1. Add new ADCP on board of two of the four major ADRICOSM CTD network vessels Vanessa Cardin National Istitute of Oceanography and Experimental Geophysics - OGS With the contribution of: Institute of Oceanography and Fisheries – Split Agenzia Regionale Prevenzione e Ambiente dellEmilia-Romagna ADRICOSM-EXTension Final Meeting Rome 20-22 November 2006

2. Task 1.5 Introduction of new measurements in existing observational areas for training purposes Subtask 1.5.1: Add new ADCP on board of the four major ADRICOSM CTD network vessels. A new VM-ADCP system for a 10-25 m long ship to be used in shallow waters (10- 50m) will be implemented in the four ADRICOSM coastal areas networks and new entry partners will be participating to enforce training for future implementations in other coastal areas. Small ships roll is large, compromising therefore ADCP data quality. The problems related to the installation of such device on each of the five ADRICOSM ships involved in the four coastal areas networks will be assessed and the necessary developments carried out. After the initial problem assessment phase the combined collection of CTD and ADCP data will be carried out at monthly time scales in the four traditional CTD coastal monitoring networks of ADRICOSM. Responsible: OGS, Participants: ARPA-Daphne, NIB.MBS, LBM.TS, RBI.RCM, IOF, HEIS, UNIBE, IE, IBM Duration: 0-24

3. Timing and Work done during the year project… Bid for the acquisition of two ADCP – November 2005 Arrival of two RDI ADCP 600 kHz – February 2006 Course – Cesenatico May 2006 Measurements performed by Arpa Emilia Romagna andMeasurements performed by Arpa Emilia Romagna and Institute of Oceanography and Fisheries – Split from June – October 2006

4. Operation of the ADCP: Data acquisition, elaboration, quality control and principal component analysis Course on 'ADCP data collection and operation protocols for coastal areas' Franco Arena – Vanessa Cardin – Isaac Mancero Istituto Nazionale di Oceanografia e di Geofisica Sperimentale - OGS Cesenatico May 8 th -9 th, 2006

5. Outline 1.Programming and acquisition software: Direct Reading: RDI winriver Self Containing: RDI winadcp + winSC ADCP Set-up: paramenters 2.Data processing: Quality control standards and procedures First phase: Visual control and application of the Winadcp software Second phase: data download and parameters definition Third phase: standards application 3.Some applications…. Case study: Adriatic Sea.-Deep water analysis Case study: Venice lagoon.-Shallow water analysis