1. Showing you how to thread a machine There are lots of different sewing machines available to buy in shops. However they all are basically the same when it comes to threading them up. I’ll explain how to do it in stages.

2. Using the sewing machine A close up of the front of the machine At the end of this lesson you will have learnt: learn how to use the sewing machine safely main parts of the sewing machine how to thread a sewing machine

3. Hand wheel Handle I have an excellent idea!! -Machine Margaret: part sewing machine /part Robot! Sewing hems everywhere!! Well it would be Easier!! This sewing machine will be similar to the one you will have in school Thread holder

4. Take up arm Guide plate Presser foot On closer inspection this is what the front of your machine will look like. These are the main elements to the front of the machine no matter what make you have Bobbin

5. Zig – Zag stitch dial Needle position - should always be in middle Buttonhole dial Straight stitch dial and reverse. These dials are important as they control the type and size of the machine stitches.

6. Threading a sewing machine Follow the steps to thread your machine – you cannot miss out any of the steps !

7. The foot control - (pedal) this is how you make the sewing machine stitch. You need to take note of the following : your heel must be on the floor. Press the foot control with the middle of your foot. Safety Never press the foot control down quickly – slowly. Never press another persons foot while they are using it.