1. PRISHA PROPERTIES INDIA PVT LTD.
GREETINGS
Presentation On
GREEN PATH AHEAD
PRISHA PROPERTIES INDIA PVT LTD.

2. Growth in CO2 in the Atmosphere

3. Worldwide Energy Use

5. Green Building Defined
Incorporates several Green Features
Efficient Use of Water
Energy Efficient &
Eco Friendly Equipment
Use of Renewable Energy
Use of Recycled / Recyclable
Materials

6. Green Building Features
Effective Use of Landscaping
Effective Control & Building Management Systems
Improvement indoor air quality
for health and comfort

7. Green Building vs. Conventional Building
Externally : both look alike
Building Use : both are same
Differences
Concern for human comfort & indoor environment
Operational savings

8. Tangible Benefits Reduce operating costs Optimize life cycle
economic performance
Sustained saving
Energy savings:40-50%
Water savings :20-30%

9. Intangible Benefits of Green Design
Environmental benefits
Reduce impact on the
environment
Health and Safety Benefits
Enhance occupants comfort
Improve Productivity of
occupants
World class Standards & Procedures.

10. Economic Benefits Reduced operating costs Increased building valuation
Marketing advantages
Optimizes life-cycle economic performance
Improve productivity
Reduced absenteeism and turnover
Providing a healthy workplace improves employee satisfaction

11. LEED India Green Building Rating System
Points for individual Credits
S.No
Credits
New Building
Prerequisites 7 1
Sustainable Sites 13 2
Water Efficiency 6 3
Energy and Atmosphere 17 4
Materials and Resources 5
Indoor Environmental Quality 15
Innovation and Accredited Professional points
Total 69

12. Leadership in Energy & Environmental Design
LEED INDIA
Programs
LEED
for
New
Construction
LEED
for
Existing
Buildings
LEED
for
Factory Buildings
LEED
for
Core and
Shell
LEED
for
Homes
LEED
for
SEZ

13. LEED Rating Systems
LEED for New Construction: New construction and major renovations (the most commonly applied-for LEED certification)
LEED for Existing Buildings: Existing buildings seeking LEED certification
LEED for Core and Shell: Core-and-shell projects (total building minus tenant fit outs)
LEED for Homes: Homes
LEED for SEZ

14. LEED NC – Point Distribution
Water
Efficiency 7%
PLUS
Innovation
in Design
Process 7%
Energy &
Atmosphere
26%
Sustainable
Sites
20%
Indoor
Environmental
Quality
22%
Materials &
Resources
19%

15. Sustainable Sites Credit Title Points Total 13 Prereq 1
Erosion and Sedimentation Control
Required
Credit 1
Site Selection 1
Credit 2
Development Density & Community Connectivity
Credit 3
Brownfield Redevelopment
Credit 4
Alternative Transportation
1-3
Credit 5
Site Development
1-2
Credit 6
Storm Water Design
Credit 7
Heat Island Effect
Credit 8
Light Pollution Reduction
Total 13

16. Sustainable Sites
Erosion & Sedimentation Control – Taking measures to prevent soil erosion
Site Selection – Land shouldn't be a agricultural land
Development Density & Community Connectivity – It is required to have at least 10 basic services within 0.5mile radius
Brownfield Redevelopment – Rehabilitate waste land
Alternative Transportation – Public Transport Access
– Bicycle Use
– Alternate Fuel Vehicle
– Reduce parking capacity

17. Sustainable Sites Site Development – Protect or restore habitat
– Maximize Open space
Storm Water Design – Minimize storm water run-off
– Treat 90% of average rainfall
Heat Island Effect – Reduce heat islands on roof
– Reduce heat islands on non-roof
Light Pollution Reduction – Eliminate uplights and light trespass from the building site

18. Alternate Transportation

19. Green Roof

20. Water Efficiency
Water Efficient Landscaping – 50% reduction of potable water for irrigation
– 100% reduction of potable water for irrigation
Water Efficiency in A/C System – 50% reduction of potable water for A/C systems
Innovative Waste Water Technologies – Treat 50% waste water onsite to tertiary standards and used on-site
Water Use Reduction – 20% reduction by maximizing water efficiency
– 30 or 40 % reduction

21. Water Efficient

22. Energy & Atmosphere Credit Title Points Prereq 1
Fundamental Building Systems Commissioning
Required
Prereq 2
Minimum Energy Performance
Prereq 3
CFC Reduction in HVAC&R Equipment
Credit 1
Optimize Energy Performance
1-10
Credit 2
Renewable Energy
1-3
Credit 3
Additional Commissioning 1
Credit 4
Ozone Depletion
Credit 5
Measurement And Verification
Credit 6
Green Power
Total 13

23. Energy & Atmosphere
Fundamental Building System Commissioning – Ensure fundamental building elements are installed
Minimum Energy Performance – Establish minimum level of efficiency for base building and systems
Fundamental Refrigerant Management – CFC reduction in HVAC equipment
Optimize Energy Performance – Achieve increase in performance than the base case
Reduction in Design Energy cost (%)
Points 14 2
17.5 3 21 4
24.5 5 28 6
Reduction in Design Energy cost (%)
Points
31.5 7 35 8
38.5 9 42 10

24. Use of Renewable Energy
Energy & Atmosphere
On-Site Renewable Energy – Encourage on-site renewable energy to reduce environmental impact by fossil fuel
Additional Commissioning – Verification by a third party
Ozone Depletion – Avoid using HCFC refrigerants
Measurement & Verification, Base Building – Ongoing accountability of building energy consumption over time
Green Power – Encourage investments in off-site renewable energy
Use of Renewable Energy
Points
2.5 1
7.5 2
12.5 3

25. Energy Efficient Lighting

26. Solar Panels

27. Materials & Resources
Storage and Collection of Recyclables – Providing an area for collection of recyclables
Building Reuse – Maintain 75% of existing walls, floors and roof (Applicable only for redevelopment projects)
– Maintain 95% of existing walls, floors and roof
– Maintain 50% of interior non-structure elements
Construction Waste Management – Redirect 50% of recyclable and reusable materials to appropriate sites
– Redirect 75% of recyclable and reusable materials to appropriate sites
Material Reuse – Reuse 5% (by cost) of building materials and products to reduce demand for virgin materials
– Reuse 10% (by cost) of building materials and products to reduce demand for virgin materials

28. Materials & Resources
Recycled Content – Post consumer + ½ pre consumer = 10% cost
– Post consumer + ½ pre consumer = 20% cost
Regional Materials – 10% by cost of materials extracted, processed & manufactured regionally
– 20% by cost of materials extracted, processed & manufactured regionally
Rapidly Renewable Materials – 2.5% by cost of rapidly renewable materials (products made from plants)
Certified Wood – Using 50% of Forest Stewardship Council (FSC) certified woods

29. Recycling

30. Indoor Environmental Quality
Minimum IAQ Performance – Meeting the minimum ventilation rate as per ASHRAE
Environmental Tobacco Smoke Control – Prohibit smoking inside the building
Outdoor Air Delivery Monitoring – Monitor CO2 concentration in occupied spaces
Increased Ventilation – Increase air ventilation rates to all occupied spaces by atleast 30% above the minimum rate required by ASHRAE
Construction IAQ Management Plan – Reduce IAQ problems resulting from the construction/renovation process
– Reduce IAQ problems before occupancy

31. Indoor Environmental Quality
Low-Emitting Materials – Use low VOC Adhesives & Sealants
– Use low VOC Paints & Coatings
– Use low VOC Flooring systems
– Use low VOC Furniture
Indoor Chemical & Pollutant Source Control – Avoid exposure to use of potentially hazardous particulates & chemical pollutants
Controllability of a System – Individual lighting control for 90% of building occupants
– Individual thermal control for at least 50% of building occupants
Thermal Comfort – Provide thermal comfort to the occupant as per ASHRAE
– Monitor the thermal performance of the building within a period of 6 to 18 months after occupancy

32. Low Emitting Materials

33. Daylighting

34. Mold Prevention

35. Innovation & Design
Innovation in Design – Maximum 4 points will be awarded for exceptional performance above the requirements set by LEED for Schools Green Building Rating Systems
LEED Accredited Professional – At least one principal participant of the project team shall be a LEED Accredited Professional (AP)