Presentation is loading. Please wait.

Presentation is loading. Please wait.

CIS 1140 Network Fundamentals Chapter 10 – In Depth TCP/IP Networking Collected and Compiled By JD Willard MCSE, MCSA, Network+, Microsoft IT Academy Administrator.

Similar presentations


Presentation on theme: "CIS 1140 Network Fundamentals Chapter 10 – In Depth TCP/IP Networking Collected and Compiled By JD Willard MCSE, MCSA, Network+, Microsoft IT Academy Administrator."— Presentation transcript:

1 CIS 1140 Network Fundamentals Chapter 10 – In Depth TCP/IP Networking Collected and Compiled By JD Willard MCSE, MCSA, Network+, Microsoft IT Academy Administrator Computer Information Systems Instructor Albany Technical College

2 Attention: Accessing Demos This course presents many demos. The Demos require that you be logged in to the Virtual Technical College web site when you click on them to run. To access and log in to the Virtual Technical College web site: –To access the site type www.vtc.com in the url windowwww.vtc.com –Log in using the username: CIS 1140 or ATCStudent1 –*Enter the password: student If you should click on the demo link and you get an Access Denied it is because you have not logged in to vtc.com or you need to log out and log back in. *Remember that passwords are case sensitive so enter it in all lower case letters.

3 Objectives Understand methods of network design unique to TCP/IP networks, including subnetting, CIDR, and address translation Explain the differences between public and private TCP/IP networks Describe protocols used between mail clients and mail servers, including SMTP, POP3, and IMAP4 Employ multiple TCP/IP utilities for network discovery and troubleshooting

4 Designing TCP/IP-Based Networks TCP/IP protocol suite use –Public Internet connectivity –Private connection data transmission TCP/IP fundamentals –IP: routable protocol Interfaces requires unique IP address Node may use multiple IP addresses –Two IP versions: IPv4 and IPv6 IPv4: older; more common IPv4 addresses –Four 8-bit octets Binary or dotted decimal Network host name assignment –Dynamic using DHCP –Static Network classes: A, B, C, D, E –Class D, E addresses reserved –Node’s network class provides information about segment network node belongs to IP Addressing Demo

5 Subnetting Separates network –Multiple logically defined segments (subnets) Geographic locations, departmental boundaries, technology types Subnet traffic separated from other subnet traffic Reasons to separate traffic –Enhance security –Improve performance –Simplify troubleshooting

6 First, simplest IPv4 addressing type Adheres to network class distinctions Recognizes Class A, B, C addresses Fixed network ID size ultimately limits number of hosts a network can include Difficult to separate traffic from various parts of a network Address Classes Demo Classful Addressing in IPv4

7 IP addresses and their classes Network information (network ID) –First 8 bits in Class A address –First 16 bits in Class B address –First 24 bits in a Class C address Host information –Last 24 bits in Class A address –Last 16 bits in Class B address –Last 8 bits in Class C address

8 Classful Addressing (continued) Example IP addresses with classful addressing

9 Subnet Masks Subnetting depends on subnet masks to identify how a network is subdivided –Indicates where network information is located in an IP address –“1” bits indicate corresponding bits in IP address contain network information –“0” bits indicate corresponding bits in IP address contain host information To calculate host’s network ID given IP address and subnet mask, perform ANDing

10 Defining a Subnet Mask Convert the Number of Segments to Binary Count the Number of Required Bits Convert the Required Number of Bits to Decimal (High Order) 1 1 2 2 3 3 Example of Class B Address Number of Subnets Binary Value Convert to Decimal 6 0 0 0 0 0 1 1 0 = 6 (3 Bits) 4+2 255. 255. 224. 0 11111111111111111110000000000000 Subnet Mask Subnet Masks DemoSolutions for Masks Demo

11 IPv4 Subnet Masks Network class –Associated with default subnet mask Default IPv4 subnet masks

12 Determining the Destination of a Packet (ANDing) 10011111111000000000011110000001 11111111111111110000000000000000 10011111111000000000011110000001 11111111111111110000000000000000 10011111111000000000000000000000 IP Address Subnet Mask IP Address Subnet Mask Result Local and Destination Host’s Subnet Masks Are ANDed ANDing –Combining bits Bit value of 1 plus another bit value of 1 results in 1 Bit value of 0 plus any other bit results in 0 –ANDing logic 1: “true”, 0: “false –If ANDed results of source and destination hosts match, the destination is local. –If ANDed results of source and destination hosts do not match, the destination is remote and the packet is sent to the default gateway. ANDing Demo

13 Reserved Addresses Certain types of IP addresses reserved for special functions Cannot be assigned to node network interface; used as subnet masks Network ID –Bits available for host information set to 0 –Classful IPv4 addressing network ID ends with 0 octet –Subnetting allows network ID with other decimal values in last octet(s) Broadcast address –Octet(s) representing host information equal all 1s –Decimal notation: 255 Addressing Rules; the Logical AND Operator Demo

14 IPv4 Subnetting Techniques Subnetting breaks classful IPv4 addressing rules –Some bits that in classful addressing would represent host information are changed to represent network information –Reduces the number of usable host addresses per subnet –Hosts, subnets available after subnetting related to host information bits borrowed Subnetting Shortcuts Demo Borrowing Bits DemoSubnetting Demo Borrowing Bits Demo Solutions for Borrowing DemoSubnet Numbers Demo

15 Implementing Subnetting Determine the Number of Required Network IDs –One for each subnet –One for each wide-area network connection Determine the Number of Required Host IDs per Subnet –One for each TCP/IP host –One for each router interface Define One Subnet Mask Based on Requirements Define a Unique Subnet ID for Each Physical Segment Based on the Subnet Mask Define Valid Host IDs for Each Subnet Based on the Subnet ID Table 1 : Class B subnet masks Table 2 : Class C subnet masks

16 Calculating IPv4 Subnets Formula for determining how to modify a default subnet mask: 2n- 2=Y –n = number of bits in subnet mask that must be switched from 0 to 1 –Y = number of subnets that result Extended network prefix: Additional bits used for subnet information plus existing network ID Class A, Class B, and Class C networks –Can be subnetted Each class has different number of host information bits usable for subnet information Varies depending on network class and the way subnetting is used LAN subnetting –LAN’s devices interpret device subnetting information –External routers Need network portion of device IP address

17 Defining Subnet IDs 255 2240 1 1 1 1 1 1 1 0 0 0 0 00 0 0 0 00000000 = 0 00100000 = 32 01000000 = 64 01100000 = 96 10000000 = 128 10100000 = 160 11000000 = 192 11100000 = 224 1 1 2 2 3 3 Address Ranges Demo Solutions for Ranges Demo

18 Shortcut to Defining Subnet IDs List the Number of Bits (High Order) Used for Subnet Mask Convert the Bit with the Lowest Value to Decimal Increment the Value for Each Bit Combination 11000000 64 0 + 64 = 64 + 64 = 128 + 64 192 w.x.64.1w.x.127.254 w.x.128.1w.x.191.254 1 1 2 2 3 3

19 Defining Host IDs for a Subnet Subnet IDs Host ID Range Invalid x.y.32.1 – x.y.63.254 x.y.64.1 – x.y.95.254 x.y.96.1 – x.y.127.254 x.y.128.1 – x.y.159.254 x.y.160.1 – x.y.191.254 x.y.192.1 – x.y.223.254 Invalid x.y.32.1 – x.y.63.254 x.y.64.1 – x.y.95.254 x.y.96.1 – x.y.127.254 x.y.128.1 – x.y.159.254 x.y.160.1 – x.y.191.254 x.y.192.1 – x.y.223.254 Invalid 00000000 = 0 00100000 = 32 01000000 = 64 01100000 = 96 10000000 = 128 10100000 = 160 11000000 = 192 11100000 = 224 00000000 = 0 00100000 = 32 01000000 = 64 01100000 = 96 10000000 = 128 10100000 = 160 11000000 = 192 11100000 = 224 Each Subnet ID Indicates the Beginning Value in a Range The Ending Value Is One Less Than the Beginning Value of the Next Subnet ID

20 Calculating Subnets Practice 1 Demo Solutions for Practice 1 Demo Practice 2 Demo Solutions for Practice 2 Demo A router connecting several subnets

21 CIDR (Classless Interdomain Routing) Also called classless routing or supernetting Provides additional ways of arranging network and host information in an IP address Not exclusive of subnetting –Provides additional ways of arranging network and host information in an IP address –Conventional network class distinctions do not exist Supernet –Subnet created by moving subnet boundary left Classless Internet Domain Routing Demo

22 CIDR CIDR notation (or slash notation) –Shorthand denoting subnet boundary position –Form Network ID followed by forward slash ( / ), followed by number of bits used for extended network prefix –CIDR block Forward slash, plus number of bits used for extended network prefix Example: class C range of IPv4 addresses sharing network ID 199.34.89.0 –Need to greatly increase number of default host addresses Calculating a host’s network ID on a supernetted network Subnetting/Supernetting Demo

23 Internet Gateways Gateway –Combination of software and hardware –Facilitates communication between different networks, subnets Default gateway –Every device on a TCP/IP-based network has a default gateway –First interprets its outbound requests to other subnets –Then interprets its inbound requests from other subnets –Each node on network has one default gateway –May be network interface on a router Must maintain routing tables as well Core gateways make up the Internet backbone Network nodes – Allowed one default gateway Assigned manually, automatically (DHCP)

24 Internet Gateways Gateway interface on router –All data not meant for the local subnet is sent to this router –Advantages One router can supply multiple gateways Gateway assigned own IP address Default gateway connections –Multiple internal networks –Internal network with external networks WANs, Internet –Router used as gateway Must maintain routing tables The use of default gateways

25 Address Translation Public network –Any user may access Little or no restrictions Private network –Access restricted Clients, machines with proper credentials –Hiding IP addresses Provides more flexibility in assigning addresses NAT (Network Address Translation) –Gateway replaces client’s private IP address with Internet- recognized IP address Reasons for using address translation –Overcome IPv4 address quantity limitations –Add marginal security to private network when connected to public network –Develop network addressing scheme NAT Demo

26 Address Translation SNAT (Static Network Address Translation) –Client associated with one private IP address, one public IP address Never changes –Useful when operating mail server DNAT (Dynamic Network Address Translation) Also called IP masquerading Internet-valid IP address might be assigned to any client’s outgoing transmission

27 Address Translation PAT (Port Address Translation) –Each client session with server on Internet assigned separate TCP port number Client server request datagram contains port number –Internet server responds with datagram’s destination address including same port number NAT –Separates private, public transmissions on TCP/IP network Gateways conduct network translation –Most networks use router Gateway might operate on network host –Windows operating systems ICS (Internet Connection Sharing) Internet Connection Sharing Demo The Concepts of NAT & PAT Demo

28 TCP/IP Mail Services E-mail –Most frequently used Internet services –Functions Mail delivery, storage, pickup Mail servers –Communicate with other mail servers –Deliver messages, send, receive, store messages Mail clients –Send messages to; retrieve messages from mail servers

29 SMTP (Simple Mail Transfer Protocol) Protocol responsible for moving messages –From one mail server to another Over TCP/IP-based networks Operates at Application layer –Relies on TCP at Transport layer Operates from port 25 Provides basis for Internet e-mail service –Relies on higher-level programs for its instructions Services provide friendly, sophisticated mail interfaces Simple subprotocol –Transports mail, holds it in a queue Client e-mail configuration –Identify user’s SMTP server Use DNS: Identify name only –No port definition Client workstation, server assume port 25

30 MIME (Multipurpose Internet Mail Extensions) SMTP drawback: 1000 ASCII character limit MIME standard encodes, interprets binary files, images, video, non-ASCII character sets within e-mail message –Identifies each mail message element according to content type Text, graphics, audio, video, multipart Does not replace SMTP –Works in conjunction with it Encodes different content types –Fools SMTP

31 POP (Post Office Protocol) Application layer protocol –Retrieve messages from mail server POP3 (Post Office Protocol, version 3) –Current, popular version –Relies on TCP, operates over port 110 –Store-and-forward type of service Advantages –Minimizes server resources Mail deleted from server after retrieval Disadvantage for mobile users –Mail server, client applications support POP3

32 IMAP (Internet Message Access Protocol) More sophisticated alternative to POP3 IMAP4: current version Advantages –Replace POP3 without having to change e-mail programs –E-mail stays on server after retrieval Good for mobile users Features –Users can retrieve all or portion of mail message –Users can review messages and delete them While messages remain on server –Users can create sophisticated methods of organizing messages on server –Users can share mailbox in central location Disadvantages –Requires more storage space, processing resources than POP servers –Network managers must watch user allocations closely –IMAP4 server failure Users cannot access mail

33 Additional TCP/IP Utilities TCP/IP transmission process –Many points of failure Increase with network size, distance TCP/IP comes with complete set of utilities that can help to track down most TCP/IP-related problems –Help discover information about node, network –e.g., Ping, Telnet, ARP Nearly all TCP/IP utilities can be accessed from command prompt on any type of server or client running TCP/IP –Syntax may differ depending on OS –Options may differ according to OS

34 Ipconfig TCP/IP administration utility for use with Windows NT, 2000, XP, and Server 2003 OSs –Provides information about network adapter’s IP address, subnet mask, and default gateway Commonly used switches: –/? displays list of available switches –/all displays complete TCP/IP configuration information for each network interface on device –/release releases DHCP-assigned addresses for all network interfaces –/renew renews DHCP-assigned addresses for all network interfaces IPConfig, Ifconfig, Winipcfg Demo

35 Ifconfig Utility used on UNIX and Linux systems –Modify TCP/IP network interface settings, release and renew DHCP- assigned addresses, check TCP/IP setting status –Runs at UNIX, Linux system starts Establishes computer TCP/IP configuration Used alone or with switches –Uses hyphen ( - ) before some switches –No preceding character for other switches Detailed information available through ifconfig

36 Netstat Displays TCP/IP statistics and details about TCP/IP components and connections on a host –Port on which a particular TCP/IP service is running –Network connections currently established –Number of packets handled by network interface since activation –Number of data errors NETSTAT Demo

37 Nbtstat NetBIOS –Protocol runs in Session and Transport layers –Associates NetBIOS names with workstations –Not routable Can be made routable by encapsulation Nbtstat utility –Provides information about NetBIOS statistics –Resolves NetBIOS names to IP addresses –Useful on Windows-based operating systems and NetBIOS Limited use as TCP/IP diagnostic utility NBTSTAT Demo

38 Hostname, Host Hostname utility –Provides client’s host name Administrator may change Host utility –Learn IP address from host name –No switches: returns host IP address or host name

39 Nslookup Query DNS database from any network computer and find host name of a device by specifying its IP address, or vice versa –Provides host’s IP address, primary DNS server name, and address holding record for this name –Many options (switches) –Verify host configured correctly; troubleshoot DNS resolution problems Using NSLOOKUP Demo

40 Dig Using DIG in Unix Demo Domain information groper Similar to nslookup –Query DNS database –Find specific IP address host name Useful for diagnosing DNS problems Dig utility provides more detailed information than nslookup Flexible: two dozen switches Included with UNIX, Linux operating systems Windows system: must obtain third party code

41 Dig Output of a simple dig command

42 Whois Query DNS registration database and obtain information about a domain Troubleshoot network problems Syntax –whois xxx.yy xxx.yy is second-level domain name –Who is domain registered to? –Technical person responsible for domain? –Hosting entity? –DNS Server addresses? Must install software to use on Windows systems Web-based alternatives exist –e.g., www.arin.net WHOIS Demo

43 Traceroute (Tracert) Windows-based systems: tracert Linux systems: tracepath Uses ICMP to trace path from one node to another –Identifies all intermediate hops –Useful for determining router or subnet connectivity problems –Transmits series of UDP datagrams to specified destination –Using either IP address or host name To identify destination Increases TTL as path is discovered Traceroute may stop before completing –Device problem on path –Device does not accept ICMP transmissions Often indicates firewall Using TraceRT Demo

44 Mtr (my traceroute) UNIX, Linux operating systems –Route discovery, analysis utility –Combines ping, traceroute functions Output: easy-to-read chart Simplest form –mtr ip_address or mtr host_name Run continuously Stop with Ctrl+C or add limiting option to command Number of switches refine functioning, output Results misleading –If devices prevented from responding to ICMP traffic

45 Mtr (my traceroute) Windows XP, Vista, Server 2003, Server 2008 –Pathping program as command-line utility –Simile switches as mtr –Pathping output differs slightly Displays path first Then issues hundreds of ICMP ECHO requests before revealing reply, packet loss statistics

46 Route Route utility –Allows viewing of host’s routing table UNIX or Linux system –Type route and press Enter Windows-based system –Type route print and press Enter Cisco-brand router –Type show ip route and press Enter Route command –Add, delete, modify routes Route command help –UNIX or Linux system Type man route and press Enter –Windows system Type route ? and press Enter The Route Command Demo

47 Summary This chapter covered: –Designing TCP/IP-Based Networks –Subnetting –CIDR –Internet gateways –Address translation –TCP mail services –Utility commands

48 The End


Download ppt "CIS 1140 Network Fundamentals Chapter 10 – In Depth TCP/IP Networking Collected and Compiled By JD Willard MCSE, MCSA, Network+, Microsoft IT Academy Administrator."

Similar presentations


Ads by Google