1. Manufacturer of Specialty Integration Cameras and Camera Control Systems September 2005 Product Overview

2. EZCamera™ Cable System Power, Video & RS-232 Control Over CAT 5 Complete Installation Kit

3. WallVIEW™ 100 PTZ Camera System (10X Optical Zoom) WallVIEW™ 70 PTZ Camera System (18X Optical Zoom) WallVIEW™ PTZ Camera Series

4. WallVIEW ™ 300 PTZ Camera System (12X Optical Zoom) WallVIEW ™ 50i PTZ Camera System (26X Optical Zoom)

5. WallVIEW™ 50i PTZ HideAway

6. CeilingVIEW™ PTZ Camera Series CeilingVIEW™ 70 PTZ Camera System CeilingVIEW™ 50iR PTZ Camera System

7. CeilingVIEW™ 70 PTZ HideAway

8. Ceiling-Mounted Visualizers CeilingVIEW™ Visualizer (1 CCD) CeilingVIEW™ MegaPro Mega-Pixel Visualizer (3 CCD)

9. In-Wall Camera Covers CoverVIEW™ for Canon VC-C50i CoverVIEW™ for Sony EVI-D100

10. Video, Power & Control Wiring Center Quick-Connect 4 for Vaddio EZCamera™ Cabling Systems 1 Power Supply for 4 Cameras Selectable 15v or 18v Power Supply Centralized RS-232 Control Professional Installation

11. TrackVIEW The Vaddio TrackVIEW Camera Control System is a presenter control system that incorporates camera tracking and video preset camera control into one system.

12. TrackVIEW

13. How does it Track me? Tracking is performed by the use of a reference camera that provides a baseline image to our Video Motion Processor This constant image bitmap monitors any changes to any of pixels in the bitmap When a pixel bitmap change occurs those changes are sent to our camera control processor which then sends out the appropriate move command to the camera

14. Why would you use tracking and pre-set camera control together? The basic system design incorporates camera tracking into Vaddio’s pre-set camera control technology. This allows the presenter to stay on camera as they walk between pre-set video camera shots The net effect is that the presenter gets nice tight pre- determined camera shots at the main presentation areas and yet stays on camera when they move to another area

15. What Cameras can you use? Each TrackVIEW system comes with a Sony EVI-D70 equipped with a wide angle lens to use as the reference camera For the Tracking camera you can use either the Sony EVI-D70 /EVI-D100 / BRC-300 and the Canon VC-C50i / VC-C50iR

16. Pre-set camera triggers StepVIEW, AutoVIEW IR, and any other type of contact closure device can be connected to TrackVIEW. Power for the AutoVIEW IR is now incorporated into the system and replaces the need for a Vaddio control expander. ControlVIEW Xtreme/ProductionVIEW camera control systems can be added to the system. These add classroom control triggering to devices such as Microphones and TouchVIEW buttons so that you can automate student cameras into your system design

17. Pre-set camera triggers StepVIEW, AutoVIEW IR, and any other type of contact closure device can be connected to TrackVIEW. Power for the AutoVIEW IR is now incorporated into the system and replaces the need for a Vaddio control expander. ControlVIEW Xtreme/ProductionVIEW camera control systems can be added to the system. These add classroom control triggering to devices such as Microphones and TouchVIEW buttons so that you can automate student cameras into your system design

18. TrackVIEW Features Motion Tracking or Preset Tracking or Both The system uses motion-tracking technology with Vaddio’s preset camera control technology. This combination of technologies when on, allows the presenter to stay on camera as they walk between preset camera shots. Motion tracking can be disabled providing for only triggered preset tracking and preset tracking can be disabled allowing for only motion tracking.

19. TrackVIEW Features First Step, Last Step and Multi-Step Modes First Step - The first IR sensor or mat to be triggered will hold the camera preset Last Step - The last IR sensor or mat triggered will hold the camera preset Multi-Step - 2 mats or IR zones, or combination, triggered concurrently triggers a user defined 3 rd preset. Up to 10 presets are available for combined pre-set configurations

20. TrackVIEW Features Built-in EZCamera Cabling System The system has built-in EZCable System for running power and video over a single Cat. 5 cable. You no longer need Quick Connect Boxes to connect the cameras to the system. These support all Sony and Canon cameras except when using the BRC-300 as the Tracking camera, then the external Quick- Connect box and camera shoe is required.

21. TrackVIEW Features Tracking Camera Preset The tracking camera pre-set is a user definable pre- set camera view that is activated when the system goes into a tracking mode. This pre-set sets the zoom and the tilt of the tracking camera,so that when the tracking is enabled the camera’s zoom and tilt will be at a pre-assigned position.

22. TrackVIEW Features Additional Features RS 232 Control for AMX/Crestron RS 232 control port for ControlVIEW Xtreme IR Remote Control USB System Setup port Dual Camera Mounting system

23. 2-Model 70 Cameras with EZCamera Cabling Shoes and Dual 70/70 Mount TrackVIEW 2-StepVIEW Locator Mats S-Video Output Main Video Destination (Monitor, Codec, Modulator etc…) 2-Cat 5 Cables (Video/Power and Control) TrackVIEW Triggers 1-AutoVIEW Active IR Sensor 2-Cat 5 Cables (Video/Power and Control) TrackVIEW 70 System

24. Integrated with ControlVIEW Xtreme, WallVIEW, Quick-Connect 4 and MicVIEW TrackVIEW Triggers 2-StepVIEW Locator Mats 1-AutoVIEW Active IR Sensor TrackVIEW 2-Cat 5 Cables (Video/Power and Control) 2-Model 70 Cameras with EZCamera Cabling Shoes and Dual 70/70 Mount Main Video Destination (Monitor, Codec, Modulator, Audio system etc…) Cat. 5 Cables RS-232 Control Daisy Chain 2-WallVIEW 100 PTZ & 1-WallVIEW 70 PTZ Quick-Connect 4 ControlVIEW Xtreme S-Video Audio Triggers Up to 12 Total Push to Talk AT Mics Up to 12 Total Mic Cables S-Video 2-Wire Triggers S-Video 2-Cat 5 Cables (Video/Power and Control) Cat 5 Cables (Video/Power) MicVIEW RS-232

25. Presenter-Controlled Camera Systems Automatic Presenter Tracking ControlVIEW™ Xtreme PTZ Camera Control System 4 Cameras, 72 Pre-Set Positions For Use with Microphones and/or Presenter Location Systems

26. Presenter Location Systems StepVIEW™ Presenter’s Camera Location System E xposed Mats → Above-the-Carpet Concealed Mats Under-the-Carpet (Not Shown)

27. Presenter Location Systems AutoVIEW™ IR Presenter’s Camera Control System Ceiling-Mounted Active IR Sensor Presence-Sensing Adjustable Zone “Invisible” Mat

28. Presenter Location Systems TouchVIEW™ Wireless Remote Control System 4 Buttons per Receiver Expand with Additional Buttons & Receivers

29. Camera-Controlled Microphone Systems MicVIEW™ Teleconference Microphone Switcher 12 Mics per Box, Expandable to 8 Boxes with 96 Mics Push-to-Talk, Voice-Activated & Instructor-Priority Modes

30. Operator-Controlled Camera Systems Manual Camera Control ProductionVIEW™ Joystick – Preview Monitor – 6x2 Video Switcher 6 Cameras, 12 Pre-Sets Per Camera Includes Automated Control Functionality

31. StreamVIEW AV Server

33. Operator-Controlled Camera Systems Vaddio/Sony® Joystick Control Bundle VISCA PTZ Camera Controller with Custom VISCA Control Cable and Video Switcher Cable

34. Integrator-Friendly Solutions for a Variety of Audio Visual & Video Conferencing Applications ControlVIEW Xtreme VISCA Compatible Camera TouchVIEW MicVIEW or 3 rd Party Mixer StepVIEW AutoVIEW IR Room Controller Connect To Codec

35. TrackVIEW Triggers 2-StepVIEW Locator Mats 1-AutoVIEW Active IR Sensor TrackVIEW 2-Cat 5 Cables (Video/Power and Control) 2-Model 70 Cameras with EZCamera Cabling Shoes and Dual 70/70 Mount Main Video Destination (Monitor, Codec, Modulator, Audio system etc…) RS-232 Control Discrete Control Channels 2-WallVIEW 100 PTZ & 1-WallVIEW 70 PTZ Quick-Connect 4 ProductionVIEW S-Video Audio Triggers Up to 12 Total Push to Talk AT Mics Up to 12 Total Mic Cables S-Video 2-Wire Triggers S-Video 2-Cat 5 Cables (Video/Power and Control) MicVIEW Cat 5 Cables 2-per Camera (Video/Power & Control) TrackVIEW 70 System Integrated with ProductionVIEW, WallVIEW, Quick-Connect 4 and MicVIEW