2. Guide to using Strucad’s drawing viewer Provided By Network Drafting Service Pty Ltd

3. 1. Ensure that both struwalk.exe and SpfView.exe have been installed. First enter the start bar at the bottom left of your windows tool bar. First enter the start bar at the bottom left of your windows tool bar. Click “ My Computer ”. Click “ My Computer ”. Select your disk drive and double click. Select your disk drive and double click. Open the folder ( in this example the folder is labeled burn 4270 ) Open the folder ( in this example the folder is labeled burn 4270 ) Enter the folder labeled ‘ Redist ’ Enter the folder labeled ‘ Redist ’ Inside are folders ‘struwalker’ and ‘spfviewer’. Inside are folders ‘struwalker’ and ‘spfviewer’. Double click on each icon and follow the prompts to install. Double click on each icon and follow the prompts to install.

4. 2. Open StruCad Drawing Package.zpf Open folder ZPF Open folder ZPF Double click icon inside. Double click icon inside.

5. To ensure printing and operations go smoothly extract the file to your hard drive. Click to continue step Click to continue step

6. File --> extract package (to C drive). Choose Choose your hard drive or a preferred location.

7. To view drawings Simply Simply click on the desired drawing in the appropriate subfolder This This is an example of what may appear.

8. To Print Drawings The The most time efficient way is to hold down the shift key select the top drawing so it is highlighted. Then Then select the last drawing in that sub folder. They They should then all appear high lighted (like example) Continue Continue this step in all drawing sub folders (GA’s, Views etc.) Once Once all are highlighted press the print button. * not possible to print reports from this program*

9. Created for your Convenience Network Network Drafting Services Services Pty Ltd 13 / 4 University Drive Robina 4226 QLD Australia PH : 07 55 788 736 FAX : 07 55 788 731 MOB : 0410 440 393 Email : nds888@netspace.net.au Thank you...