1. SATELLITE MIGRATION PROJECT Contractor Orientation

2. SATELLITE FREQUENCY Homecast 1.Press “menu”, select “installation” and press “ok”. 2.Select “factory reset” and press “ok”. 2

3. SATELLITE FREQUENCY Homecast 3.Enter the “access code”, default is “1234”. 4.A prompt will appear, select “yes” and press “ok”. 3

4. SATELLITE FREQUENCY Homecast 5.Wait for the Dream Satellite TV Logo to appear. Press “menu”, select “installation” and press “ok”. 6.Go to “dish setup” and press “ok”. 4

5. SATELLITE FREQUENCY Homecast 7.Enter “access code”, default is “1234”.8.Under “transponder”, press “right navigation key” on remote control. 5

6. SATELLITE FREQUENCY Homecast 9.Select “new TS” and press “ok”.10.Enter the following parameters: a.Frequency - 12390 b.Polarity - Vertical c.Symbol Rate - 25600 6

7. SATELLITE FREQUENCY Homecast 11.Press “ok” twice. Under “installation”, select “manual search” and press “ok”. 12.Select “frequency” and press “right navigational key” on remote control. Select the “new frequency” added and press “ok”. 7

8. SATELLITE FREQUENCY Homecast 13.Go to “network search” and press “right navigational key” to “enable” setting. 14.Press “ok” and a display will show “do you want to save changes?”, select “yes” and press “ok”. 8

9. SATELLITE FREQUENCY Homecast 15.Press “exit” button. 16.Under installation. Repeat steps 6-15 but enter the frequency “12430” in step 11. 17.Repeat steps 6-15 but enter the frequency “12470” in step 11. 9

10. FORMS & FORMATS 10 JOB ORDER FORM Control No.: Installer Name : Dealer : Subscriber Name : Subscriber Contact No. : Address : Items Replaced : Low Noise Block (LNB) ConverterOthers : Antenna Dish Bracket RG-6 Cable I certify that that the Out-Door-Unit (ODU) has been re-aligned/relocated and my unit is working properly. Subscriber/Representative Name & Signature