1. Free Fall Free fall: when an object is only affected by gravity
Consider an apple falling from a tree. We know that it starts at rest and gains speed as it falls, or accelerates.
Gravity causes the apple to accelerate downward and is said to be in free fall.
Free fall: when an object is only affected by gravity
SI unit: m/s2 ( for acceleration due to gravity)
Ex: g = 10 m/s2 on Earth.
The letter g represents the acceleration due to gravity.

2. Equation: v = gt
v = velocity or speed (m/s)
g = acceleration due to gravity (10 m/s2 on Earth)
t = elapsed time (s)
**Hint - as soon as you see any of the following phrases in a word problem, write g = 10 m/s2 for a given: free fall, falling, dropped, thrown**

3. Remember, the object’s velocity increases by 10 m/s every second it falls
Time falling
velocity 0s
1 s
2 s
3 s
4 s
5 s 6s 7s 8s 9s

4. Check Your Understanding
What would the speedometer reading on a falling rock be 4.5 seconds after it drops from rest?
v = ?
g = 10 m/s2
t = 4.5s
v = gt
v = (10 m/s2) (4.5s)
v = 45 m/s

5. How about 8 seconds? v = gt v = 80 m/s How about 15 seconds?
g = 10 m/s2
t = 8s
v = gt
v = (10 m/s2) (8s)
v = 80 m/s
How about 15 seconds?
t = 15s
v = (10 m/s2) (15s)
v = 150 m/s

6. Now consider an object thrown straight up
Now consider an object thrown straight up. It will continue to move straight up, then it comes back down.
At the highest point, the object changes its direction and the objects instantaneous speed is 0 m/s.
Whether the object is moving up or down, the acceleration of the object is always 10 m/s2.
It is just -10 m/s/s when the object is moving up
Because gravity is slowing the object down instead of speeding it up

7. Because an object in free fall increases the rate of distance covered every second, we cannot use v =d/t to find distance.
Equation: d = ½ gt2
d = distance (m)
g = acceleration due to gravity (10 m/s2 on Earth)
t = elapsed time (s)

8. Use the distance formula to find how far the object will fall at each second
Time falling
Distance travelled
0 s
1 s
2 s
3 s
4 s
5 s
6 s
7 s
8 s
9 s

9. Check Your Understanding
What is the distance an object falls in one second?
d = ?
g = 10 m/s2
t = 1 s
d = ½ gt2
d = ½ (10)(12)
d = 5 m

10. Warm up 9/17 (Write the questions and then answer them!)
What does it mean if an object is in free fall?
How do we calculate speed of an object if it is in free fall?
What does g represent? What’s is it’s numerical value?
How do we calculate the distance an object falls when it is in free fall?

11. The problem with air
When you drop a crumpled piece of paper and a flat sheet of paper they should fall and hit the ground at the same time, but do they?
The reason the crumpled piece of paper hits the ground first is because it experiences less air resistance
A frictional force (means it goes against motion) caused by air
The greater the surface area of an object, the more air resistance it feels

12. At the end of class I will pass back last week’s quiz
Next steps:
You are going to work some free fall problems on your own paper and put up the answer on your white board for me to check
Make sure you put the problem # with the answer on the white board so I know which one to check
At the end of class I will pass back last week’s quiz
You can complete quiz corrections and turn them in by Wednesday for ½ credit back
On a separate sheet of paper rework any questions missed
Be sure to include all work