Download presentation
Presentation is loading. Please wait.
Published byLawrence Richardson Modified over 9 years ago
1
ROT Equipment Details ROT Equipment – unit consists of 1.2 Meters Dish antenna (Now 90cms dia dish also is suitable) LNBC, Feed IF Cables for Connecting link between Dish to STB Set Top Box (STB/DVB) Remote Control for STB TV Set Audio Video cable connectors UPS & batteries (Optional) Power board 1
2
1.1/1.2 mts Dish Antenna ROT Equipment Details 2
3
LNBC 3
4
SET TOP BOX/IRD – RG6 Cable and Connector STB RG6 Cables 4
5
Audio Video Cables RAC to RAC cable 5
6
GSAT -8 Satellite Technical Details Technical Details are as follows: Satellite Name : GSAT 8 Longitude : 55° East. Downlink Frequency : 10968.375 MHz Symbol Rate : 10851 MSPS F E C : ½ Polarisation : Linear Vertical 6
7
ROTs REORIENTATION Procedural Steps A) Power supply B) STB configuration C) Dish antenna orientation A)Power supply: Check power supply 230Volts A/C TV set and STB turn on to the power supply If UPS is functional ensure power supply to the power board. 7
8
ROTs REORIENTATION B) STB Configuration: Parameter Setting Procedure in IRD Go to the MENU mode /Press Menu button Display appears like this on TV 8
9
ROTs REORIENTATION Press “MENU” button. Then Display appears. 9
10
ROTs REORIENTATION By using Left/Right and Up/Down Arrows Select “Installation” Sub-Menu. Press “OK”. 10
11
ROTs REORIENTATION Then display appears as Then select “LNB Setup” and press “OK”. 11
12
ROTs REORIENTATION Then display appears as Enter the satellite name and LNB Frequency low as “09750 MHz”. 12
13
ROTs REORIENTATION Then save the settings. Select “Satellite Setup”. Press “OK”. 13
14
ROTs REORIENTATION Display appears as Select and Enter The Trans. Freq. Symbol rate, LNB Polarity, FEC and then “Save”. Select “Searching” and press “OK”. 14
15
ROTs REORIENTATION After Searching the channels are saved. 15
16
ROTs REORIENTATION The MANA TV channels programmes are received. 16
17
17
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.