1. TUSKER TRANSMISSION (M) SDN. BHD www.tuskertransbelt.com

2. About Us www.tuskertransbelt.com Tusker is the leading manufacturer of top quality industrial, automotive and agriculture application belts. 25 years of excellence in manufacturing drive belts including V and multi ribbed belts, cogged belts, space saver belts, fractional horse power belts and timing belts. Tusker transmission belts are made as per original equipment specifications conforming to international standards and are designed for long life. Pre- stretched polyester tension cords, fibre reinforced belt ensure low maintenance and lateral stiffness. Tusker has setup a State-of-the-art manufacturing plant in Malaysia exclusively cater to the high growth manufacturing sector as well as the industrial and agricultural sectors.

3. Industrial Classical V-Belts & FHP Belts Narrow (Wedge) belts Industrial Cogged Classical & Wedge Belts Multi-rib Industrial Micro Poly V-Belts Industrial cogged Power wedge belts Hexagonal & Banded Belts Double side Synchronous Belts Variable Speed Belts Automotive V& Cogged Belts Automotive Poly V Serpentine belts Timing belts Transmission Accessories Couplings & Elements

4. Features: o High efficiency of power transmission at variable speed changes o The strongly bonded reinforcement polyester cable cord and a specially treated high quality rubber o These belts meet the specification of ISO1604 and other to customers’ requirements Features: o High efficiency of power transmission at variable speed changes o The strongly bonded reinforcement polyester cable cord and a specially treated high quality rubber o These belts meet the specification of ISO1604 and other to customers’ requirements www.tuskertransbelt.com Top Width (mm) Thickness (mm) Angle (mm) 22.2822 30.21122 36.51222 46.01426 69.91730 Tusker Variable Speed Belts give superb resistance to section deviation while bending around small pulleys

5. Tusker Multi-rib/Poly-rib belt represents a new venture to transmit high power rating and efficiency www.tuskertransbelt.com Design Features: o Speed ratio up to 40:1, smoother, vibration free o Low static, noise free, high flexibility rubber o Reinforcement Polyester stiff cabled cord o Use of single belts eliminate the necessity to use multiple for matched set of belts Design Features: o Speed ratio up to 40:1, smoother, vibration free o Low static, noise free, high flexibility rubber o Reinforcement Polyester stiff cabled cord o Use of single belts eliminate the necessity to use multiple for matched set of belts ProfilePitch: P (mm) High of Rib (mm) PH1.61.1 PJ2.341.8 PK3.562.4 PL4.74.6 PM9.4 No. of RibsSection 6PK

6. Features: o Maximum resistance to slippage o The Cog design helps optimum flexibility & allows cool air between the pulleys o Raw edge Cogged automotive belts give higher belt life approximately 300% more than the wrapped belts Features: o Maximum resistance to slippage o The Cog design helps optimum flexibility & allows cool air between the pulleys o Raw edge Cogged automotive belts give higher belt life approximately 300% more than the wrapped belts Top Width (mm) Thickness (mm) Angle (mm) Range (0) 85.838450-2540 95.838450-2540 107.538450-2540 117.538450-2540 137.838450-2540 179.538450-2540 1910.538450-2540 2211.538450-2540 9.57.538450-2540 137.538450-2540 www.tuskertransbelt.com

7. Tusker Industrial raw edge belts are available with extraordinary oil & heat, vibration resistance and antistatic properties SectionCross Section Inside Length Pitch Length AX13 X 819 – 100520 - 2540 BX17 X 1120 – 100520 - 2540 CX22 X 1445 – 1001200 - 2540 www.tuskertransbelt.com Features: o High flexibility, low slippage and reduced hysteresis loss than wrapped belts o The mould cogged design of these belts run even in smaller pulley diameters and drive ratios up to 1:12 Features: o High flexibility, low slippage and reduced hysteresis loss than wrapped belts o The mould cogged design of these belts run even in smaller pulley diameters and drive ratios up to 1:12

8. Features: o Helps the pulleys to remain cool while running o Compact, economical and more efficient than the conventional belts o Resistant to oil & heat with very good antistatic properties Features: o Helps the pulleys to remain cool while running o Compact, economical and more efficient than the conventional belts o Resistant to oil & heat with very good antistatic properties TypeWidth (mm) Thickness (mm) AngleRange (mm) 3VX9.5840630-3550 5VX15.913.5401270-9000 8VX25.422402540-1270 SPZX10.08.040630-3550 SPAX13.010.040800-4500 SPBX16.013.0401250-8000 SPCX22.018.0402000-12500 www.tuskertransbelt.com

9. Wedge belts can achieve high speed and load between shorter centre-to- centre distance Features: o Initial low cost o Highly resistant to heat and oil resistance with antistatic properties o Lowers the cost, as it reduces the number of belts required to operate as compared to the classical belts Features: o Initial low cost o Highly resistant to heat and oil resistance with antistatic properties o Lowers the cost, as it reduces the number of belts required to operate as compared to the classical belts TypeWidth (mm) Thickness (mm) AngleRange (0) SPX10.08.040630-3550 SPA13.010.040800-4500 SPB16.013.0401250-8000 SPC22.018.0402000-12500 www.tuskertransbelt.com

10. With one motor drive, Double Sided Synchronous Belts transmit the power of different directions with losing any power rating Features: o Oil & heat resistant and antistatic for maximum life efficiency o Rubberized Chloroprene jacket fabric o Reinforcement Polyester stiff cabled cord o High Hardness Base Compound Features: o Oil & heat resistant and antistatic for maximum life efficiency o Rubberized Chloroprene jacket fabric o Reinforcement Polyester stiff cabled cord o High Hardness Base Compound Cross Section Top Width (mm) Thickness (mm) AngleRange (0) AA13.010.24060” - 240” BB16.713.44060” - 240” CC22.019.040130” - 480” www.tuskertransbelt.com

11. www.tuskertransbelt.com Features: o Oil & heat resistance and anti-static properties. o HMLS Polyester cord gives low stretch and better flexibility. o Special compounded base gives good flex fatigue resistance Applications: Washing machines, Dish washers Industrial Refrigerators Industrial Fans, Blowers. Features: o Oil & heat resistance and anti-static properties. o HMLS Polyester cord gives low stretch and better flexibility. o Special compounded base gives good flex fatigue resistance Applications: Washing machines, Dish washers Industrial Refrigerators Industrial Fans, Blowers.

12. Tusker V-belts have extraordinary dimensional stability in both storage and drive over long periods of time www.tuskertransbelt.com Features: o High hardness cushion compound with maximum flexibility o Resistant to crack initiation friction compound (Chloroprene) o During the process of curing, all sets of belts are preciously matched free, set to higher efficiency and longer life Features: o High hardness cushion compound with maximum flexibility o Resistant to crack initiation friction compound (Chloroprene) o During the process of curing, all sets of belts are preciously matched free, set to higher efficiency and longer life SectionTop Width (mm) Thickness (mm) AngleRange (0) A1384015-180380 – 4570 B17114017-585430 – 14860 C22144036-600915 – 15240 D32194090-6002290 – 15240

13. www.tuskertransbelt.com

14. www.tuskertransbelt.com Step 1 Raw material are subjected to ISO specifications limit by testing: i)The specific gravity ii)Melting point iii)Solubility iv)Loss on heating v)Loss on ignition vi)Viscosity vii)Ash content through acetone extract viii)pH value Step 1 Raw material are subjected to ISO specifications limit by testing: i)The specific gravity ii)Melting point iii)Solubility iv)Loss on heating v)Loss on ignition vi)Viscosity vii)Ash content through acetone extract viii)pH value Step 2 The processing material (“Process-in-control”) tested to our specification limits like: i)Hardness ii)Specific gravity iii)Plasticity iv)Elongation at break v)Modulus vi)Aging vii)Adhesion test with fabric viii)Reinforcement polyester cord Step 2 The processing material (“Process-in-control”) tested to our specification limits like: i)Hardness ii)Specific gravity iii)Plasticity iv)Elongation at break v)Modulus vi)Aging vii)Adhesion test with fabric viii)Reinforcement polyester cord Step 3 Finally, the cured finished belts of each section and size are tested by means of dimensions, accelerated dynamic test, stretch test, abrasion test, standard oil testing, breaking strength, adhesion test Step 3 Finally, the cured finished belts of each section and size are tested by means of dimensions, accelerated dynamic test, stretch test, abrasion test, standard oil testing, breaking strength, adhesion test The 3 stages:

15. www.tuskertransbelt.com