Download presentation
1
Simple Machines V205.07
2
Simple Machines Devices such as levers, ramps, and pulleys that make our work easier. They allow us to apply effort at one place to do work at another point and/or to change the direction of a force.
3
Simple Machines One way is to magnify an effort force so that a smaller effort can be applied over a longer distance thus moving a large load a small distance. Examples: a crowbar being used to dislodge a boulder, a nutcracker being used to crack a nut, or a block tackle pulley system being used to lift a large weight. Source:
4
Simple Machines The mechanical advantage of a machine is the ratio of the load force to the effort force. The crowbar, nutcracker, and block and tackle pulley system have a mechanical advantage greater than one. Other machines have a mechanical advantage less than one allowing magnification of the distance and speed of a movement. An example of this might be a fishing rod or baseball bat.
5
Simple Machines Inclined plane -- a sloping surface, such as a ramp.
An inclined plane can be used to alter the effort and distance involved in doing work, such as lifting loads. The trade-off is that an object must be moved a longer distance than if it was lifted straight up, but less force is needed. Examples: staircase, ramp, and bottom of a bath tub Source:
6
Simple Machines Wedge -- two inclined planes joined back to back.
Wedges are used to split things. Examples: Axe Zipper Knife
7
Simple Machines Screw -- an inclined plane wrapped around a shaft or cylinder. This inclined plane allows the screw to move itself or to move an object or material surrounding it when rotated. Examples: Bolt Spiral staircase wood screw Corkscrew screws on light bulbs
8
Simple Machines Wheel and axle -- a wheel and axle has a larger wheel (or wheels) connected by a smaller cylinder (axle) and is fastened to the wheel so that they turn together. When the axle is turned, the wheel moves a greater distance than the axle, but less force is needed to move it. The axle moves a shorter distance, but it takes greater force to move it. Examples: Door knob Wagon Toy car Bicycle gears Screw driver
9
Simple Machines Pulley -- a wheel that usually has a groove around the outside edge. This groove is for a rope or belt to move around the pulley. Pulling down on the rope can lift an object attached to the rope. Work is made easier since pulling down is assisted by gravity. Examples: Flag pole Crane Elevators Window blinds Source:
10
Simple Machines Lever -- a straight rod or board that pivots on a point known as a fulcrum. The fulcrum can be moved depending on the weight of the object to be lifted or the force you wish to exert. Pushing down on one end of a lever results in the upward motion of the opposite end of the fulcrum. Examples: Door on hinges Seesaw Hammer Bottle opener
11
Classes of Levers The class of a lever is based on the relative position of the load, effort, and fulcrum. Levers are classified into 1st class, 2nd class and 3rd class levers.
12
Classes of Levers 1st class: Crowbar Scissors
13
Classes of Levers 2nd class: Nutcracker Wheelbarrow Doors
14
Classes of Levers 3rd class: Tennis racket Tweezers
15
Questions about Simple Machines
What is a simple machine? What are the 6 simple machines? How does each simple machine work? How does each machine make work easier? What are the classes of levers and how do they work? What is mechanical advantage?
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.