Download presentation
Presentation is loading. Please wait.
Published byLetitia Booker Modified over 9 years ago
1
Scale Model Automated Road Vehicle Advanced Transit Association Annual Technical Meeting January 10, 2010 College Park, Maryland Robert Johnson R. E. Johnson Consulting Rockville, Maryland www.REJConsult.com
2
www.REJConsult.com2 Examples of Small Automated Road Vehicles CyberCab: proposed by 2getthere which developed the first public automated road vehicle (ParkShuttle) ULTra: scheduled to begin service in 2010 at Heathrow airport, London
3
www.REJConsult.com3 Alternative Interior Layouts and Service Concepts Typical PRT –Two fixed seats –Two fold-down seats –Could have pure PRT or some sharing “Automated Microbus” –Four fixed seats –Two fold-down seats –More suitable for shared operation
4
www.REJConsult.com4 Choice of Scale Want smallest possible vehicle to allow small infrastructure Want vehicle big enough to hold useful electronics Popular Mini-ITX computer board is 6.7 x 6.7 in. (17 x17 cm) Full-sized vehicle will be higher than it’s wide, so height is critical dimension
5
Choice of Scale (cont.) An 8 in. (20 cm) high model would hold Mini-ITX board with 1.3 in (3 cm) allowance for ground clearance and vehicle structure Assuming full-sized vehicle is 72 in (183 cm) high, this gives a scale of 8/72 = 1/9 www.REJConsult.com5
6
Why Not Modify Radio Controlled Car? R/C car over ten times as fast as needed Front track to wheelbase ratio – R/C cars are typically wide for stability Custom built model can provide flexible interior space www.REJConsult.com6
7
Aspects of Vehicle that are Realistically Modeled Length, width, height Wheelbase, front track Ackermann steering – inside front wheel angled more sharply in turns www.REJConsult.com7
8
Aspects Not Realistically Modeled One central rear wheel instead of two wheels and differential No suspension – only operates on smooth, level surface Motor braking only (will add brake if necessary) No power doors or other passenger-related systems www.REJConsult.com8
9
Initial Hardware Choices Mainboard – Intel D945GSEJT with 1 GB ram and 2 GB solid state hard disk Low-level microcontroller – Atmel AVR 8-bit microprocessor packaged on small board with motor driver chip by www.pololu.com (Item 1220)www.pololu.com Steering – standard “radio controlled” servo Drive motor – standard DC gearmotor www.REJConsult.com9
10
10
11
www.REJConsult.com11 For more information about (full size) Automated Road Vehicles, please see: www.AutoRoadVehicles.com
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.