1. Ohmmeters pages 75-80

2. V A x R

3. How much resistance in a load if the amperage is:.5 amps.5 amps

4. How much resistance in a load if the amperage is: 3 amps

5. How much resistance in a load if the amperage is: 250 amps

6. How much resistance in a load if the amperage is:.004 amps

7. Ohmmeters pages 75-80

8. Ohmmeters are self powered

9. Ohmmeters are used to test the resistance in components and they must be disconnected from any other power source.

10. Most common scales n 200 n 2K n 20K n 200K n 2M n 20M

11. Manual Ranging

12. Auto Ranging

13. Out of range indication if the resistance is higher than the scale you are on. UL OUCH 3

14. The Meter will round off the reading if you are on too high of a scale. This can make your readings somewhat inaccurate

15. Circuit board assignment

16. Ohmmeters pages 75-80

17. Ohmmeters are used to: n Test continuity in switches

18. Continuity Test n Will beep with approx. 30 ohms or less

19. Ohmmeters are used to: Test continuity in mercury switches

20. Ohmmeters are used to: n Test continuity in fuses

21. Ohmmeters are used to: Test the continuity in resisters of all types Example Throttle position sensor

22. Ohmmeters are used to: Test the resistance (to specifications) of Throttle Position Sensors

23. Ohmmeters are used to: Test Potentiometers of all types

24. Ohmmeters are used to: test the continuity of temperature switches

25. Ohmmeters are used to: Test the resistance (to specifications) of a thermistor

26. Ohmmeters are used to: Test the resistance of Solenoids

27. Ohmmeters are used to: Test the continuity and or resistance of relays

28. See Ya!