1. New Features ANSYS 9.0 CFX-Mesh 9.0/CFX 5.7.1 (CFX in WB) ICEM CFD 5.1/AI*Environment Workshops 9.0 New Features

2. Inventory Number: 002157 ANSYS Release: 9.0 Published Date: October 1, 2004 Registered Trademarks: ANSYS ® is a registered trademark of SAS IP Inc. All other product names mentioned in this manual are trademarks or registered trademarks of their respective manufacturers. Disclaimer Notice: This document has been reviewed and approved in accordance with the ANSYS, Inc. Documentation Review and Approval Procedures. “This ANSYS Inc. software product (the Program) and program documentation (Documentation) are furnished by ANSYS, Inc. under an ANSYS Software License Agreement that contains provisions concerning non- disclosure, copying, length and nature of use, warranties, disclaimers and remedies, and other provisions. The Program and Documentation may be used or copied only in accordance with the terms of that License Agreement.” Copyright © 2004 SAS IP, Inc. Proprietary data. Unauthorized use, distribution, or duplication is prohibited. All Rights Reserved. Training Manual Workshops – 9.0 New Features

3. 9.0 New Features Workshop ANSYS v9.0 October 1, 2004 Inventory #002157 TOC-3 © 2004 ANSYS, Inc. Table of Contents ANSYS Structural 1.Manual Rezoning - Elastomeric Seal WS1-1 2.Spotweld - Thin Plate Assembly WS2-1 3.Solid-Shell Element SOLSH190 – a.Cantilever Beam Modal Analyses WS3-1 b.Cantilever Beam Tip-deflection Static Analyses WS3-4 c.Large Deformation, Plasticity Analysis with Contact WS3-5 d.Variable Thickness “Flat” Circular Plate WS3-8 ANSYS Multiphysics 4.HF Emag - Planewave Excitation Defined as a Port WS4-1 5.LF Emag in Workbench – Motor AnalysisWS5-1 6.Coupled-Field Material Property - Thermoelectric Cooler WS6-1 ANSYS Workbench Structural 7.Load Steps in Workbench – Metal Shaft w/ Rubber Boot WS7-1 8.2-D in Workbench - Axisymm Analysis of Pipe AssemblyWS8-1 ANSYS Robust Design 9.Robust Design – Min. Life for a Titanium Turbine Blade WS9-1 Distributed ANSYS 10.Distributed ANSYS WS10-1 ANSYS CFX 5.7.1 11.Catalytic Converter WS11-1 12.Heating CoilWS12-1 ANSYS ICEM CFD 5.1 13.Quad Meshing of a Stamped Part WS13-1 14.Automatic Hex Meshing of a Bent Bar WS14-1 15.Hybrid Meshing of a Simple HVAC AssemblyWS15-1