Presentation is loading. Please wait.

Presentation is loading. Please wait.

BASIC ELECTRICITY LEARNING OUTCOME The basic study of the principals of electricity.

Similar presentations


Presentation on theme: "BASIC ELECTRICITY LEARNING OUTCOME The basic study of the principals of electricity."— Presentation transcript:

1 BASIC ELECTRICITY LEARNING OUTCOME The basic study of the principals of electricity

2 OBJECTIVES Describe the parts of an atom. Explain conductors and Insulators Define electrical terms Demonstrate electrical color code Describe and verify Ohms law

3 THE ATOM To understand electricity you must understand the atom. The Atom is made up of three main parts. –Protons –Electrons –Neutrons Clipart by MS Clipart 2013

4 THE COMPONENTS Protons are at the center of the atom with a positive charge. The Neutrons are also at the center of the atom with neither a negative or positive charge. The Electrons are attracted to the protons and create an orbit around them with a negative charge

5 THE PRINCIPAL Because the electrons are positive and the protons are negative they are attracted to each other. The energy located in the electrons is called the electromotive force and keeps the electron in motion in orbit around the center. The charge is the characteristic of a material that enables it to exert force on another material.

6 ELECTRIC FLOW The flow of electrons occurs when a conductor has a negative voltage connected to one end and a positive connected to the other end. Conductors allow electricity to flow freely while insulators restrict or inhibit the flow electricity.

7 CONDUCTORS AND INSULATORS Conductors- metals make great conductors –Gold –Copper –Tin –Silver Insulators- Non-metals make great insulators –Glass –Rubber –Plastics

8 CONDUCTORS AND INSULATORS Copper allow the electricity to flow while the plastic insulator keeps the electricity in

9 CURRENT Current flows in a loop from negative to positive.

10 TYPES OF CURRENT AC(Alternating Current)- Alternating current flows from 0v to a Positive peak value to a negative peak value overtime. Powers our homes and offices through the wall DC(Direct Current)- Direct Current has a consistent and steady positive voltage over time. Powers our cars, flashlights and cell phones through batteries.

11 DC-DIRECT CURRENT

12 AC-ALTERNATING CURRENT

13 TERMS Volt Amp Current Resistors Watts Ohms Capacitors Inductors Transformers Grounding

14 TERMS Volts - is the unit of measure for the voltage of a circuit Amp - is the unit of measure for the current of a circuit. Current - is the flow of electron in a circuit. Resistors - Provide opposition to the flow of electrons in a circuit.

15 TERMS Watts - is the amount of power or work a circuit is using. Ohms - is the unit of measure for resistance. Capacitor - Stores electricity Inductor - Resists changes in current Grounding - Diverts unwanted or unused electricity.

16 RESISTORS-COLOR CODE DigitMultiplier Tolerance Black0110^01% Brown11010^12% Red210010^23% Orange3100010^34% Yellow41000010^4 Green510000010^5 Blue6100000010^6 Violet71000000010^7 Grey810000000010^8 White9 Gold 0.1 5% Silver 0.01 10% None 20%

17 RESISTOR-VALUE What is the Value?

18 RESISTOR-VALUE Value 22000000 Or 22Meg Ohms

19 RESISTOR-VALUE What is the Value?

20 RESISTOR-VALUE Value 4100 or 4.1K Ohms

21 OHMS LAW V= I x R

22 VOLTAGE(V) OR (E) Can be found with: V=IxR V= P/I The square root of (RXP)

23 CURRENT (I) Can be found with: P/V V/R Square root of (P/R)

24 RESISTANCE (R) Can be found with: V/I V^2/P P/I^2

25 POWER (P) Can be found with: VxI RxI^2 V^2/R

26 SERIES- CIRCUIT

27 PARALLEL CIRCUIT

28 ELECTRICAL SWITCHES Toggle Slider Dip Rotary

29 POWER PROBLEMS Surge Over Voltage Under Voltage Brownouts Spikes Sags

30 POWER PROBLEMS Surge - A large boost of electricity at least 15-20% above the rated amount. Spike - A very large as high as 10000 volts Sag - A drop in the total voltage that can last up to a couple of minutes. Brownout - A stress on a power brought on usually by hot or cold spells. Can sometimes last for days.

31 GROUNDING Grounding is necessary to provide a direct path for excess electrical current.

32 QUESTIONS Michael Harsh Mharsh@collin.eduMharsh@collin.edu All graphics were created by Mike Harsh and used with permission unless otherwise noted. This material is based upon work supported by the National Science Foundation under Grant No. 1205077 and Grant No. 0903239. Any opinions, findings and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.


Download ppt "BASIC ELECTRICITY LEARNING OUTCOME The basic study of the principals of electricity."

Similar presentations


Ads by Google