1. 1 Supercell Thunderstorms Adapted from Materials by Dr. Frank Gallagher III and Dr. Kelvin Droegemeier School of Meteorology University of Oklahoma Part III

2. 2 Importance of Storm-Relative Winds Vorticity Vector © 1990 *Aster Press -- From: Cotton, Storms Play Movie Storm-Relative Winds We obtain strong updraft rotation if the storm-relative winds are parallel to the horizontal vorticity – or perpendicular to the environmental shear vector – this is easily determined via a wind hodograph Shear Vector

3. 3 Assessing S-R Winds n The degree of alignment between the storm-relative wind and the horizontal vorticity is critical for estimating the potential of an updraft to rotate n A particular tool – the wind hodograph – provides a simple graphical mechanism to assess this and other parameters

4. 4 Wind Hodograph n A wind hodograph displays the change of wind speed and direction with height (vertical wind shear) in a simple polar diagram. n Wind speed and direction are plotted as arrows (vectors) with their tails at the origin and the point in the direction toward which the wind is blowing. This is backward from our station model!!!

5. 5 Hodograph -- Example

6. 6 Hodograph n The length of the arrows is proportional to the wind speed. The larger the wind speed, the longer the arrow. n Normally only a dot is placed at the head of the arrow and the arrow itself is not drawn. n The hodograph is completed by connecting the dots!

7. 7 Hodograph -- Example

8. 8 SFC 500 m 1000 m 1500 m 2000 m Hodograph -- Example

9. 9 Real Hodograph

10. 10 Hodograph n Why Draw a Hodograph? – –Similar to a thermodynamic diagram – it makes life easier! – –We don’t have to look through a complex table of numbers to see what the wind is doing. – –By looking at the shape of the hodograph curve we can see, at a glance, what type of storms may form. » »Air Mass (garden variety) storms » »Multicellular Storms » »Supercell Storms » »Tornadic Storms – –The shear on a hodograph is very simple to determine, as is the horizontal vorticity – –This allows us to assess helicity and streamwise vorticity

11. 11 Hodograph -- Example Just by looking at this table, it is hard (without much experience) to see what the winds are doing and what the wind shear is.

12. 12 Hodograph -- Example n Let us plot the winds using a station model diagram. n This is better but it is time consuming to draw and still is not that helpful. SFC 500 m 1000 m 1500 m 2000 m

13. 13 Hodograph -- Example n Let us now draw the hodograph! Let us draw the surface observation. 160 o at 10 kts Since the wind speed is 10 kt, the length of the arrow is only to the 10 knot ring. The direction points to 160 o. 160 

14. 14 Hodograph -- Example n Let us now draw the 500 m observation. Let us draw the 500 m observation: 180 o at 20 kts Since the wind speed is 20 kt, the length of the arrow is only to the 20 knot ring. The direction points to 180 o.

15. 15 Hodograph -- Example n We now place dots at the end of the arrows then erase the arrows.

16. 16 Hodograph -- Example n We then connect the dots with a smooth curve and label the points. SFC 500 m 1000 m 1500 m 2000 m This is the final hodograph!!!

17. 17 Hodograph -- Example n What can we learn from this diagram? – –We see that the wind speeds increase with height. » »We know this since the plotted points get farther from the origin as we go up. – –We see that the winds change direction with height. – –In this example we see that the hodograph is curved and it is curved clockwise. » »If we start at the surface (SFC) and follow the hodograph curve, we go in a clockwise direction!

18. 18 Determining the Wind Shear – –The wind shear vector at a given altitude is tangent to the hodograph at that altitude and always points toward increasing altitudes – –The vector shear between two levels is simply the vector that connects the two levels – –Makes assessing the thermal wind vector (location of cold air) trivial!! – –The average shear throughout a layer is very useful in forecasting storm type

19. 19 SFC 1 km 2 km 3 km Shear vector at 2 km

20. 20 SFC 1 km 2 km 3 km Shear vector between 1 and 2 km

21. 21 SFC 1 km 2 km 3 km Shear vector between sfc and 2 km

22. 22 Determining Horizontal Vorticity – –As shown earlier, the horizontal vorticity vector is oriented perpendicular and 90 degrees to the right of the wind shear vector – –This is very easily found on a hodograph!

23. 23 SFC 1 km 2 km 3 km Horizontal vorticity vectors Vertical wind shear vectors

24. 24 Determining Storm-Relative Winds – –We can determine the S-R winds on a hodograph very easily given storm motion – –Storm motion is plotted as a single dot

25. 25 SFC 1 km 2 km 3 km Storm Motion (225 @ 30)

26. 26 SFC 1 km 2 km 3 km Storm Motion Vector (225 @ 30)

27. 27 Determining Storm-Relative Winds – –We can determine the S-R winds on a hodograph very easily given storm motion – –Storm motion is plotted as a single dot – –The S-R wind is found easily by drawing vectors back to the hodograph from the tip of the storm motion vector

28. 28 SFC 1 km 2 km 3 km Storm Motion Vector (225 @ 30) Storm-relative winds can be determined at any level, not just those for which observations are available

29. 29 Use of Storm-Relative Winds – –Why do we care about the S-R winds? – –Remember, only the S-R winds are relevant to storm dynamics – –In the case of supercell updraft rotation, we want to see an alignment between the S-R winds and the horizontal vorticity vector – –This is easily determined on a hodograph

30. 30 SFC 1 km 2 km 3 km Horizontal Vorticity vectors Storm-relative winds can be determined at any level, not just those for which observations are available

31. 31 Importance of Storm-Relative Winds Vorticity Vector © 1990 *Aster Press -- From: Cotton, Storms Play Movie Storm-Relative Winds We obtain strong updraft rotation if the storm-relative winds are parallel to the horizontal vorticity – or perpendicular to the environmental shear vector – this is easily determined via a wind hodograph Shear Vector

32. 32 Estimating the Potential For Updraft Rotation – –Ingredients » »Strong storm-relative winds in the low-levels (at least 10 m/s) » »Strong turning of the wind shear vector with height (90 degrees between the surface and 3 km) » »Strong alignment of the S-R winds and the horizontal vorticity – to develop rotating updrafts » »All of this can be quantified by a single quantity- the Storm-Relative Environmental Helicity

33. 33 Storm Relative Environmental Helicity n SREH -- A measure of the potential for a thunderstorm updraft to rotate. n SREH is typically measured over a depth in the atmosphere: – –1 to 3 km – –0 to 4 km n A good helicity estimate depends on accurate winds and storm motion data

34. 34 Storm Relative Environmental Helicity n SREH is the area swept out by the S-R winds between the surface and 3 km n It includes all of the key ingredients mentioned earlier n It is graphically easy to determine

35. 35 Storm Relative Helicity 180 270 Storm Motion SFC 1 km 2 km 3 km 4 km 5 km 6 km 7 km This area represents the 1-3 km helicity SREHPotential Tornado Strength 150 - 300 m 2 s -2 Weak 300 - 500 m 2 s -2 Strong > 450 m 2 s -2 Violent

36. 36 Typical Single-Cell Hodograph n Weak shear, weak winds

37. 37 Typical Multicell Hodograph n Somewhat stronger winds and shear, with S-R winds providing mechanism n Hodograph is essentially straight, especially at low levels

38. 38 Typical Supercell Hodograph n Strong wind, shear vector turns with height, strong S-R winds n Note curved shape of hodograph at low levels

39. 39 SFC 1 km 2 km 3 km Storm Motion Vector (225 @ 30) Which Storm Motion Produces a Strong, Cyclonically-Rotating Supercell?

40. 40 Estimating the Potential For Updraft Rotation – –Ingredients » »Strong storm-relative winds in the low-levels (at least 10 m/s) » »Strong turning of the wind shear vector with height (90 degrees between the surface and 3 km) » »Strong alignment of the S-R winds and the horizontal vorticity – to develop rotating updrafts

41. 41 SFC 1 km 2 km 3 km Horizontal Vorticity vectors Storm-relative winds Speed of S-R Winds Alignment of S-R Winds and Vorticity

42. 42 SFC 1 km 2 km 3 km Horizontal Vorticity vectors Storm-relative winds Storm-Relative Environmental Helicity

43. 43 SFC 1 km 2 km 3 km Horizontal Vorticity vectors Storm-relative winds Speed of S-R Winds Alignment of S-R Winds and Vorticity

44. 44 SFC 1 km 2 km 3 km Horizontal Vorticity vectors Storm-relative winds Speed of S-R Winds Alignment of S-R Winds and Vorticity

45. 45 SFC 1 km 2 km 3 km Horizontal Vorticity vectors Storm-relative winds Storm-Relative Environmental Helicity

46. 46 SFC 1 km 2 km 3 km Horizontal Vorticity vectors Storm-relative winds Speed of S-R Winds Alignment of S-R Winds and Vorticity

47. 47 SFC 1 km 2 km 3 km Horizontal Vorticity vectors Storm-relative winds Storm-Relative Environmental Helicity

48. 48 SFC 1 km 2 km 3 km Making an Optimal Hodograph

49. 49 SFC 1 km 2 km 3 km Making an Optimal Hodograph Note unidirectional shear, but Ground-relative winds veer with height

50. 50 SFC 1 km 2 km 3 km Making an Optimal Hodograph Horizontal Vorticity vectors

51. 51 SFC 1 km 2 km 3 km Making an Optimal Hodograph Horizontal Vorticity vectors Place the storm motion to get a strong cyclonic supercell

52. 52 SFC 1 km 2 km 3 km Making an Optimal Hodograph Horizontal Vorticity vectors Change the hodograph to obtain a strong supercell given this storm motion

53. 53 SFC 1 km 2 km 3 km Making an Optimal Hodograph Horizontal Vorticity vectors Change the hodograph to obtain a strong supercell given this storm motion

54. 54 SFC 1 km 2 km 3 km Making an Optimal Hodograph Horizontal Vorticity vectors

55. 55 SFC 1 km 2 km 3 km Making an Optimal Hodograph Horizontal Vorticity vectors Storm-relative winds

56. 56 Predicting Thunderstorm Type: The Bulk Richardson Number n Need sufficiently large CAPE (2000 J/kg) n Denominator is really the storm-relative inflow kinetic energy (sometimes called the BRN Shear) n BRN is thus a measure of the updraft potential versus the inflow potential

57. 57 Results from Observations and Models

58. 58 General Guidelines for Use

59. 59

60. 60