Download presentation
1
CERAMICS MATERIALS
2
CERAMICS MATERIALS Ceramic materials are inorganic materials consisting of metallic and non-metallic elements chemically bonded together to form complex compounds. Ceramic materials are usually ionic or covalently-bonded materials, and can be crystalline or amorphous. Important examples: Silica - silicon dioxide (SiO2), the main ingredient in most glass products Alumina - aluminum oxide (Al2O3), used in various applications from abrasives to artificial bones More complex compounds such as hydrous aluminum silicate (Al2Si2O5(OH)4), the main ingredient in most clay products
3
CERAMICS MATERIALS Properties and applications of Ceramics Traditional Ceramics New Ceramics Glass Some Important Elements Related to Ceramics Guide to Processing Ceramics Traditional ceramics ‑ clay products such as pottery and bricks, common abrasives, and cement New ceramics ‑ more recently developed ceramics based on oxides, carbides, etc., and generally possessing mechanical or physical properties superior or unique compared to traditional ceramics Glasses ‑ based primarily on silica and distinguished by their noncrystalline structure In addition, glass ceramics ‑ glasses transformed into a largely crystalline structure by heat treatment
4
CERAMICS MATERIALS Ceramics properties High hardness, (high strength, stiffness, wear resistance) Brittle, Low ductility or malleability i.e. low plasticity, Electrical and thermal insulating, Chemical stability, and high melting temperatures Some ceramics are translucent, window glass (based on silica). Lower density than most metals, Low resistance to fracture, highly resistant to compressive loads. Corrosion resistance Ceramics are hard, brittle, totally elastic and are heat resistant. At extremely low temperature, exhibit superconductivity. Due to high resistance to heat, application in furnace linings. Ceramics are often used as protective coatings to other materials.
5
CERAMICS MATERIALS Applications of Ceramics
Electrical Ceramics, insulators, electrical devices, Superconductors. Coatings, Biocompatible coatings (fusion to bone), Self-lubricating bearings Abrasives Piezoelectric materials are lead zirconate titanate and barium titanate. Design of high-frequency loudspeakers, Transducers for sonar, and Actuators for atomic force and scanning tunneling microscopes. Semiconducting ceramics are also employed as gas sensors. Corrosion resistant applications, Windows, Television screens, Magnetic materials (audio/video tapes, disks, etc.), Magnets. Ceramic fibers, graphite and aluminum oxide, fiber-reinforced composites Pottery, clay, glasses, vitreous enamels, and Cutting tools. Chemically Bonded Ceramics (e.g. cement and concrete) Structural Ceramics, Whitewares (e.g. porcelains), Engineering ceramics 1- Oxides (SiO2, Al2O3, Fe 2O3, MgO, SrTiO3, MgAl2O4, YBa2Cu3O7-x) 2- Carbides (SiC, WC, TiC), Borides, Nitrides (Si3N4, TiN, AlN, GaN, BN), 3- Composites: Particulate reinforced
6
CERAMICS MATERIALS Clay construction products - bricks, clay pipe, and building tile Refractory ceramics ‑ ceramics capable of high temperature applications such as furnace walls, crucibles, and molds Cement used in concrete - used for construction and roads Whiteware products - pottery, stoneware, fine china, porcelain, and other tableware, based on mixtures of clay and other minerals Glass ‑ bottles, glasses, lenses, window pane, and light bulbs Glass fibers - thermal insulating wool, reinforced plastics (fiberglass), and fiber optics communications lines Abrasives - aluminum oxide and silicon carbide Cutting tool materials - tungsten carbide, aluminum oxide, and cubic boron nitride Ceramic insulators ‑ applications include electrical transmission components, spark plugs, and microelectronic chip substrates Magnetic ceramics – example: computer memories Nuclear fuels based on uranium oxide (UO2) Bioceramics - artificial teeth and bones
7
CERAMICS MATERIALS Advanced Ceramics: Sensors, Valves, Dielectrics, Space shuttle, Spark plugs, Magnetic recording media, Glasses: Optical Composite, Porous ceramic tiles Cements: Composites structural Clay: Whiteware Bricks Refractories: Bricks for high T Abrasives: Sandpaper Polishing Heat Engines Excellent wear & corrosion resistance Low frictional losses Heat resistant Low density Brittle, Difficult to Machine Si3N4, SiC, & ZrO2 Ceramic Armor Al2O3, B4C, SiC & TiB2 Hard materials Electronic Packaging Boron nitride (BN) Silicon Carbide (SiC) Aluminum nitride (AlN Good expansion Good heat transfer coefficient Poor electrical Conductivity
8
CERAMICS MATERIALS Traditional Ceramics Primary products are fired clay (pottery, tableware, brick, and tile), cement, and natural abrasives such as alumina Glass is also a silicate ceramic material and is sometimes included among traditional ceramics Raw Materials for Traditional Ceramics Mineral silicates, such as clays of various compositions, and silica, such as quartz, are among the most abundant substances in nature and constitute the principal raw materials for traditional ceramics Another important raw material for traditional ceramics is alumina
9
CERAMICS MATERIALS Clay and Silica as a Ceramic Raw Material Clays consist of fine particles of hydrous aluminum silicate, Most common clays are based on the mineral kaolinite, (Al2Si2O5(OH)4) When mixed with water, clay becomes a plastic substance that is formable and moldable. When heated to a sufficiently elevated temperature (firing ), clay fuses into a dense, strong material. Thus, clay can be shaped while wet and soft, and then fired to obtain the final hard product Silica is available naturally in various forms, most important is quartz, the main source of quartz is sandstone, Low in cost; also hard and chemically stable Principal component in glass, and an important ingredient in other ceramic products including whiteware, refractories, and abrasives
10
CERAMICS MATERIALS Alumina as a Ceramic Raw Material Bauxite - most alumina is processed from this mineral, which is an impure mixture of hydrous aluminum oxide and aluminum hydroxide plus similar compounds of iron or manganese. Bauxite is also the principal source of metallic aluminum Corundum - a more pure but less common form of Al2O3, which contains alumina in massive amounts Alumina ceramic is used as an abrasive in grinding wheels and as a refractory brick in furnaces Traditional Ceramic Products Pottery and Tableware Brick and tile Refractories Abrasives
11
CERAMICS MATERIALS New Ceramics Ceramic materials developed synthetically over the last several decades The term also refers to improvements in processing techniques that provide greater control over structures and properties of ceramic materials In general, new ceramics are based on compounds other than variations of aluminum silicate, which form most of the traditional ceramic materials New ceramics are usually simpler chemically than traditional ceramics; for example, oxides, carbides, nitrides, and borides Thin films of many complex and multi-component ceramics are produced using different techniques such as sputtering, sol-gel, and chemical-vapor deposition (CVD). Fibers are produced from ceramic materials for several uses: as a reinforcement in composite materials, for weaving into fabrics, or for use in fiber-optic systems.
12
CERAMICS MATERIALS Oxides Ex. Properties Aluminum oxide Al2O3
high strength and hardness, high stiffness, high thermal stability magnesium oxide MgO high thermal stability Mullite Al6Si2O13 Low coefficient of thermal expansion, high thermal stability silicon dioxide SiO2 Low density, transparency Zirconium dioxide ZrO2 high toughness when transformation toughened Carbides Ex Properties Diamond C high strength, stiffness, low coefficient of thermal expansion, Graphite high strength, stiffness, low coefficient of thermal expansion silicon carbide SiC high strength and hardness, high stiffness tungsten carbide WC high strength and hardness Nitrides Ex Properties Boron nitride BN very high strength and hardness, very high stiffness silicon nitride Si3N4 high strength, hardness, stiffness and high thermal stability
13
CERAMICS MATERIALS Oxide Ceramics
Most important oxide new ceramic is alumina Although also included as a traditional ceramic, alumina is today produced synthetically from bauxite, using an electric furnace method Through control of particle size and impurities, refinements in processing methods, and blending with small amounts of other ceramic ingredients, strength and toughness of alumina are improved substantially compared to its natural counterpart Alumina also has good hot hardness, low thermal conductivity, and good corrosion resistance Products of Oxide Ceramics Abrasives (grinding wheel grit) Bioceramics (artificial bones and teeth) Electrical insulators and electronic components Refractory brick Cutting tool inserts Spark plug barrels Engineering components
14
CERAMICS MATERIALS Carbides
Silicon carbide (SiC), tungsten carbide (WC), titanium carbide (TiC), tantalum carbide (TaC), and chromium carbide (Cr3C2) Although SiC is a man‑made ceramic, its production methods were developed a century ago, and it is generally included in traditional ceramics group WC, TiC, and TaC are valued for their hardness and wear resistance in cutting tools and other applications requiring these properties WC, TiC, and TaC must be combined with a metallic binder such as cobalt or nickel in order to fabricate a useful solid product Nitrides The important nitride ceramics are silicon nitride (Si3N4), boron nitride (BN), and titanium nitride (TiN) Properties: hard, brittle, high melting temperatures, usually electrically insulating, TiN being an exception Applications: Silicon nitride: components for gas turbines, rocket engines, and melting crucibles Boron nitride and titanium nitride: cutting tool material and coatings
15
CERAMICS MATERIALS Functional Classification of Ceramics
16
CERAMICS MATERIALS Functional Classification of Ceramics
17
CERAMICS MATERIALS Strength Properties of Ceramics
Theoretically, the strength of ceramics should be higher than metals because their covalent and ionic bonding types are stronger than metallic bonding However, metallic bonding allows for slip, the basic mechanism by which metals deform plastically when subjected to high stresses Bonding in ceramics is more rigid and does not permit slip under stress The inability to slip makes it much more difficult for ceramics to absorb stresses Imperfections in Crystal Structure of Ceramics Ceramics contain the same imperfections in their crystal structure as metals ‑ vacancies, displaced atoms, interstitialcies, and microscopic cracks Internal flaws tend to concentrate stresses, especially tensile, bending, or impact Hence, ceramics fail by brittle fracture much more readily than metals Performance is much less predictable due to random imperfections and processing variations
18
CERAMICS MATERIALS Compressive Strength of Ceramics Ceramics are substantially stronger in compression than in tension For engineering and structural applications, designers have learned to use ceramic components so that they are loaded in compression rather than tension or bending Methods to Strengthen Ceramic Materials Make starting materials more uniform Decrease grain size in polycrystalline ceramic products Minimize porosity Introduce compressive surface stresses Use fiber reinforcement Heat treat
19
CERAMICS MATERIALS Physical Properties of Ceramics Density – in general, ceramics are lighter than metals and heavier than polymers Melting temperatures - higher than for most metals Some ceramics decompose rather than melt Electrical and thermal conductivities - lower than for metals; but the range of values is greater, so some ceramics are insulators while others are conductors Thermal expansion - somewhat less than for metals, but effects are more damaging because of brittleness
20
CERAMICS MATERIALS Properties of Ceramics
21
Classification of ceramics into micro-structural terms
CERAMICS MATERIALS Classification of ceramics into micro-structural terms Single crystals of appreciable size (e.g. ruby laser crystals). Glass (non-crystalline) of appreciable size (e.g. sheets of float glass). Crystalline or glassy filaments. Polycrystalline aggregates bonded by a glassy matrix (e.g. porcelain pottery). Glass free polycrystalline aggregates (e.g. ultra pure, fine grained, zero porosity forms of alumina, magnesia, and beryllia). Polycrystalline aggregates produced by heating glasses of special composition (e.g. glass-ceramics). Composites (e.g. silicon carbide or carbon filaments in a matrix of glass or glass-ceramic; magnesia graphite refractories, concrete).
22
CERAMICS MATERIALS Glass
As a state of matter, the term refers to an amorphous (noncrystalline) structure of a solid material The glassy state occurs in a material when insufficient time is allowed during cooling from the molten state for the crystalline structure to form As a type of ceramic, glass is an inorganic, nonmetallic compound (or mixture of compounds) that cools to a rigid condition without crystallizing Because SiO2 is the best glass former Silica is the main component in glass products, usually comprising 50% to 75% of total chemistry It naturally transforms into a glassy state upon cooling from the liquid, whereas most ceramics crystallize upon solidification
23
CERAMICS MATERIALS Glass temperature - The temperature below which an undercooled liquid becomes a glass. Glass formers - Oxides with a high-bond strength that easily produce a glass during processing. Intermediates - Oxides that, when added to a glass, help to extend the glassy network; although the oxides normally do not form a glass themselves. Glass modifier – • Glasses: -- do not crystallize -- change in slope in spec. vol. curve at glass transition temperature, Tg transparent Crystalline materials: -- crystallize at melting temp, Tm -- have abrupt change in spec. vol. at Tm
24
CERAMICS MATERIALS Specific volume Supercooled Liquid Liquid
(disordered) ©2003 Brooks/Cole, a division of Thomson Learning, Inc. Thomson Learning™ is a trademark used herein under license. Glass (amorphous solid) Crystalline (i.e., ordered) solid T T g T m When silica crystallizes on cooling, an abrupt change in the density is observed. For glassy silica, however, the change in slope at the glass temperature indicates the formation of a glass from the undercooled liquid. Glass does not have a fixed Tm or Tg. Crystalline materials have a fixed Tm and they do not have a Tg. Adapted from Fig. 13.6, Callister, 7e. Specific volume (1/r) vs Temperature (T)
25
CERAMICS MATERIALS ©2003 Brooks/Cole, a division of Thomson Learning, Inc. Thomson Learning™ is a trademark used herein under license. The effect of temperature and composition on the viscosity of glass.
26
CERAMICS MATERIALS
27
Sheet forming – continuous draw
CERAMICS MATERIALS Sheet forming – continuous draw originally sheet glass was made by “floating” glass on a pool of mercury Adapted from Fig. 13.9, Callister 7e.
28
CERAMICS MATERIALS Glass Products
©2003 Brooks/Cole, a division of Thomson Learning, Inc. Thomson Learning™ is a trademark used herein under license. Techniques for forming lass products: (a) pressing, (b) press and blow process, and (c) drawing of fibers. Glass Products Window glass, Containers – cups, jars, bottles, Light bulbs, Laboratory glassware – flasks, beakers, glass tubing, Glass fibers – insulation, fiber optics, Optical glasses - lenses
29
CERAMICS MATERIALS Glass‑Ceramics is a ceramic material produced by conversion of glass into a polycrystalline structure through heat treatment Proportion of crystalline phase range = 90% to 98%, remainder being unconverted vitreous material Grain size - usually between 0.1 ‑ 1.0 m (4 and 40 -in), significantly smaller than the grain size of conventional ceramics This fine crystal structure makes glass‑ceramics much stronger than the glasses from which they are derived Also, due to their crystal structure, glass‑ceramics are opaque (usually grey or white) rather than clear Processing of Glass Ceramics Heating and forming operations used in glass working create product shape Product is cooled and then reheated to cause a dense network of crystal nuclei to form throughout High density of nucleation sites inhibits grain growth, leading to fine grain size Nucleation results from small amounts of nucleating agents in the glass composition, such as TiO2, P2O5, and ZrO2 Once nucleation is started, heat treatment is continued at a higher temperature to cause growth of crystalline phases
30
CERAMICS MATERIALS Advantages of Glass‑Ceramics Efficiency of processing in the glassy state Close dimensional control over final product shape Good mechanical and physical properties High strength (stronger than glass) Absence of porosity; low thermal expansion High resistance to thermal shock Applications: Cooking ware Heat exchangers Missile radomes
31
CERAMICS MATERIALS Elements Related to Ceramics Carbon
Two alternative forms of engineering and commercial importance: graphite and diamond Silicon Boron Carbon, silicon, and boron are not ceramic materials, but they sometimes Compete for applications with ceramics Have important applications of their own Graphite Form of carbon with a high content of crystalline C in the form of layers Bonding between atoms in the layers is covalent and therefore strong, but the parallel layers are bonded to each other by weak van der Waals forces This structure makes graphite anisotropic; strength and other properties vary significantly with direction As a powder it is a lubricant, but in traditional solid form it is a refractory When formed into graphite fibers, it is a high strength structural material
32
CERAMICS MATERIALS Diamond is a carbon with a cubic crystalline structure with covalent bonding between atoms This accounts for high hardness Industrial applications: cutting tools and grinding wheels for machining hard, brittle materials, or materials that are very abrasive; also used in dressing tools to sharpen grinding wheels that consist of other abrasives Industrial or synthetic diamonds date back to 1950s and are fabricated by heating graphite to around 3000C (5400F) under very high pressures Boron is semi-metallic element in same periodic group as aluminum Comprises only about 0.001% of Earth's crust by weight, commonly occurring as minerals borax (Na2B4O7‑ 10H2O) and kernite (Na2B4O7‑4H2O) Properties: lightweight, semiconducting properties, and very stiff (high modulus of elasticity) in fiber form Applications: B2O3 used in certain glasses, as a nitride (cBN) for cutting tools, and in nearly pure form as a fiber in polymer matrix composites
33
CERAMICS MATERIALS Silicon is a semi-metallic element in the same periodic table group as carbon One of the most abundant elements in Earth's crust, comprising 26% by weight Occurs naturally only as chemical compound ‑ in rocks, sand, clay, and soil ‑ either as silicon dioxide or as more complex silicate compounds Properties: hard, brittle, lightweight, chemically inactive at room temperature, and classified as a semiconductor Applications and Importance of Silicon Greatest amounts in manufacturing are in ceramic compounds (SiO2 in glass and silicates in clays) and alloying elements in steel, aluminum, and copper Also used as a reducing agent in certain metallurgical processes Of significant technological importance is pure silicon as the base material in semiconductor manufacturing in electronics The vast majority of integrated circuits produced today are made from silicon
34
CERAMICS MATERIALS Processing of Advanced Ceramics
©2003 Brooks/Cole, a division of Thomson Learning, Inc. Thomson Learning™ is a trademark used herein under license. Different techniques for processing of advanced ceramics.
35
CERAMICS MATERIALS Schematic of the jaw, rotary, crushing rollers, and hammermill crushing equipment and ball mill (grinding) equipment. (Jaw, rotary, crushing, and hammermill: Source: From Principles of Ceramics Processing, Second Edition, by J.S. Reed, p. 314, Figs and Copyright © 1995 John Wiley & Sons, Inc. Reprinted by permission. Ball mill grinding: Source: From Modern Ceramic Engineering, by D.W. Richerson, p. 387, Fig Copyright © 1992 Marcel Dekker, Inc.)
36
CERAMICS MATERIALS ©2003 Brooks/Cole, a division of Thomson Learning, Inc. Thomson Learning™ is a trademark used herein under license. Processes for shaping crystalline ceramics: (a) pressing, (b) isostatic pressing, (c) extrusion, (d) jiggering, and (e) slip casting.
37
Guide to Processing Ceramics
CERAMICS MATERIALS Guide to Processing Ceramics Processing of ceramics can be divided into two basic categories: Molten ceramics - major category of molten ceramics is glassworking (solidification processes) Particulate ceramics - traditional and new ceramics (particulate processing)
38
Thin sheets of green ceramic cast as flexible tape
CERAMICS MATERIALS Tape Casting Thin sheets of green ceramic cast as flexible tape used for integrated circuits and capacitors cast from liquid slip (ceramic + organic solvent) Adapted from Fig , Callister 7e.
39
Hot pressing: Diffusion Processes during Sintering
CERAMICS MATERIALS Hot pressing: Diffusion Processes during Sintering 3 4 5 1 2 ©2003 Brooks/Cole, a division of Thomson Learning, Inc. Thomson Learning™ is a trademark used herein under license. Diffusion processes during sintering and powder metallurgy. Atoms diffuse to points of contact, creating bridges and reducing the pore size
40
Hot pressing: Diffusion Processes during Sintering 3 4 5 1 2
CERAMICS MATERIALS Hot pressing: Diffusion Processes during Sintering 3 4 5 1 2 1 ©2003 Brooks/Cole, a division of Thomson Learning, Inc. Thomson Learning™ is a trademark used herein under license. The steps in diffusion bonding: (a) Initially the contact area is small; (b) application of pressure deforms the surface, increasing the bonded area; (c) grain boundary diffusion permits voids to shrink; and (d) final elimination of the voids requires volume diffusion
41
CERAMICS MATERIALS ©2003 Brooks/Cole, a division of Thomson Learning, Inc. Thomson Learning™ is a trademark used herein under license. The change in the volume of a ceramic body as moisture is removed during drying. Dimensional changes cease after the interparticle water is gone.
42
CERAMICS MATERIALS ©2003 Brooks/Cole, a division of Thomson Learning, Inc. Thomson Learning™ is a trademark used herein under license. During firing, clay and other fluxing materials react with coarser particles to produce a glassy bond and reduce porosity.
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.