1. SPX ITALIA
ECUREADER ENG
Autodiagnosis 4|4 2008
By ATA

2. Summary
Welcome
Update from 4.70  4.80
Special procedures
Q & A

3. Vehicles & Systems Update

4. ALFA ROMEO MITO ‘08 Cars – news of 4.80
ABS+TRACT.CONTR. BOSCH ESP EP 2
AIRBAG SIEMENS SRS EP-PROXY2
CHASSIS NETWORK DELPHI Body Computer EP 3
CHASSIS NETWORK DELPHI Body Computer Can info
DASHBOARD SIEMENS Dashboard 3
ELECTRIC POWER STEERING DELPHI ESP EP 3
ENGINE MANAGEMENT 1.4 T.B. BOSCH Motronic ME
VISUAL./TELEMATICS MARELLI-MICROSOFT Convergence

5. AUDI A4 “08 Cars – news of 4.80 ABS+TRACT.CONTR. SOST.PASTIGLIE FR
CLIMA
COMFORT SYSTEM
DASHBOARD
HEADLIGHTS SETTING
RADIO
ELECTRONIC STEERING WHEEL

6. BMW X5 (E53) Cars – news of 4.80 AUTOMATIC TRASMISSION EGS
CHESSIS NETWORK EGS
DASH BOARD Body Computer
ELECTRIC POWER STEERING Steering angle sensor
TRACTION CONTR. BOSCH ABS-DSC 5.7

7. CITROEN BERLINGO B9 C4 Cars – news of 4.80
CHASSIS NETWORK 1.6 HDI 75CV-90CV Delphi BSM
CHASSIS NETWORK JCAE BSI 5.20
SERVICE RESET HDI 75CV—90CV
SERVICE RESET i 16V C4
KEY CODING JACE
REMOTE CONTROL CODING JACE

8. FIAT PANDA PUNTO 05 Cars – news of 4.80
ENGINE MANAGEMENT 1.1 ECO 03 MARELLI IAW EP3
PUNTO 05
ELECTRIC POWER STEERING DELPHI ESPS EP 3

9. FORD MONDEO‘07 NEW GALAXY S-MAX TRANSIT Cars – news of 4.80
SERVICE RESET SERVICE
NEW GALAXY
S-MAX
TRANSIT
ABS ABS

10. IVECO NEW DAILY JEEP COMPASS Cars – news of 4.80 AIRBAG (“07) AB-SRS
ENGINE MANAGEMENT 2.0 T.D.(“07) BOSCH EDC Common Rail
AIRBAG (“07) TRW ORC

11. MERCEDES BENZ 163 M-Class “00 209 CLK-Class “00 210 E-Class “00
Cars – news of 4.80
MERCEDES BENZ
163 M-Class “00
ABS+TRACT.CONTR. TEVES ESP
209 CLK-Class “00
SUN ROOF HELLA DBE
COMBINATION SWITCH MODULE VALEO MRM
210 E-Class “00
RADIO/CD Becker/x.x Audio Sys
216 CL-Class “ 07
SERVICE RESET VDO

12. MERCEDES BENZ 221 S-CLASS “05 SPRINTER “07 Cars – news of 4.80
SERVICE RESET VDO
SPRINTER “07
CHASSIS NETWORK Marquardt OBF
CLIMA HELLA KLA
DRIVER SIDE DOOR TEMIC TSG
GEAR MANAGEMENT DAIMLERCHRYSLER
SERVICE RESET
STEERING COLUMN MODULE Marquardt EZS
COMBINATION SWITCH MODULE VALEO MRM

13. MERCEDES BENZ VITO “07 Cars – news of 4.80
ENGINE MANAGEMENT BOSCH EDC
ABS+TRACT.CONTR. BOSCH ESP ABS
AUTOMATIC TRASMISSION SIEMENS EGS
CHASSIS NETWORK Marquardt OBF
LEFT FRONT DOOR TEMIC TSG-VL
GEAR MANAGEMENT EWM
RIGHT FRONT DOOR TEMIC TSG-VR
STEERING COLUMN MODULE EZS
ELECTRONIC SUSPENSION WEHRLE ENR

14. OPEL SIGNUM 307 REATYLING PARTNER “08 Cars – news of 4.80
VISUAL./TELEMATICS GID/CID
307 REATYLING
KEY CODING JCAE
REMOTE CONTROL CODING JCAE
PARTNER “08
CHASSIS NETWORK DELPHI BSM
CHASSIS NETWORK JCAE BSI

15. LAGUNA II PHASE II (Autodetect)
Cars – news of 4.80
RENAULT
CLIO III (Autodetect)
AIRBAG TUTTI
CHASSIS NETWORK TUTTI UPH
CHASSIS NETWORK TUTTI UPC
LAGUNA II PHASE II (Autodetect)
CHASSIS NETWORK TUTTI UCH
LAGUNA II (Autodetect)
ABS TUTTI

16. ESPACE IV PHASE II (Autodetect)
Cars – news of 4.80
RENAULT
ESPACE IV PHASE II (Autodetect)
AIRBAG TUTTI
CHASSIS NETWORK TUTTI UCH
FRENO STAZ. TUTTI
ESPACE IV (Autodetect)

17. RENAULT KANGOO II “08 Cars – news of 4.80 ABS BOSCH ABS 8.0
AIRBAG BOSCH AIRBAG AB9
CHASSIS NETWORK Body Computer UCH
CHASSIS NETWORK Body Computer UPC
DASHBOARD SAGEM Kombi
ELECTRIC POWER STEERING KOYO EPS
ENGINE MANAGEMENT 1.5dci 105cv DELPHI EDC Common Rail
SERVICE RESET

18. MEGANE II (Autodetect)
Cars – news of 4.80
RENAULT
MEGANE II (Autodetect)
AIRBAG TUTTI
CHASSIS NETWORK TUTTI
CLIMA TUTTI
DASHBOARD TUTTI
ELECTRIC POWER STEERING TUTTI
MODUS (Autodetect)
CHASSIS NETWORK TUTTI UCH
CHASSIS NETWORK TUTTI UPC
PHONE TUTTI

19. SCENIC II (Autodetect)
Cars – news of 4.80
RENAULT
SCENIC II (Autodetect)
AIRBAG TUTTI
CHASSIS NETWORK TUTTI UCH
CLIMA TUTTI
ELECTRIC POWER STEERING TUTTI
VEL SATIS (Autodetect)

20. VOLKSWAGEN CRAFTER “06 Cars – news of 4.80
SERVICE RESET 2.5 TDI 109CV
SERVICE RESET 2.5 TDI 130CV
SERVICE RESET 2.5 TDI 164CV
SERVICE RESET 2.5 TDI 89CV

21. Motorbike news

22. MOTO GUZZI STELVIO Motorbike – news of 4.80
ENGINE MANAGEMENT 1200 (’07) MARELLI 59M

23. Special procedures

24. CITROEN C4 Special procedure Key coding
This function allows coding new keys as well as already programmed
Keys (used keys) but stored in the ECU memory.
Don’t forget that NO MORE than a MAX of 5 keys are accepted by the
system.
Once the function has run, the system asks for the security code
( PIN ).
CAREFUL !
Don’t insert a security code incorrectly since the ECU immobilizer
may block.
Please FOLLOW EXACTLY all messages shown step by step by
the tool during the procedure.

25. ALFA ROMEO – MITO – Special procedures ENGINE MANAGEMENT
Self-adaptation reset
This function allows resetting all engine adaptation value and at the same time calibrate the idle actuator position.
Note: In case of actuator replacement it is necessary to carry out the learning idle position through the ECU.

26. ALFA ROMEO – MITO – Special procedures ENGINE MANAGEMENT
Learning functions reset
This procedure allows resetting the learnt functions parameters in the ECU. The purpose of the learnt functions parameters is to learn the presence and features in the ECU of systems such as: clima, cruise, transmission, abs, etc.
For example:
Presence of the gear manual type is learnt through the released or pushed pedal clutch movement.
Presence of the cruise is learnt automatically when it is activated.

27. ALFA ROMEO – MITO – Special procedures ENGINE MANAGEMENT
Overboost counter reset
This function allows resetting the overboost counter that stores in the ECU how many times air feed overpressure has occurred. In this case, the relative strategy of performance limitation is activated.

28. ALFA ROMEO – MITO – Special procedures ENGINE MANAGEMENT
Knocking counter reset
This function allows resetting the knocking counter that stores in the ECU how many times knocking strategy has occurred. The puspose of this strategy is to keep under control the knocking, reducing the spark advance and using an appropriate “lambda” factor.

29. ALFA ROMEO – MITO – Special procedures CHASSIS NETWORK Key coding
This function allows coding new keys as well as already
Programmed Keys (used keys) stored in the ECU memory.
Don’t forget, NO MORE than a MAX of 8 keys are accepted
by the system.
Once the function has run, the system asks for the security code
(PIN).
CAREFUL !
ALL used keys must be coded at the same time !
If used keys are not coded, they will be ERASED and
there will be no way of re-using them again in the future !
Please FOLLOW EXACTLY all messages shown step by step by
the tool during the procedure.

30. ALFA ROMEO – MITO – Special procedures CHASSIS NETWORK
Emergency blinking
This procedure permits enabling/disabling the “blinking
light command” function when the remote control is used.
Changing country modality
This function permits modifying the alarm modality concerning the country chosen.
Select the country where the vehicle was registered.

31. ALFA ROMEO – MITO – Special procedures CHASSIS NETWORK Supply modality
This function permits enabling the utilities on chassis network
(radio/cd, wipers, clima, lights inside ecc.) disabled in the Factory
or Showroom modality. Usually this modality is present when the
vehicle arrives from the manufacturer.

32. ALFA ROMEO – MITO – Special procedures DASHBOARD Beam Basic setting
Through this function it is possible to store the basic setting (position “O”) of the manual Beam adjuster (on the dash).
It must be done each time replacements or adjustments are
carried out concerning headlights, to obtain the correct beam
level when the internal adjuster on the dash is set to “0”.

33. ALFA ROMEO – MITO – Special procedures DASHBOARD
Odometer Reset (Driven Km/Miles)
This function permits resetting to ZERO the total amount
of driven Km or Miles on the Odometer.
Please note that the operation will ONLY be accepted if the
value is under 200 Km / 125 miles .

34. ALFA ROMEO – MITO – Special procedures DASHBOARD Reset service
This function allows resetting the dashboard maintenance indicator back to the factory default.
The device has been programmed in this way to inform the driver again of the factory preset kilometers in order to carry out the maintenance.

35. ALFA ROMEO – MITO – Special procedures DASHBOARD
Safety Belts Alarm ENABLING
The following operation enables the acoustic alarm for
unattached safety belts
Safety Belts Alarm DISABLING
The following operation disables the alarm for unattached
safety belts

36. ALFA ROMEO – MITO – Special procedures ABS
Acceleration-sensor (longitudinal ) Calibration
Through this function it is possible to run the sensor
autocalibration.
It must be done when replacing ABS ECU or the sensor.
To proceed with the calibration, be sure that all components are
properly installed and connected, then run the procedure.

37. ALFA ROMEO – MITO – Special procedures ABS Autotest
This procedure permits checking if solenoid valves and the
pump in the hydraulic ABS unit work properly.

38. CITROEN BERLINGO 08 Special procedures CHASSIS NETWORK
Customer modality
This function permits enabling the utilities on chassis network
(radio/cd, wipers, clima, lights inside ecc.) disabled in the Factory
or Showroom modality. Usually this modality is present when the
vehicle arrives from the manufacturer.

39. RENAULT KANGOO II Special procedures ENGINE MANAGEMENT 1.5 dCi
Injectors coding
This operation allows storing in the ECU each individual
cylinder’s injector code in case of replacement.
In this way, the ECU can manage properly the
Injection time according to the new injectors.
Generally the codes are supplied with the injectors, but in
any case are printed on each body.
At the beginning of the procedure, just insert the code.

40. JEEP COMPASS Special procedures AIRBAG Capsizal sensor disabling
This function allows disabling the capsizal sensor so that it cannot
operate.
Capsizal sensor enabling
This function allows enabling the capsizal sensor in case it has
been previously disabled.

41. FIAT PUNTO 05 Special procedures ELECTRIC POWER STEERING
Steering wheel angle sensor calibration
This procedure allows steering wheel angle sensor calibration
and it must be carried out each time there is sensor
replacement, wheel alignment or any intervention on the
Directional Tread.
To achieve it, correctly carry out the following:
The vehicle must be stationary and on a flat surface.
Centrally align wheels and steering wheel.
Set off the procedure.
To check that the procedure has gone successfully, drive the
vehicle at 30km/h (20mph) and steering fully left and right check
if the steering returns to its original position (+/- 20 degrees).

42. Q & A