1. Guarding Belt Conveyors

2. 1.Setting The Guarding Policy 2.Things to Consider When Building a Guard or Guarding an Area 3.Common Areas Requiring Guarding 4.Training

3. Conveyor Belts Move Faster Than You!

4. What can happen in one second? A human eye can only blink twice in one second. At rest the human heart beats once per second.

5. For the average person the time needed to react to an unexpected sensation is about one second.

6. Consider the following A typical conveyor belt travels in the range of 300 feet per minute. This means the belt is moving at 5 feet per second. That is one revolution of an 18” pulley.

7. That conveyor belt moving at 300 feet per minute or 5 feet per second will draw… Your tool Your loose clothing Your hand Your arm 5 feet into the pinch point before you can react!

8. The Guarding Policy

9. Company Guarding Policy Developed through Owner/Management and Worker/Joint Health and Safety Committee. These groups interpret the current MSHA Guarding Standards to establish their guarding policy. Using Standards such as the “ANSI B11-Series Safety Standards for Machine Tools”, for guidelines. From this a guarding best practices can be developed.

10. ANSI B11-Series Safety Standards for Machine Tools. (American National Standards Association) It was developed to determine guard mounting distances based on the maximum opening sizes in the guarding. The standard ensures that any body part which can fit through the mesh won’t be able to contact the pinch point inside.

11. What is the safe distance from a pinch point?

12. DIRECTION OF BELT TRAVEL PINCH POINT What and where is the in-running pinch point?

13. The distance that you are required to guard around a pinch point. DIRECTION OF BELT TRAVEL PINCH POINT 36 ”

14. Guard Mounting Distances & Proper Mesh Sizing

15. Safety Gauge CLICK HERE FOR ILLUSTRATED GUIDE

16. Safety Gauge CLICK HERE FOR ILLUSTRATED GUIDE

18. Building a Guard or Guarding Area THINGS TO CONSIDER

19. Ergonomics A well designed guard should not weigh more than 50 pounds. It should not require more than one person to remove or install it. WRONG WAY TO CARYCORRECT WAY TO CARY

20. Simplicity Guards should fit into place easily with minimal thought or effort.

21. Fastening System Consider what type of fastening system will work best for the application.

22. Wedge Clamp Wedge clamp is never removed so your guard always has a place to go back on too.

23. Wedge Clamp Cable Ties must be used to ensure compliancy. Cable Tie require a tool to remove it. (Side Cutters)

24. Maintenance Do not design a guard that requires constant maintenance.

25. Recognition Is the Guard recognizable as a “Guard”? Paint your guards a color which will standout from your equipment. Standardize a color which means “Danger” Safety Yellow is a common color.

26. Adjustment Can adjustments be made to guarded components without: 1. the loss of protection? 2. the modification of the guard?

27. Inspection Can guarded components be inspected without removing the guard?

28. Create A Hazard Does the design, material & construction of the guard create a hazard? Free of: Burrs Sharp Edges Pinch Points

29. Standardization It is easier to install new guarding if you are using a common standard. Also, it is easier to educate new and existing workers on safe guarding practices.

30. Common Areas Requiring Guarding

31. Tail Pulley

32. Receiving Hopper/Skirt Boards

33. Gravity Take Up Pulleys

34. Gravity Take Up Counter Weight Enclosures

35. Head Pulleys/Drive Pulleys/Snub Pulleys

36. Return Rollers - within 7ft from the ground or walking and working surfaces. Example - If a return roller is 6 feet above a walkway, and the area is 50 feet above the ground, it needs to be guarded.

37. Return Rollers - within 7ft from the ground or walking and working surfaces.

38. Return Rollers – above 7ft from the ground or walking and working surfaces.

39. Return Rollers – above 7ft and 8ft from the ground.

40. Return Rollers – on the walkways.

41. Uprights or Obstructions which could trap

42. V-Belts

43. Other Circumstances to Consider

44. Conveyor Bends

45. Tripper Conveyors

46. Radial Drives on Portable Stacks

47. Self Closing Gate Used on top of ladder exits so person doesn’t back or walk into the ladder opening. Gate can also be used at the bottom of stairs to limit access.

48. Self Closing Gate

49. Training

50. Training should involve instruction and hands-on training. Specific training is a crucial part of any effective guarding system.

51. 3 Questions to Ask Your Workers 1. How do the guards provide protection for the specific pinch point? 2. How and under what circumstances, can guards be safely removed and when must the guards be replaced? 3. What do you do if a guard is damaged or missing?

52. Conclusion 1. Keep it simple !!! 2. Standardize your guarding. 3. Properly train your workers.

53. Thank You!