1. This PowerPoint is a quick guide to configuration of SheepShaver (v 2.3) for running Mac OS 8.5 to 9.0.2 on a PC under Windows XP This is a helper. In no case the author can be considered liable of bad issues on your computer… Jean-Pascal Cogné Université de Paris 7 - Denis Diderot IPG 4 Place Jussieu 75252 Paris Cedex 05 France Any comment ? : click

2. About SheepShaver SheepShaver is an Open Source PowerPC MacOS runtime environment developped by Gwénolé Beauchesne, which runs MacOS 7.5.2 thru MacOS 9.0.4 on the following platforms: Linux (i386, ppc, x86_64), MacOS X (i386, ppc), Darwin, NetBSD 2.0, FreeBSD 5.3 and Windows for x86. I tried it on a series of Mac, including a Mac Intel, and some PC's with Windows XP, it works great !! Here is the link to the project, with free downloads: http://www.gibix.net/dokuwiki/en:projects:sheepshaverhttp://www.gibix.net/dokuwiki/en:projects:sheepshaver Please, visit this site before attempting to install SheepShaver I also provide below a number of links to help sites: http://gwenole.beauchesne.info/en/projects/sheepshaver/help/installation http://www.open.ou.nl/hsp/Engels/SheepShaver%5FHelp/windows/index.html http://www.emaculation.com/index.php?s=sheepshaver There are also numerous forums for this topic, you may need them… OK, let’s go…!

3. Here is the content of SheepShaver folder, after download, and following the instructions of Gwenolé Beauchesne at: http://gwenole.beauchesne.info/en/projects/sheepshaver/help/installation http://gwenole.beauchesne.info/en/projects/sheepshaver/help/installation Installing SheepShaver under Windows XP

4. You will need an OS ROM from Mac.. This ROM can be found on any Mac OS 8 or 9 install CD; see also numerous forums on this subject.. See: http://www.gibix.net/dokuwiki/en:projects:sheepshaver for more info…http://www.gibix.net/dokuwiki/en:projects:sheepshaver Installing SheepShaver under Windows XP

5. You will also need to run this application before launching SheepShaverGUI See: http://www.gibix.net/dokuwiki/en:projects:sheepshaver for more info…http://www.gibix.net/dokuwiki/en:projects:sheepshaver Installing SheepShaver under Windows XP

6. Finally, look for the file named « cdenable.sys » in this folder.. Installing SheepShaver under Windows XP

7. ..and place this file in: C:\WINDOWS\system32\drivers… Installing SheepShaver under Windows XP

8. Then… run SheepShaverGUI.. Installing SheepShaver under Windows XP

9. Here is the first Tab of SheepShaverGUI: The place where you define volumes and shared folders… Installing SheepShaver under Windows XP

10. Here is the first Tab of SheepShaverGUI: The place where you define volumes and shared folders… 1. Create a disk image which will contain your Mac Installing SheepShaver under Windows XP

11. Here is the first Tab of SheepShaverGUI: 1. Create a disk image which will contain your Mac Here I have created a 512 Mb disk, named « disk » in the C:\Program Files\SheepShaver-2.3 folder.. Installing SheepShaver under Windows XP

12. Here is the first Tab of SheepShaverGUI: 2. Select Boot from CD-ROM since the first run will consist in installing Mac OS from a CD… Don’t forget (as me, here) to specify the CD- ROM Drive, default D:\ Installing SheepShaver under Windows XP

13. Here is the first Tab of SheepShaverGUI: 3. Hit the checkbox to define shared drives on your PC. This will allow to exchange stuff between your host PC and SheepShaver’s Mac Default settings are ALL drivers. Some internauts find this a little bit dangerous… Surf on forums to make your own opinion Installing SheepShaver under Windows XP

14. In the second Tab, you setup the size of your Mac window… No comments… Installing SheepShaver under Windows XP

15. Third Tab: define the link to BasilikII_keycodes file Use the Browse button to define the path of this file which is normally situated in your SheepShaver folder Installing SheepShaver under Windows XP IMPORTANT: This file MUST be defined to allow your PC computer to use a Mac-like keyboard…

16. Fourth Tab: defining serial ports… I did not make anything here.. There are numerous forums on this subject, if needed… Installing SheepShaver under Windows XP

17. Fifth Tab: defining network settings… The same: I did not make anything here.. There are numerous forums on this subject, if needed… Installing SheepShaver under Windows XP

18. Sixth Tab: one of the most important settings, memory..! Installing SheepShaver under Windows XP

19. Sixth Tab: one of the most important settings, memory..! 1. Define the size of the memory you wish to use in your Mac, here set at 512 Mb Installing SheepShaver under Windows XP

20. Sixth Tab: one of the most important settings: Memory..! 2. Use the Browse button to specify the path to Mac ROM. I have renamed it: Mac_OS_ROM, and placed it in the SheepShaver folder… Installing SheepShaver under Windows XP

21. And the final Tab… Be sure to check the Enable JIT Compiler checkbox… Installing SheepShaver under Windows XP

22. And that’s all..! Just click on Start button, with the Mac OS install CD in the disk drive… Important Notes: - Mac Install CD should be loaded in the disk drive before loading SheepShaverGUI (i.e. before the first step of this tutorial…) - SheepShaver should start on the CD, and you are ready to install MacOS (8.5 to 9.0.2 recommended) - and finally…. Installing SheepShaver under Windows XP

23. You will be fascinated by this wonderful PaleoMac application running under Mac OS 9 on your PC…! Installing SheepShaver under Windows XP

24. You will be fascinated by this wonderful PaleoMac application running under Mac OS 9 on your PC…! Mac desktop PC desktop This is the way both worlds can exchange… Installing SheepShaver under Windows XP

25. Any comment or suggestion? cogne@ipgp.jussieu.frcogne@ipgp.jussieu.fr