1. DRAWINGS
ENG 205
CE-ME-MECE-MSE

2. DRAWING??
The ART or SKILL of making pictures, plans, etc. by using a pen or pencil

4. Engineering Drawing (ED)
A type of technical drawing used to define requirements for engineered items
More than just the drawing of pictures
A graphical language communicating ideas and information 
Communicates all needed information from the engineer who designed a part to the workers who will make it.

5. Engineering Drawing (ED)
ED & AD are both types of drawing
ED shares some traits with AD in that both create pictures.
The purpose of AD is to convey emotion or artistic sensitivity in some way (subjective impressions).
The purpose of ED is to convey information (objective facts).

6. Engineering Drawing (ED)
Anyone can appreciate AD (even a viewer has his own unique appr.)
ED requires some training to understand (like any language)
But there is also a high degree of objective commonality in the interpretation (also like other languages).
ED has evolved into a language that is more precise than natural languages
It is closer to a programming language in its communication ability.

7. DRAWING TYPES & SCALES
In engineering, most design information is shown on drawings
They are produced on computer, using CAD (computer-aided design) systems.
CAD is pronounced as a word: /kæd/.

8. DRAWING TYPES & SCALES Vocabulary item (CAD) Sample sentences
CAD systems which work in 3 dimensions will produce ‘drawing’ description files which actually describe the object being drawn, using 3D position co-ordinates.
The straightforward application of this figure implies that a drawing office could get rid of two-thirds of its draughtsmen if it installed a CAD system.

9. DRAWING TYPES & SCALES
A key factor on a drawing is the scale – that is, the size of items on the drawing in relation to their real size.
Scale: The relationship between the actual size of sth and its size on a map, diagram, or model that it represents
When all the items on a drawing are shown relative to their real size, the drawing is drawn to scale, and can be called a scale drawing.

10. DRAWING TYPES & SCALES
An example of a scale is 1:10 (one to ten). At 1:10, an object with a length of 100 mm in real life would measure 10 mm on the drawing.
It was a scale drawing of a miniature microphone, perfectly reproduced, which was in reality no larger than a sugar cube.
Both plans are drawn to the same scale.
Our models are made to scale.

11. DRAWING TYPES & SCALES
Most engineering designs consist of a set of drawings (a number of related drawings):
General Arrangement (GA) drawings show whole devices or structures, using a small scale. This means objects on the drawing are small, relative to their real size (for example, a 1:100 drawing of an entire building).

12. DRAWING TYPES & SCALES

13. DRAWING TYPES & SCALES

14. DRAWING TYPES & SCALES

15. DRAWING TYPES & SCALES
Detail drawings show parts in detail, using a large scale, such as 1:5 or 1:2. Small parts are sometimes shown in a detail as actual size (1:1), or can be enlarged to bigger than actual size (for example, 2:1).

16. DRAWING TYPES & SCALES
For electrical circuits, and pipe and duct networks, it is helpful to
show designs in a simplified form. In this case, schematic drawings
(often referred to as schematics) are used. An everyday example is
the map of a train network.
Schematic: In the form of a diagram that shows the main features or
relationships but not the details.
NOTE: When written, drawing is often abbreviated to dwg.

17. DRAWING TYPES & SCALES

18. COMP. Qs (ask & answer the Qs. in pairs)
1) What kinds of drawings does Part A mention? Ans: General arrangement, detail, and schematic dwgs 2) Describe each drawing type, indicating the differences among them. Ans: GA dwgs show whole devices or building, using a small scale. On the other hand, detail dwgs show parts in detail, using a large scale. Schematic dwgs, different from the two, show designs such as electrical curcuits or duct (tube or pipe) networks in a very simplified form.

19. TYPES OF VIEWS ON DWG
Technicians are discussing different views shown on drawings (looking at components from above, from the side, etc.) as they search for the information they require.
We need a view from above showing the general arrangement of all of the roof panels –a plan of the whole area.

20. TYPES OF VIEWS ON DWG
Plan: A drawing of a building, room, or machine as it would be seen from above, showing the shape, size, and position of the wall, doors, and windows, etc.
A street plan (= a type of map of a town showing the roads)
An easy way of planning a new bathroom is to draw a 1:20 scale plan of the room on graph paper.
So the most helpful thing to do before you start shopping is to draw up a scale plan of the room.

21. TYPES OF VIEWS ON DWG
According to the list, there are elevations of all four sides of the machine on drawing 28. So one of those should show the front of the machine.
Elevation: One side of a building, or a drawing of this by an architect
This plan shows the front, side and rear (back) elevations of the new supermarket.
Only one of the four elevations of the building will be seen with the foreign office.

22. TYPES OF VIEWS ON DWG
The accompanying sketch gives an indication of the size of the front elevation of the ice-house.
The front/rear/side elevation of a house

23. TYPES OF VIEWS ON DWG

24. TYPES OF VIEWS ON DWG
There should be a section through the pipe, showing the valve inside, on drawing 36.
Section: a drawing or a diagram of sth as it would look if it were cut from top to bottom or from one side to the other.
The illustration shows a section through a leaf.
The architect drew the house in section.

25. TYPES OF VIEWS ON DWG Figure 5.1 shows a section through this device.
The first diagram is a view of the shop from the street, and the second shows it in section.

26. TYPES OF VIEWS ON DWG

27. TYPES OF VIEWS ON DWG
We need an exploded view of the mechanism, showing the components spaced out.
Exploded: showing the parts of sth separately but also showing how they are connected to each other
An exploded diagram of a plane/anengine
Natural history illustrations often included dissections, but it is striking to find in J. S. Miller's Crinoidea (1821) an exploded drawing of one of these ‘stone lilies’ or stalked starfish.

28. TYPES OF VIEWS ON DWG
An exploded view drawing is a diagram, picture or technical drawing of an object, that shows the relationship or order of assembly of various parts.
An exploded view shows an assembly's components spread out, but positioned to show how they fit together when assembled.
You create exploded views by selecting and dragging parts in the graphics area, creating one or more explode steps. In exploded views you can:

29. TYPES OF VIEWS ON DWG
Evenly space exploded stacks of components (hardware, washers, and so on).
Attach a new component to the existing explode steps of another component. This is useful if you add a new part to an assembly that already has an exploded view.
If a subassembly has an exploded view, reuse that view in a higher-level assembly.
Add explode lines to indicate component relationships.
While an assembly is exploded, you cannot add mates to the assembly.

30. TYPES OF VIEWS ON DWG

31. TYPES OF VIEWS ON DWG
Oblique projection: shows an object with one of its faces at the front. The 3D shape of the object is shown by lines at 45 degrees from the horizontal.
A 45° plan oblique projection is sometimes referred to as an axonometric projection.

32. TYPES OF VIEWS ON DWG
Scholars have complained that mosaics are difficult to photograph even under good conditions: because of their size and situation, often only an oblique view is possible. 
While the realm of the mosaic begins at the entrance to the room, only an oblique view of the entire composition is available from that vantage point. 

33. TYPES OF VIEWS ON DWG
Isometric projection: shows an object with one of its corners at the front. The 3D shape of the object is shown by lines at 30 degrees from the horizontal.
It is an isometric view of a cube.
The isometric projection gives equal
emphasis to all three dimensions,
which are orientated at 120° intervals.

34. TYPES OF VIEWS ON DWG

35. TYPES OF VIEWS ON DWG
The drawings for each component must contain an accurately dimensioned orthographic projection, and an isometric view of the parts.
Although they use rational elements, such as the cartographic technique of isometric projection, maps like the Nouveau Paris Monumental willfully rearranged the orientation of the monuments they represented in order to display the most recognizable view of each.

36. EXERCISES & OVER TO YOU