfficiencyTHD Power Factor 108 - 305VAC 24V4.1A98.4WUp to 84%< 20% > 0.9 ▶ Mechanical Outline (Metal Case) - 228 x 59 x 40mm ※ Mass Production : May. 2013 ※ Sample Availability : Feb. 2013

2. www.lginnotek.com Datasheet is subject to change without notice. Outdoor Revised 21 January 2013 (REV. 4.0) 2 ParameterMinTyp.MaxUnitRemark Output Over Voltage Protection 27V Auto Recovery (SELV) Output Short Circuit Protection -A Auto Recovery Input Under Voltage Protection -VAC Not Applied Protection Functions Reliability Specifications ParameterMinTyp.MaxUnitRemark Life Time 100--kHr @ tc=65 ℃ 50--kHr @ tc=75 ℃ MTBF ---kHr Environmental Specifications ParameterMinTyp.MaxUnitRemark Operating Temperature -40-55 ℃ Ambient temp. Case Temperature 85 ℃ Case temp. Storage Temperature -40-90 ℃ Ambient temp. Humidity 10-90% Relative humidity for operation TBD- % Relative humidity for storage Standards ParameterConditionRemark Safety Standards -UL 8750, UL 1310, C22.2 No.223 ( These will certified by modified model until October 2012 ) -SELV Output - Class 2 EMI / RFI Standards - FCC part 15, Class A verification

3. www.lginnotek.com Datasheet is subject to change without notice. Outdoor Revised 21 January 2013 (REV. 4.0) Mechanical Outline 1. Case Dimension 2. Connector Wiring Diagram LED Driver Output LED Array 0-10V Dimming 0-10V Dimming Input BLACK (LINE) WHITE (NEUTRAL ) BLUE (- VLED) RED (+VLED) VIOLET (+DIM) GRAY (-DIM)  Input Cable(18AWG) - WHITE = NEUTRAL - BLACK = LINE  Output Cable(18AWG) - RED = +VLED - BLUE = -VLED - VIOLET = +DIM - GRAY = -DIM