Presentation is loading. Please wait.

Presentation is loading. Please wait.

STANDARD OPERATING PROCEDURES (SOP’s)

Similar presentations


Presentation on theme: "STANDARD OPERATING PROCEDURES (SOP’s)"— Presentation transcript:

1 STANDARD OPERATING PROCEDURES (SOP’s)
How to write STANDARD OPERATING PROCEDURES (SOP’s)

2 STANDARD OPERATING PROCEDURES
• Definition: A standard operating procedures (SOP) is set of written procedures explaining how to safely work with hazardous chemicals. • Why SOP's Are Required: In order to ensure the safety of all members of the lab and to make the Laboratory and Research Safety Plan a legal document, principal investigators must add laboratory specific procedures to the plan. • When SOP's Are Required: SOP's are required additions to the Laboratory and Research Safety Plan in any laboratory engaging in activities not otherwise covered by the Plan.

3 GUIDELINES FOR PREPARING SOP's

4 Three methods that can be used to write SOP's:
• By Process: (distillation, synthesis, chromatography, etc.) • By Individual Hazardous Chemical: (arsenic, benzene, hydrochloric acid, etc.) • By Hazardous Chemical Class: (flammable, corrosive, oxidizer, etc.)

5 Section 1: Determine the appropriate method:
• Process (i.e. distillation, synthesis, chromatography, etc.) • Hazardous Chemical (i.e. arsenic, benzene, hydrochloric acid, etc.) • Hazard Class (i.e. flammable, corrosive, oxidizer, etc.)

6 Section 2: Describe Process, Hazardous Chemical, or Hazard Class
Process ‐ Describe the process which involves hazardous chemicals. List all chemicals used in the process. Hazardous Chemical ‐ Name the hazardous chemical for which the SOP is being developed. Include IUPAC (International Union of Pure and Applied Chemistry), common name, and any abbreviation(s) used for the chemical. Hazard Class ‐ Describe the hazard associated with a particular group of similar chemicals and list the chemicals used in the laboratory.

7 Section 3: Potential Hazards
Describe the potential hazards for each process, hazardous chemical, or hazard class. Include physical and health hazards. Such as fire, explosion, burns to the skin, toxic fume generation, absorption through the skin, or cancer suspect.

8 Section 4: Personal Protective Equipment (PPE)
• Identify the required level of personal protective equipment and hygiene practices needed for each process, hazardous chemical, or hazard class. • Eye protection must be made available to all employees and visitors to the lab. Skin and body protection involves the use of PPE to protect against chemical exposure. • Personal protective equipment includes (but is not limited to): gloves, aprons, lab coats, safety glasses, chemical splash goggles and face‐shields.

9 Section 5: Engineering Controls
Describe engineering controls that will be used to prevent or reduce employee exposure to hazardous chemicals for the process, hazardous chemical, or hazard class. This includes ventilation devices such as fume hoods, glove boxes, etc.

10 Section 6: Special Handling & Storage Requirements
List storage requirements for the hazardous chemicals involved in the SOP, including specific storage areas, storage according to compatibility and policies regarding access to chemicals. Special procedures such as dating peroxide forming chemicals upon receipt, and opening and testing for peroxide formation after the appropriate date (i.e. diethyl ether).

11 Section 7: Spill and Accident Procedures
* 07/16/96 Section 7: Spill and Accident Procedures Indicate how spills or accidental releases will be handled and by whom. List the location of appropriate emergency equipment (spill kits, showers, eye washes, and fire equipment). Any special requirements for personnel exposure should also be identified in this section. Identify the location of emergency response phone numbers. *

12 Section 8: Decontamination Procedures
If items such as glove boxes, hoods, lab benches and controlled areas have been contaminated by hazardous chemicals, remove chemical contaminants with appropriate solvents or cleaning solutions.

13 Section 9: Waste Disposal Procedures
Indicate which materials or substances will require disposal as hazardous waste. Each container of hazardous waste must be labeled with a completed red waste tag attached. Red Tags are available through EHS.

14 Section 10: Material Safety Data Sheet Location
MSDS's are available from the EHS website, by googling the chemical name online, or by contacting EHS. Also, indicate the location of other pertinent safety information, i.e. equipment manuals, chemical references, etc.

15 Section 11: Protocol(s) Insert a copy of your specific laboratory procedures for working with this particular process, hazardous chemical or hazard class.

16 HYDOFLUORIC ACID

17

18

19 Hydrofluoric Acid SOP

20 Section 1: HAZARD CLASS Hydrofluoric acid (HF) 70% and diluted solutions. DANGER, strong corrosive, highly toxic, acutely toxic.

21 Section 2: DESCRIBE PROCESS, HAZARDOUS CHEMICAL OR HAZARD CLASS
Mineral digestion, surface cleaning, etching and biological staining.

22 Section 3: POTENTIAL HAZARDS
Extremely corrosive and destructive to tissue. specialized medical treatment is required for all exposures. May be fatal if inhaled, absorbed through skin, or swallowed. May cause depletion of calcium in the body which may be fatal. Skin contact results in painful deep‐seated burns that are slow to heal. Far more care is needed with HF than other acids.

23 Section 4: PERSONAL PROTECTIVE EQUIPMENT
Chemical splash goggles, thick neoprene chemical resistant gloves and lab coat. Thick neoprene gloves, lab coat, neoprene apron, chemical splash goggles and a face shield should be used for handling quantities over 1 pint.

24 Section 5: ENGINEERING or VENTILATION CONTROLS
Handle HF solutions in a fume hood or use other suitable local exhaust.

25 Section 6: SPECIAL HANDLING PROCEDURES & STORAGE REQUIREMENTS
Extreme care must be taken to prevent conditions that would lead to spills or splashes of hydrofluoric acid. Make everyone who handles or uses HF aware of its properties and dangers. Train everyone who uses HF in proper handling and safety precautions. Utilize all appropriate engineering controls, and making sure that the controls are maintained and functioning properly. Require everyone who handles HF to have the proper safety and personal protective equipment. Arrange ahead of time to provide first aid or medical treatment measures if necessary. Store hydrofluoric acid in a secondary polyethylene container. Hydrofluoric acid can be stored with other mineral acids. Glass and silicate‐containing materials are attacked by hydrofluoric acid. Hydrofluoric acid reacts with metal to produce flammable hydrogen gas.

26 Section 7: SPILL AND ACCIDENT PROCEDURES
Plan first aid action before beginning work with this product. Always have on hand a first aid kit containing 2.5 % calcium gluconate gel. For any splash to skin, eyes or inhalation, call 911 immediately. Under spcc regs oil is defined as oil of any kind or in any form including petroleum, ful oil, sludge, oil refuse and iol mixed with wastes other than dredged spoil and oily mixtures. This also includes animal and vegetable oils.

27 Section 7: SPILL AND ACCIDENT PROCEDURES
Skin Contact Limit washing to 5 minutes if treatment specific for HF exposure is available. Remove all contaminated clothing while washing continuously. After thorough washing for at least 5 minutes, 2.5% calcium gluconate gel may be continuously massaged into the burn area until the pain is relieved. Get medical attention immediately by calling 911.

28 Section 7: SPILL AND ACCIDENT PROCEDURES
Eye Contact Irrigate eyes for at least 15 minutes with copious quantities of water, keeping eyelids apart and away from eyeballs during irrigation. Get medical attention immediately by calling 911.

29 Section 7: SPILL AND ACCIDENT PROCEDURES
Inhalation Remove to fresh air. Keep patient warm and at rest. Get medical attention immediately by calling 911. If breathing has stopped, start artificial respiration at once.

30 Section 8: DECONTAMINATION PROCEDURES
Neutralize any contaminated surfaces or equipment with sodium bicarbonate solution.

31 Section 9: WASTE DISPOSAL PROCEDURES
Collect waste in original plastic shipping container or in suitable plastic (polyethylene) waste container. Do not use glass or metal containers. If possible, do not mix with other waste materials.

32

33

34 Section 10: MSDS LOCATION
documents/MSDS_HF_70_V1_technical_doc.pdf Laboratory Chemical Safety Summary: Hydrogen Fluoride and Hydrofluoric Acid Recommended Medical Treatment for Hydrofluoric Acid Exposure


Download ppt "STANDARD OPERATING PROCEDURES (SOP’s)"

Similar presentations


Ads by Google