1. Fuel Cells Prof. Park UTI-111 Essex County College

2. What Is A Fuel Cell? In principle, a fuel cell operates like a battery. Unlike a battery, a fuel cell does not run down or require recharging. It will produce energy in the form of electricity and heat as long as fuel is supplied. A fuel cell consists of two electrodes sandwiched around an electrolyte. Oxygen passes over one electrode and hydrogen over the other, generating electricity, water and heat.

3. What Is A Fuel Cell?

4. Hydrogen fuel is fed into the "anode" of the fuel cell. Oxygen (or air) enters the fuel cell through the cathode. Encouraged by a catalyst, the hydrogen atom splits into a proton and an electron, which take different paths to the cathode. The proton passes through the electrolyte. The electrons create a separate current that can be utilized before they return to the cathode, to be reunited with the hydrogen and oxygen in a molecule of water.

5. What Is A Fuel Cell? A fuel cell system which includes a "fuel reformer" can utilize the hydrogen from any hydrocarbon fuel - from natural gas to methanol, and even gasoline. Since the fuel cell relies on chemistry and not combustion, emissions from this type of a system would still be much smaller than emissions from the cleanest fuel combustion processes.

6. Types of Fuel Cells 1.Phosphoric AcidPhosphoric Acid 2.Proton Exchange MembraneProton Exchange Membrane 3.Molten CarbonateMolten Carbonate 4.Solid OxideSolid Oxide 5.AlkalineAlkaline 6.Direct MethanolDirect Methanol 7.RegenerativeRegenerative 8.Zinc AirZinc Air 9.Protonic CeramicProtonic Ceramic 10.Microbial Fuel CellMicrobial Fuel Cell

7. Phosphoric Acid fuel cell (PAFC) Phosphoric acid fuel cells are commercially available today. Hundreds of fuel cell systems have been installed in 19 nations - in hospitals, nursing homes, hotels, office buildings, schools, utility power plants, landfills and waste water treatment plants. PAFCs generate electricity at more than 40% efficiency - and nearly 85% of the steam this fuel cell produces is used for cogeneration - this compares to about 35% for the utility power grid in the United States. Phosphoric acid fuel cells use liquid phosphoric acid as the electrolyte and operate at about 450°F. One of the main advantages to this type of fuel cell, besides the nearly 85% cogeneration efficiency, is that it can use impure hydrogen as fuel. PAFCs can tolerate a CO concentration of about 1.5 percent, which broadens the choice of fuels they can use. If gasoline is used, the sulfur must be removed.

8. Proton Exchange Membrane fuel cell (PEM) These fuel cells operate at relatively low temperatures (about 175°F), have high power density, can vary their output quickly to meet shifts in power demand, and are suited for applications, such as in automobiles, where quick startup is required. According to the U.S. Department of Energy (DOE), "they are the primary candidates for light-duty vehicles, for buildings, and potentially for much smaller applications such as replacements for rechargeable batteries." This type of fuel cell is sensitive to fuel impurities. Cell outputs generally range from 50 watts to 75 kW.

9. Molten Carbonate fuel cell (MCFC) Molten carbonate fuel cells use an electrolyte composed of a molten carbonate salt mixture suspended in a porous, chemically inert matrix, and operate at high temperatures - approximatelly 1,200ºF. They require carbon dioxide and oxygen to be delivered to the cathode. To date, MCFCs have been operated on hydrogen, carbon monoxide, natural gas, propane, landfill gas, marine diesel, and simulated coal gasification products. 10 kW to 2 MW MCFCs have been tested on a variety of fuels and are primarily targeted to electric utility applications.

10. Solid Oxide fuel cell (SOFC) Solid oxide fuel cells use a hard, non-porous ceramic compound as the electrolyte, and operate at very high temperatures - around 1800°F. One type of SOFC uses an array of meter-long tubes, and other variations include a compressed disc that resembles the top of a soup can. Tubular SOFC designs are closer to commercialization and are being produced by several companies around the world. SOFCs are suitable for stationary applications as well as for auxiliary power units (APUs) used in vehicles to power electronics.

11. Alkaline fuel cell (AFC) Long used by NASA on space missions, alkaline fuel cells can achieve power generating efficiencies of up to 70 percent. They were used on the Apollo spacecraft to provide both electricity and drinking water. Alkaline fuel cells use potassium hydroxide as the electrolyte and operate at 160°F. However, they are very susceptible to carbon contamination, so require pure hydrogen and oxygen.

12. Direct Methanol fuel cell (DMFC) These cells are similar to the PEM cells in that they both use a polymer membrane as the electrolyte. However, in the DMFC, the anode catalyst itself draws the hydrogen from the liquid methanol, eliminating the need for a fuel reformer. Efficiencies of about 40% are expected with this type of fuel cell, which would typically operate at a temperature between 120-190°F. This is a relatively low range, making this fuel cell attractive for tiny to mid-sized applications, to power cellular phones and laptops. Higher efficiencies are achieved at higher temperatures. Companies are also working on DMFC prototypes to be used by the military for powering electronic equipment in the field.

13. Regenerative fuel cell Regenerative fuel cells are attractive as a closed-loop form of power generation. Water is separated into hydrogen and oxygen by a solar-powered electrolyzer. The hydrogen and oxygen are fed into the fuel cell which generates electricity, heat and water. The water is then recirculated back to the solar- powered electrolyzer and the process begins again. These types of fuel cells are currently being researched by NASA and others worldwide.

14. Zinc Air fuel cell (ZAFC) In a typical zinc/air fuel cell, there is a gas diffusion electrode (GDE), a zinc anode separated by electrolyte, and some form of mechanical separators. The GDE is a permeable membrane that allows atmospheric oxygen to pass through. After the oxygen has converted into hydroxyl ions and water, the hydroxyl ions will travel through an electrolyte, and reaches the zinc anode. Here, it reacts with the zinc, and forms zinc oxide. This process creates an electrical potential; when a set of ZAFC cells are connected, the combined electrical potential of these cells can be used as a source of electric power. This electrochemical process is very similar to that of a PEM fuel cell, but the refueling is very different and shares characteristics with batteries.

15. Zinc Air fuel cell (ZAFC) ZAFCs contain a zinc "fuel tank" and a zinc refrigerator that automatically and silently regenerates the fuel. In this closed-loop system, electricity is created as zinc and oxygen are mixed in the presence of an electrolyte (like a PEMFC), creating zinc oxide. Once fuel is used up, the system is connected to the grid and the process is reversed, leaving once again pure zinc fuel pellets. The key is that this reversing process takes only about 5 minutes to complete, so the battery recharging time hang up is not an issue. The chief advantage zinc-air technology has over other battery technologies is its high specific energy, which is a key factor that determines the running duration of a battery relative to its weight.

16. Protonic Ceramic fuel cell (PCFC) This new type of fuel cell is based on a ceramic electrolyte material that exhibits high protonic conductivity at elevated temperatures. PCFCs share the thermal and kinetic advantages of high temperature operation at 700 degrees Celsius with molten carbonate and solid oxide fuel cells, while exhibiting all of the intrinsic benefits of proton conduction in PEM and phosphoric acid fuel cells. The high operating temperature is necessary to achieve very high electrical fuel efficiency with hydrocarbon fuels. PCFCs can operate at high temperatures and electrochemically oxidize fossil fuels directly to the anode. This eliminates the intermediate step of producing hydrogen through the costly reforming process.

17. Protonic Ceramic fuel cell (PCFC) Gaseous molecules of the hydrocarbon fuel are absorbed on the surface of the anode in the presence of water vapor, and hydrogen atoms are efficiently stripped off to be absorbed into the electrolyte, with carbon dioxide as the primary reaction product. Additionally, PCFCs have a solid electrolyte so the membrane cannot dry out as with PEM fuel cells, or liquid can't leak out as with PAFCs.

18. Microbial fuel cell (MFC) Microbial fuel cells use the catalytic reaction of microorganisms such as bacteria to convert virtually any organic material into fuel. Some common compounds include glucose, acetate, and wastewater. Enclosed in oxygen-free anodes, the organic compounds are consumed (oxidized) by the bacteria or other microbes. As part of the digestive process, electrons are pulled from the compound and conducted into a circuit with the help of an inorganic mediator. MFCs operate well in mild conditions relative to other types of fuel cells, such as 20-40 degrees Celsius, and could be capable of producing over 50% efficiency. These cells are suitable for small scale applications such as potential medical devices fueled by glucose in the blood, or larger such as water treatment plants or breweries producing organic waste that could then be used to fuel the MFCs.

19. Applications of Fuel Cells Stationary: Hotel, College, House –Telecommunications –Landfills/Wastewater Treatment Plants/Breweries Transportation –Cars, Buses, and Scooters –Forklifts/Materials Handling –Auxiliary Power Units (APUs) –Trains, Planes, and Boats Portable Power: campsite, military Micro Power: Consumer Electronics

20. Applications of Fuel Cells There are many uses for fuel cells — right now, all of the major automakers are working to commercialize a fuel cell car. Fuel cells are powering buses, boats, trains, planes, scooters, forklifts, even bicycles. There are fuel cell-powered vending machines, vacuum cleaners and highway road signs. Miniature fuel cells for cellular phones, laptop computers and portable electronics are on their way to market. Hospitals, credit card centers, police stations, and banks are all using fuel cells to provide power to their facilities. Wastewater treatment plants and landfills are using fuel cells to convert the methane gas they produce into electricity. Telecommunications companies are installing fuel cells at cell phone, radio and 911 towers. The possibilities are endless.

21. Benefits of Fuel Cells Low to Zero Emissions High Efficiency High Reliability/High Quality Power Fuel Flexibility Security Modularity/Scalability/Flexible Siting Lightweight/Long-lasting Battery Alternative

22. Fuel Cell NameElectrolyteQualified Power (W)Power Working Temperature (°C) Temperature Electrical efficiency Metal hydride fuel cellAqueousAqueous alkaline solution (e.g.potassium hydroxide)alkalinepotassium hydroxide above -20 (50% P peak @ 0°C) Electro-galvanic fuel cellAqueous alkaline solution (e.g., potassium hydroxide)under 40 Direct formic acid fuel cellDirect formic acid fuel cell (DFAFC)Polymer membrane (ionomer)to 50 Wunder 40 Zinc-air batteryAqueous alkaline solution (e.g., potassium hydroxide)under 40 Microbial fuel cellPolymer membrane or humic acidhumic acidunder 40 Upflow microbial fuel cell (UMFC)under 40 Regenerative fuel cellPolymer membrane (ionomer)ionomerunder 50 Direct borohydride fuel cellAqueous alkaline solution (e.g., sodium hydroxide)sodium hydroxide70 Alkaline fuel cellAqueous alkaline solution (e.g., potassium hydroxide)10 kW to 100 kWunder 80 Cell: 60–70% System: 62% Direct methanol fuel cellPolymer membrane (ionomer)100 mW to 1 kW90–120 Cell: 20–30% System: 10–20% Reformed methanol fuel cellPolymer membrane (ionomer)5 W to 100 kW (Reformer)250 –300 (PBI)125–200 Cell: 50–60% System: 25–40% Direct-ethanol fuel cellPolymer membrane (ionomer)up to 140 mW/cm² above 25 ? 90–120 Proton exchange membrane fuel cell Polymer membrane (ionomer) (e.g., Nafion or Polybenzimidazole fiber)Nafion Polybenzimidazole fiber 100 W to 500 kW (Nafion)50– 120 (PBI)125–220 Cell: 50–70% System: 30–50%

23. Fuel Cell NameElectrolyteQualified Power (W)Power Working Temperature (°C) Temperature Electrical efficiency RFC - Redox Liquid electrolytes with redox shuttle & polymer membrane (Ionomer)redox 1 kW to 10 MW Phosphoric acid fuel cellMolten phosphoric acid (H 3 PO 4 )phosphoric acidup to 10 MW150-200 Cell: 55% System: 40% Co-Gen: 90% Molten carbonate fuel cell Molten alkaline carbonate (e.g., sodium bicarbonate NaHCO 3 )carbonatesodium bicarbonate 100 MW600-650 Cell: 55% System: 47% Tubular solid oxide fuel cellTubular solid oxide fuel cell (TSOFC) O 2- -conducting ceramic oxide (e.g., zirconium dioxide, ZrO 2 )oxidezirconium dioxide up to 100 MW850-1100 Cell: 60–65% System: 55–60% Protonic ceramic fuel cellH + -conducting ceramic oxide700 Direct carbon fuel cellSeveral different700-850 Cell: 80% System: 70% Planar Solid oxide fuel cellSolid oxide fuel cell O 2- -conducting ceramic oxide (e.g., zirconium dioxide, ZrO 2 Lanthanum Nickel Oxide La 2 XO 4,X= Ni,Co, Cu.)oxidezirconium dioxide up to 100 MW850-1100 Cell: 60–65% System: 55–60% Enzymatic Biofuel Cells Any that will not denature the enzyme (usually aqueous buffer).buffer under 40