1. Friction: A Force That Opposes Motion
Section 16-3
Friction: A Force That Opposes Motion

2. Friction
Friction- force that opposes motion between two surfaces that are touching

3. The Source of Friction
Friction occurs because the surface of any object is rough.
Friction is caused by 2 rough surfaces coming in contact with each other.
Factors that cause amounts of friction to change
Roughness of the surfaces
Force pushing the surfaces together.

4. Rougher Surfaces Create More Friction
Rough surface- greater the friction.
Smooth surface- less the friction.

5. Greater Force Creates More Friction
If the force is increased, the friction between the surfaces increases
Less massive objects exert less force on surfaces than more massive objects do.

6. Sliding Friction
Sliding friction is very effective at opposing the movement of objects
You must exert a lot of force to overcome sliding friction
Examples:
pushing a dresser across the floor
sledding
applying brakes on a bicycle or car

7. Rolling Friction
The force of rolling friction is usually less than the force of sliding friction.
Therefore, it is generally easier to move objects on wheels than it is to slide them along the floor.
Rolling friction is an important part of almost all means of transportation.
Anything with wheels uses rolling friction between the wheels and the ground to move forward.

8. Fluid Friction Fluid friction is less than sliding friction.
The term fluid includes liquids, such as water and milk, and gases, such as air and helium.
Fluid friction opposes the motion of objects traveling through a fluid.

9. Static Friction
When a force is applied to an object but does not cause the object to move, static friction occurs.
When static friction balances the force applied, no movement occurs.
Static friction disappears as soon as an object starts moving, and then another type of friction immediately occurs.

10. Some Ways to Reduce Friction
One way to reduce friction is to use lubricants.
Lubricants are substances that are applied to surfaces to reduce friction between them.
Some examples of common lubricants are motor oil, wax, and grease.
Friction can also be reduced by switching from sliding friction to rolling friction.
Ball bearings help reduce friction.
Another way to reduce friction is to make surfaces that rub against each other smoother.

11. Some Ways to Increase Friction
One way to increase friction is to make surfaces rougher.
Examples:
sand on icy roads
baseball players wear textured batting glove
Another way to increase friction is to increase the force pushing the surfaces together.
add weight to an object
sand wood faster by pressing harder on the sandpaper